Dorman 919-047 Brake Hydraulic Line
Corrosion-Resistant Brake Line Replacement
Dorman 919-047 is a pre-formed brake hydraulic line kit built for direct replacement on select Ford Taurus and Mercury Sable applications. It uses upgraded stainless steel construction to help resist rust, with OE-style shaping for a cleaner, more accurate fit during brake line service.
For drivers searching for a brake hydraulic line for 2000-2007 Ford Taurus or 2000-2005 Mercury Sable, this Dorman OE FIX solution is built around the original routing and connection points. Part number 919-047 is also a practical choice when replacing a rusted or damaged brake line on these vehicles.
Key Features
- Stainless steel brake hydraulic line material for improved corrosion resistance
- Pre-formed design for specific vehicle applications
- Standard replacement grade for brake system repair
- Inverted and bubble flare end configurations
- Fittings included with OE-style fitment details
- Brake line length: 42 in.
- Outer spring and outer wear guard included in the line design
Detailed Product Overview
This brake hydraulic line is engineered as a direct-fit replacement for select Ford Taurus and Mercury Sable models, helping restore brake fluid routing where the original steel line has deteriorated from corrosion. The stainless steel line material is paired with pre-formed bends to match the vehicle application, reducing the need for custom line shaping during installation. Dorman 919-047 is designed for brake hydraulic repair where accurate routing, proper flare style, and durable construction matter.
This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
Common Problems This Part Can Help Address
- Rusted or corroded brake hydraulic lines
- Brake fluid leaks caused by line deterioration
- Improper brake line routing after previous repairs
- Damaged flare ends or worn fittings
- Brake system service on aging Ford Taurus and Mercury Sable vehicles
Installation Notes and Tips
Verify line routing, flare type, and thread diameter before installation. This pre-formed brake line is intended for specific vehicle applications, so compare the original line path on the vehicle with the replacement part before final tightening. For best results, inspect adjacent brake components for corrosion or wear during service. Fits 2000-2007 Ford Taurus, N/A. Fits 2000-2005 Mercury Sable, N/A.
Quality Assurance
Dorman OE FIX parts are built to address common failure points in original equipment designs with upgraded materials and application-specific fitment. Part number 919-047 follows that approach with stainless steel construction and pre-formed geometry for the listed Ford and Mercury applications.
Original: $625.54
-65%$625.54
$218.94Dorman 919-047 Brake Hydraulic Line
Corrosion-Resistant Brake Line Replacement
Dorman 919-047 is a pre-formed brake hydraulic line kit built for direct replacement on select Ford Taurus and Mercury Sable applications. It uses upgraded stainless steel construction to help resist rust, with OE-style shaping for a cleaner, more accurate fit during brake line service.
For drivers searching for a brake hydraulic line for 2000-2007 Ford Taurus or 2000-2005 Mercury Sable, this Dorman OE FIX solution is built around the original routing and connection points. Part number 919-047 is also a practical choice when replacing a rusted or damaged brake line on these vehicles.
Key Features
- Stainless steel brake hydraulic line material for improved corrosion resistance
- Pre-formed design for specific vehicle applications
- Standard replacement grade for brake system repair
- Inverted and bubble flare end configurations
- Fittings included with OE-style fitment details
- Brake line length: 42 in.
- Outer spring and outer wear guard included in the line design
Detailed Product Overview
This brake hydraulic line is engineered as a direct-fit replacement for select Ford Taurus and Mercury Sable models, helping restore brake fluid routing where the original steel line has deteriorated from corrosion. The stainless steel line material is paired with pre-formed bends to match the vehicle application, reducing the need for custom line shaping during installation. Dorman 919-047 is designed for brake hydraulic repair where accurate routing, proper flare style, and durable construction matter.
This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
Common Problems This Part Can Help Address
- Rusted or corroded brake hydraulic lines
- Brake fluid leaks caused by line deterioration
- Improper brake line routing after previous repairs
- Damaged flare ends or worn fittings
- Brake system service on aging Ford Taurus and Mercury Sable vehicles
Installation Notes and Tips
Verify line routing, flare type, and thread diameter before installation. This pre-formed brake line is intended for specific vehicle applications, so compare the original line path on the vehicle with the replacement part before final tightening. For best results, inspect adjacent brake components for corrosion or wear during service. Fits 2000-2007 Ford Taurus, N/A. Fits 2000-2005 Mercury Sable, N/A.
Quality Assurance
Dorman OE FIX parts are built to address common failure points in original equipment designs with upgraded materials and application-specific fitment. Part number 919-047 follows that approach with stainless steel construction and pre-formed geometry for the listed Ford and Mercury applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Corrosion-Resistant Brake Line Replacement
Dorman 919-047 is a pre-formed brake hydraulic line kit built for direct replacement on select Ford Taurus and Mercury Sable applications. It uses upgraded stainless steel construction to help resist rust, with OE-style shaping for a cleaner, more accurate fit during brake line service.
For drivers searching for a brake hydraulic line for 2000-2007 Ford Taurus or 2000-2005 Mercury Sable, this Dorman OE FIX solution is built around the original routing and connection points. Part number 919-047 is also a practical choice when replacing a rusted or damaged brake line on these vehicles.
Key Features
- Stainless steel brake hydraulic line material for improved corrosion resistance
- Pre-formed design for specific vehicle applications
- Standard replacement grade for brake system repair
- Inverted and bubble flare end configurations
- Fittings included with OE-style fitment details
- Brake line length: 42 in.
- Outer spring and outer wear guard included in the line design
Detailed Product Overview
This brake hydraulic line is engineered as a direct-fit replacement for select Ford Taurus and Mercury Sable models, helping restore brake fluid routing where the original steel line has deteriorated from corrosion. The stainless steel line material is paired with pre-formed bends to match the vehicle application, reducing the need for custom line shaping during installation. Dorman 919-047 is designed for brake hydraulic repair where accurate routing, proper flare style, and durable construction matter.
This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
Common Problems This Part Can Help Address
- Rusted or corroded brake hydraulic lines
- Brake fluid leaks caused by line deterioration
- Improper brake line routing after previous repairs
- Damaged flare ends or worn fittings
- Brake system service on aging Ford Taurus and Mercury Sable vehicles
Installation Notes and Tips
Verify line routing, flare type, and thread diameter before installation. This pre-formed brake line is intended for specific vehicle applications, so compare the original line path on the vehicle with the replacement part before final tightening. For best results, inspect adjacent brake components for corrosion or wear during service. Fits 2000-2007 Ford Taurus, N/A. Fits 2000-2005 Mercury Sable, N/A.
Quality Assurance
Dorman OE FIX parts are built to address common failure points in original equipment designs with upgraded materials and application-specific fitment. Part number 919-047 follows that approach with stainless steel construction and pre-formed geometry for the listed Ford and Mercury applications.
