
Dorman 916-593 Engine Multiple Displacement System Solenoid
Dorman 916-593 MDS Solenoid Kit
Dorman 916-593 is an OE FIX engine multiple displacement system solenoid kit for Chrysler, Dodge, Jeep, and Ram applications with cylinder deactivation. It addresses common MDS failures caused by heat-damaged plastic housings and sludge-related oil passage restriction, helping restore proper system pressure and drivability on vehicles such as the Chrysler 300, Dodge Charger, and Ram 1500.
Key Features
- Engine multiple displacement system solenoid kit for MDS-equipped Chrysler engines
- Upgraded metal housing for improved durability versus brittle plastic originals
- Premium compression-tested O-rings help restore sealing and pressure control
- Electronic, 12-volt design with quick-connect female connector and blade terminals
- Direct replacement format for service on Chrysler 300, Dodge Challenger, Dodge Charger, Jeep Grand Cherokee, and Ram 1500 applications
- Part number 916-593 for catalog and cross-reference lookup
Detailed Description
This Dorman OE FIX kit is built for vehicles that use cylinder deactivation to improve efficiency under light-load driving. When original MDS solenoids fail, drivers may notice rough idle, reduced power, and lower fuel economy. The upgraded aluminum housing and sealed construction are intended to replace fragile factory units that can crack during removal or degrade from underhood heat and oil contamination. Part number 916-593 is a practical service solution for Chrysler, Dodge, Jeep, and Ram engines that require a complete MDS solenoid repair.
This part cross-references Standard Ignition CDS01 and OE number 53022298AA for the same application.
What It Helps Fix
- Loss of power during acceleration
- Rough or unstable idle
- Decreased fuel economy from cylinder deactivation faults
- MDS warning symptoms tied to clogged or leaking solenoids
- Breakage during removal of brittle original solenoids
Installation Notes and Tips
Inspect the MDS system carefully before installation and verify the engine is equipped with the correct cylinder deactivation setup. Because failed solenoids can be difficult to diagnose individually, technicians often inspect the full system during service. Confirm connector style, terminal layout, and vehicle application before replacing the original parts. Fits 2010-2023 Chrysler 300, N/A; Fits 2010-2023 Dodge Challenger, N/A; Fits 2010-2023 Dodge Charger, N/A; Fits 2011-2023 Dodge Durango, N/A; Fits 2010-2023 Jeep Grand Cherokee, N/A; Fits 2021-2023 Jeep Grand Cherokee L, N/A; Fits 2022-2023 Jeep Grand Wagoneer, N/A; Fits 2022-2023 Jeep Wagoneer, N/A; Fits 2021-2023 Jeep Wrangler, N/A; Fits 2011-2023 Ram 1500, N/A; Fits 2019-2023 Ram 1500 Classic, N/A; Fits 2014-2023 Ram 2500, N/A; Fits 2014-2023 Ram 3500, N/A; Fits 2011-2022 Ram 4000, N/A; Fits 2010 Dodge Ram 1500, N/A; Fits 2010 Jeep Commander, N/A.
Quality Assurance
Dorman designs OE FIX replacement parts to address known failure points in original equipment components. This solenoid kit uses upgraded materials and premium sealing components to support reliable MDS operation in service.
Original: $287.43
-65%$287.43
$100.60Dorman 916-593 Engine Multiple Displacement System Solenoid
Dorman 916-593 MDS Solenoid Kit
Dorman 916-593 is an OE FIX engine multiple displacement system solenoid kit for Chrysler, Dodge, Jeep, and Ram applications with cylinder deactivation. It addresses common MDS failures caused by heat-damaged plastic housings and sludge-related oil passage restriction, helping restore proper system pressure and drivability on vehicles such as the Chrysler 300, Dodge Charger, and Ram 1500.
Key Features
- Engine multiple displacement system solenoid kit for MDS-equipped Chrysler engines
- Upgraded metal housing for improved durability versus brittle plastic originals
- Premium compression-tested O-rings help restore sealing and pressure control
- Electronic, 12-volt design with quick-connect female connector and blade terminals
- Direct replacement format for service on Chrysler 300, Dodge Challenger, Dodge Charger, Jeep Grand Cherokee, and Ram 1500 applications
- Part number 916-593 for catalog and cross-reference lookup
Detailed Description
This Dorman OE FIX kit is built for vehicles that use cylinder deactivation to improve efficiency under light-load driving. When original MDS solenoids fail, drivers may notice rough idle, reduced power, and lower fuel economy. The upgraded aluminum housing and sealed construction are intended to replace fragile factory units that can crack during removal or degrade from underhood heat and oil contamination. Part number 916-593 is a practical service solution for Chrysler, Dodge, Jeep, and Ram engines that require a complete MDS solenoid repair.
This part cross-references Standard Ignition CDS01 and OE number 53022298AA for the same application.
What It Helps Fix
- Loss of power during acceleration
- Rough or unstable idle
- Decreased fuel economy from cylinder deactivation faults
- MDS warning symptoms tied to clogged or leaking solenoids
- Breakage during removal of brittle original solenoids
Installation Notes and Tips
Inspect the MDS system carefully before installation and verify the engine is equipped with the correct cylinder deactivation setup. Because failed solenoids can be difficult to diagnose individually, technicians often inspect the full system during service. Confirm connector style, terminal layout, and vehicle application before replacing the original parts. Fits 2010-2023 Chrysler 300, N/A; Fits 2010-2023 Dodge Challenger, N/A; Fits 2010-2023 Dodge Charger, N/A; Fits 2011-2023 Dodge Durango, N/A; Fits 2010-2023 Jeep Grand Cherokee, N/A; Fits 2021-2023 Jeep Grand Cherokee L, N/A; Fits 2022-2023 Jeep Grand Wagoneer, N/A; Fits 2022-2023 Jeep Wagoneer, N/A; Fits 2021-2023 Jeep Wrangler, N/A; Fits 2011-2023 Ram 1500, N/A; Fits 2019-2023 Ram 1500 Classic, N/A; Fits 2014-2023 Ram 2500, N/A; Fits 2014-2023 Ram 3500, N/A; Fits 2011-2022 Ram 4000, N/A; Fits 2010 Dodge Ram 1500, N/A; Fits 2010 Jeep Commander, N/A.
Quality Assurance
Dorman designs OE FIX replacement parts to address known failure points in original equipment components. This solenoid kit uses upgraded materials and premium sealing components to support reliable MDS operation in service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 916-593 MDS Solenoid Kit
Dorman 916-593 is an OE FIX engine multiple displacement system solenoid kit for Chrysler, Dodge, Jeep, and Ram applications with cylinder deactivation. It addresses common MDS failures caused by heat-damaged plastic housings and sludge-related oil passage restriction, helping restore proper system pressure and drivability on vehicles such as the Chrysler 300, Dodge Charger, and Ram 1500.
Key Features
- Engine multiple displacement system solenoid kit for MDS-equipped Chrysler engines
- Upgraded metal housing for improved durability versus brittle plastic originals
- Premium compression-tested O-rings help restore sealing and pressure control
- Electronic, 12-volt design with quick-connect female connector and blade terminals
- Direct replacement format for service on Chrysler 300, Dodge Challenger, Dodge Charger, Jeep Grand Cherokee, and Ram 1500 applications
- Part number 916-593 for catalog and cross-reference lookup
Detailed Description
This Dorman OE FIX kit is built for vehicles that use cylinder deactivation to improve efficiency under light-load driving. When original MDS solenoids fail, drivers may notice rough idle, reduced power, and lower fuel economy. The upgraded aluminum housing and sealed construction are intended to replace fragile factory units that can crack during removal or degrade from underhood heat and oil contamination. Part number 916-593 is a practical service solution for Chrysler, Dodge, Jeep, and Ram engines that require a complete MDS solenoid repair.
This part cross-references Standard Ignition CDS01 and OE number 53022298AA for the same application.
What It Helps Fix
- Loss of power during acceleration
- Rough or unstable idle
- Decreased fuel economy from cylinder deactivation faults
- MDS warning symptoms tied to clogged or leaking solenoids
- Breakage during removal of brittle original solenoids
Installation Notes and Tips
Inspect the MDS system carefully before installation and verify the engine is equipped with the correct cylinder deactivation setup. Because failed solenoids can be difficult to diagnose individually, technicians often inspect the full system during service. Confirm connector style, terminal layout, and vehicle application before replacing the original parts. Fits 2010-2023 Chrysler 300, N/A; Fits 2010-2023 Dodge Challenger, N/A; Fits 2010-2023 Dodge Charger, N/A; Fits 2011-2023 Dodge Durango, N/A; Fits 2010-2023 Jeep Grand Cherokee, N/A; Fits 2021-2023 Jeep Grand Cherokee L, N/A; Fits 2022-2023 Jeep Grand Wagoneer, N/A; Fits 2022-2023 Jeep Wagoneer, N/A; Fits 2021-2023 Jeep Wrangler, N/A; Fits 2011-2023 Ram 1500, N/A; Fits 2019-2023 Ram 1500 Classic, N/A; Fits 2014-2023 Ram 2500, N/A; Fits 2014-2023 Ram 3500, N/A; Fits 2011-2022 Ram 4000, N/A; Fits 2010 Dodge Ram 1500, N/A; Fits 2010 Jeep Commander, N/A.
Quality Assurance
Dorman designs OE FIX replacement parts to address known failure points in original equipment components. This solenoid kit uses upgraded materials and premium sealing components to support reliable MDS operation in service.












