Dorman 700-116 Engine Splash Shield Retainer - Lower
Engine Splash Shield Retainer for OE-Style Fit
Dorman 700-116 is a steel engine splash shield retainer clip built for lower-body panel retention on select Acura and Honda vehicles. It uses a metric, medium-thread, open-end design with a black painted finish and rectangular shape for a secure panel hold.
Compatible With 2014-2020 Honda Accord, lower; 2017-2020 Honda Civic, lower; 2017-2020 Honda CR-V, lower; 2014-2020 Acura RLX, lower; 2015-2020 Acura TLX, lower; and 2016-2020 Acura ILX, lower. This part number, 700-116, is also a direct reference point for OE-style replacement searches.
Key Features
- Steel construction for body hardware applications
- Black painted finish
- Metric, medium-thread design
- Open-end rectangular retainer style
- 14 mm callout size with 6.46 inside diameter
- Standard replacement grade for splash shield and trim retention
- Cross-reference: Honda OE part 90673TY2A01 for the same application
Detailed Product Description
Dorman 700-116 is an engine splash shield retainer clip used to secure lower panels and related trim on compatible Acura and Honda models. The steel body and painted finish provide a practical OE-style solution for retaining underbody shields where a metric fastener interface is required. If you are searching for a Dorman 700-116 splash shield retainer for Honda Accord, Civic, or CR-V lower panel service, this part matches the listed applications and dimensions.
The design is intended for body hardware use where a rectangular, open-end clip with a right-hand thread direction is specified. It is a standard replacement part for lower splash shield retention on 2014-2020 Honda Accord, 2017-2020 Honda Civic, 2017-2020 Honda CR-V, 2014-2020 Acura RLX, 2015-2020 Acura TLX, and 2016-2020 Acura ILX.
What It Helps Fix
- Loose or missing lower splash shield retainers
- Underbody panel movement or rattling
- Improperly secured engine splash shields
- Damaged trim retainer clips during service
- Loss of panel retention after fastener wear or removal
Installation Notes and Tips
Verify the vehicle application, lower-position mounting point, and 14 mm callout size before installation. Inspect the panel opening and surrounding hardware for wear or deformation, and replace any damaged mating components as needed. This retainer is used in lower body panel locations on the listed Acura and Honda models, including Accord, Civic, and CR-V applications.
Quality Assurance
Dorman supplies a broad range of clip and spring nut hardware for automotive repair applications, with multiple screw sizes, throat depths, and panel ranges available across the line. Part number 700-116 follows that OE-style replacement approach for lower splash shield retention on the specified vehicles.
Original: $25.45
-65%$25.45
$8.91Dorman 700-116 Engine Splash Shield Retainer - Lower
Engine Splash Shield Retainer for OE-Style Fit
Dorman 700-116 is a steel engine splash shield retainer clip built for lower-body panel retention on select Acura and Honda vehicles. It uses a metric, medium-thread, open-end design with a black painted finish and rectangular shape for a secure panel hold.
Compatible With 2014-2020 Honda Accord, lower; 2017-2020 Honda Civic, lower; 2017-2020 Honda CR-V, lower; 2014-2020 Acura RLX, lower; 2015-2020 Acura TLX, lower; and 2016-2020 Acura ILX, lower. This part number, 700-116, is also a direct reference point for OE-style replacement searches.
Key Features
- Steel construction for body hardware applications
- Black painted finish
- Metric, medium-thread design
- Open-end rectangular retainer style
- 14 mm callout size with 6.46 inside diameter
- Standard replacement grade for splash shield and trim retention
- Cross-reference: Honda OE part 90673TY2A01 for the same application
Detailed Product Description
Dorman 700-116 is an engine splash shield retainer clip used to secure lower panels and related trim on compatible Acura and Honda models. The steel body and painted finish provide a practical OE-style solution for retaining underbody shields where a metric fastener interface is required. If you are searching for a Dorman 700-116 splash shield retainer for Honda Accord, Civic, or CR-V lower panel service, this part matches the listed applications and dimensions.
The design is intended for body hardware use where a rectangular, open-end clip with a right-hand thread direction is specified. It is a standard replacement part for lower splash shield retention on 2014-2020 Honda Accord, 2017-2020 Honda Civic, 2017-2020 Honda CR-V, 2014-2020 Acura RLX, 2015-2020 Acura TLX, and 2016-2020 Acura ILX.
What It Helps Fix
- Loose or missing lower splash shield retainers
- Underbody panel movement or rattling
- Improperly secured engine splash shields
- Damaged trim retainer clips during service
- Loss of panel retention after fastener wear or removal
Installation Notes and Tips
Verify the vehicle application, lower-position mounting point, and 14 mm callout size before installation. Inspect the panel opening and surrounding hardware for wear or deformation, and replace any damaged mating components as needed. This retainer is used in lower body panel locations on the listed Acura and Honda models, including Accord, Civic, and CR-V applications.
Quality Assurance
Dorman supplies a broad range of clip and spring nut hardware for automotive repair applications, with multiple screw sizes, throat depths, and panel ranges available across the line. Part number 700-116 follows that OE-style replacement approach for lower splash shield retention on the specified vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Splash Shield Retainer for OE-Style Fit
Dorman 700-116 is a steel engine splash shield retainer clip built for lower-body panel retention on select Acura and Honda vehicles. It uses a metric, medium-thread, open-end design with a black painted finish and rectangular shape for a secure panel hold.
Compatible With 2014-2020 Honda Accord, lower; 2017-2020 Honda Civic, lower; 2017-2020 Honda CR-V, lower; 2014-2020 Acura RLX, lower; 2015-2020 Acura TLX, lower; and 2016-2020 Acura ILX, lower. This part number, 700-116, is also a direct reference point for OE-style replacement searches.
Key Features
- Steel construction for body hardware applications
- Black painted finish
- Metric, medium-thread design
- Open-end rectangular retainer style
- 14 mm callout size with 6.46 inside diameter
- Standard replacement grade for splash shield and trim retention
- Cross-reference: Honda OE part 90673TY2A01 for the same application
Detailed Product Description
Dorman 700-116 is an engine splash shield retainer clip used to secure lower panels and related trim on compatible Acura and Honda models. The steel body and painted finish provide a practical OE-style solution for retaining underbody shields where a metric fastener interface is required. If you are searching for a Dorman 700-116 splash shield retainer for Honda Accord, Civic, or CR-V lower panel service, this part matches the listed applications and dimensions.
The design is intended for body hardware use where a rectangular, open-end clip with a right-hand thread direction is specified. It is a standard replacement part for lower splash shield retention on 2014-2020 Honda Accord, 2017-2020 Honda Civic, 2017-2020 Honda CR-V, 2014-2020 Acura RLX, 2015-2020 Acura TLX, and 2016-2020 Acura ILX.
What It Helps Fix
- Loose or missing lower splash shield retainers
- Underbody panel movement or rattling
- Improperly secured engine splash shields
- Damaged trim retainer clips during service
- Loss of panel retention after fastener wear or removal
Installation Notes and Tips
Verify the vehicle application, lower-position mounting point, and 14 mm callout size before installation. Inspect the panel opening and surrounding hardware for wear or deformation, and replace any damaged mating components as needed. This retainer is used in lower body panel locations on the listed Acura and Honda models, including Accord, Civic, and CR-V applications.
Quality Assurance
Dorman supplies a broad range of clip and spring nut hardware for automotive repair applications, with multiple screw sizes, throat depths, and panel ranges available across the line. Part number 700-116 follows that OE-style replacement approach for lower splash shield retention on the specified vehicles.
