Dorman 797-113 Differential Bearing Kit - Rear
Dorman 797-113 Differential Bearing Kit
Restore differential smoothness and bearing support with the Dorman 797-113 differential bearing kit. Built for front or rear differential service, this kit uses high-precision tapered bearings with tighter tolerances to help reduce backlash and improve long-term durability under differential torque.
Compatible With classic rear-axle service on Chevrolet Impala, Monte Carlo, Nova, Caprice, El Camino, Camaro, and Pontiac Catalina applications with an 8.2 in. axle, this kit simplifies differential rebuild work by bringing the needed bearing components together in one package.
- High-precision tapered bearing design for differential service
- Engineered with tighter tolerances than common lower-grade bearings
- Includes bearing races for a complete bearing replacement
- Steel bearing construction for drivetrain durability
- Supports front or rear differential repair and rebuild work
- Package contents include bearings, races, shims, crush collar, gasket material, gear marking compound, thread lock compound, application brush, and hardware
Detailed Product Overview
The Dorman 797-113 is a differential bearing kit for rebuilding or repairing a differential where bearing wear, noise, or gear setup issues are present. It includes tapered bearings with multiple measured dimensions, including 64.29 mm, 73.43 mm, and 76.20 mm outside diameters, along with matching race sizes and steel construction for service in torque-loaded differential assemblies. The kit is intended to save time during differential work by reducing the need to source individual components separately.
This part number is a practical choice for rear differential service on Chevrolet Impala, Camaro, Nova, Caprice, Monte Carlo, and El Camino models, as well as Pontiac Catalina applications listed for the 8.2 in. axle. Dorman 797-113 is also a useful reference when searching for a differential bearing kit for classic GM rear axle rebuilds.
What It Helps Fix
- Differential bearing noise from worn or rough bearings
- Excessive backlash caused by bearing wear
- Gear setup problems during differential rebuilds
- Loss of bearing support in high-torque axle service
- Time spent sourcing separate differential service components
Installation Notes and Tips
Verify axle type, ring gear diameter, pinion spline count, and bearing dimensions before ordering. This kit is listed for 8.2 in. axle applications and rear position use on the vehicles shown in the fitment data. Differential setup requires careful measurement of bearing preload, backlash, and gear contact pattern; follow service manual procedures during installation.
Fits 1965-1972 Chevrolet Impala, Rear. Fits 1970-1972 Chevrolet Monte Carlo, Rear. Fits 1969-1972 Chevrolet Nova, Rear. Fits 1965-1972 Pontiac Catalina, Rear. Fits 1966-1971 Chevrolet Caprice, Rear. Fits 1964-1971 Chevrolet El Camino, Rear. Fits 1967-1970 Chevrolet Camaro, Rear.
Quality Assurance
Dorman manufactures this differential bearing kit with high-precision components and tighter tolerances to support long service life in differential applications. Part number 797-113 is built for drivetrain service where accurate bearing fit and consistent operation matter.
Original: $236.43
-65%$236.43
$82.75Dorman 797-113 Differential Bearing Kit - Rear
Dorman 797-113 Differential Bearing Kit
Restore differential smoothness and bearing support with the Dorman 797-113 differential bearing kit. Built for front or rear differential service, this kit uses high-precision tapered bearings with tighter tolerances to help reduce backlash and improve long-term durability under differential torque.
Compatible With classic rear-axle service on Chevrolet Impala, Monte Carlo, Nova, Caprice, El Camino, Camaro, and Pontiac Catalina applications with an 8.2 in. axle, this kit simplifies differential rebuild work by bringing the needed bearing components together in one package.
- High-precision tapered bearing design for differential service
- Engineered with tighter tolerances than common lower-grade bearings
- Includes bearing races for a complete bearing replacement
- Steel bearing construction for drivetrain durability
- Supports front or rear differential repair and rebuild work
- Package contents include bearings, races, shims, crush collar, gasket material, gear marking compound, thread lock compound, application brush, and hardware
Detailed Product Overview
The Dorman 797-113 is a differential bearing kit for rebuilding or repairing a differential where bearing wear, noise, or gear setup issues are present. It includes tapered bearings with multiple measured dimensions, including 64.29 mm, 73.43 mm, and 76.20 mm outside diameters, along with matching race sizes and steel construction for service in torque-loaded differential assemblies. The kit is intended to save time during differential work by reducing the need to source individual components separately.
This part number is a practical choice for rear differential service on Chevrolet Impala, Camaro, Nova, Caprice, Monte Carlo, and El Camino models, as well as Pontiac Catalina applications listed for the 8.2 in. axle. Dorman 797-113 is also a useful reference when searching for a differential bearing kit for classic GM rear axle rebuilds.
What It Helps Fix
- Differential bearing noise from worn or rough bearings
- Excessive backlash caused by bearing wear
- Gear setup problems during differential rebuilds
- Loss of bearing support in high-torque axle service
- Time spent sourcing separate differential service components
Installation Notes and Tips
Verify axle type, ring gear diameter, pinion spline count, and bearing dimensions before ordering. This kit is listed for 8.2 in. axle applications and rear position use on the vehicles shown in the fitment data. Differential setup requires careful measurement of bearing preload, backlash, and gear contact pattern; follow service manual procedures during installation.
Fits 1965-1972 Chevrolet Impala, Rear. Fits 1970-1972 Chevrolet Monte Carlo, Rear. Fits 1969-1972 Chevrolet Nova, Rear. Fits 1965-1972 Pontiac Catalina, Rear. Fits 1966-1971 Chevrolet Caprice, Rear. Fits 1964-1971 Chevrolet El Camino, Rear. Fits 1967-1970 Chevrolet Camaro, Rear.
Quality Assurance
Dorman manufactures this differential bearing kit with high-precision components and tighter tolerances to support long service life in differential applications. Part number 797-113 is built for drivetrain service where accurate bearing fit and consistent operation matter.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 797-113 Differential Bearing Kit
Restore differential smoothness and bearing support with the Dorman 797-113 differential bearing kit. Built for front or rear differential service, this kit uses high-precision tapered bearings with tighter tolerances to help reduce backlash and improve long-term durability under differential torque.
Compatible With classic rear-axle service on Chevrolet Impala, Monte Carlo, Nova, Caprice, El Camino, Camaro, and Pontiac Catalina applications with an 8.2 in. axle, this kit simplifies differential rebuild work by bringing the needed bearing components together in one package.
- High-precision tapered bearing design for differential service
- Engineered with tighter tolerances than common lower-grade bearings
- Includes bearing races for a complete bearing replacement
- Steel bearing construction for drivetrain durability
- Supports front or rear differential repair and rebuild work
- Package contents include bearings, races, shims, crush collar, gasket material, gear marking compound, thread lock compound, application brush, and hardware
Detailed Product Overview
The Dorman 797-113 is a differential bearing kit for rebuilding or repairing a differential where bearing wear, noise, or gear setup issues are present. It includes tapered bearings with multiple measured dimensions, including 64.29 mm, 73.43 mm, and 76.20 mm outside diameters, along with matching race sizes and steel construction for service in torque-loaded differential assemblies. The kit is intended to save time during differential work by reducing the need to source individual components separately.
This part number is a practical choice for rear differential service on Chevrolet Impala, Camaro, Nova, Caprice, Monte Carlo, and El Camino models, as well as Pontiac Catalina applications listed for the 8.2 in. axle. Dorman 797-113 is also a useful reference when searching for a differential bearing kit for classic GM rear axle rebuilds.
What It Helps Fix
- Differential bearing noise from worn or rough bearings
- Excessive backlash caused by bearing wear
- Gear setup problems during differential rebuilds
- Loss of bearing support in high-torque axle service
- Time spent sourcing separate differential service components
Installation Notes and Tips
Verify axle type, ring gear diameter, pinion spline count, and bearing dimensions before ordering. This kit is listed for 8.2 in. axle applications and rear position use on the vehicles shown in the fitment data. Differential setup requires careful measurement of bearing preload, backlash, and gear contact pattern; follow service manual procedures during installation.
Fits 1965-1972 Chevrolet Impala, Rear. Fits 1970-1972 Chevrolet Monte Carlo, Rear. Fits 1969-1972 Chevrolet Nova, Rear. Fits 1965-1972 Pontiac Catalina, Rear. Fits 1966-1971 Chevrolet Caprice, Rear. Fits 1964-1971 Chevrolet El Camino, Rear. Fits 1967-1970 Chevrolet Camaro, Rear.
Quality Assurance
Dorman manufactures this differential bearing kit with high-precision components and tighter tolerances to support long service life in differential applications. Part number 797-113 is built for drivetrain service where accurate bearing fit and consistent operation matter.
