Dorman 932-984 Drive Shaft Repair Kit - Rear
Dorman 932-984 Drive Shaft Repair Kit
Dorman 932-984 is a drive shaft repair kit built to match the original hardware used on specified rear driveline applications. It uses quality steel components, is pre-greased, and is configured for reliable service in vehicles that need a direct-fit driveshaft repair solution.
Key Features
- Direct replacement drive shaft repair kit for specified rear driveshaft applications
- Pre-greased with multi-purpose bearing grease
- Steel universal joint cross and steel bearing caps
- External snap ring design for secure retention
- Rubber seals help retain grease and protect service life
- Silver finish with grease coating on supplied components
- Designed around a 1.063 in. bearing cap diameter and 3.625 in. snap ring span
Detailed Description
This Dorman drive shaft repair kit is engineered to restore the original hardware layout required for rear driveshaft service on a wide range of trucks and SUVs. The kit includes components matched to the specified application dimensions, including 1.063 in. bearing cap diameter and 3.625 in. snap ring-to-snap ring span, which is critical for proper fitment on vehicles such as Ram 1500, Toyota Tacoma, Ford Ranger, and Nissan Frontier applications. Part number 932-984 is built with steel universal joint crosses and steel bearing caps for dependable driveline service.
Because the kit is pre-greased and uses external snap rings, it supports a clean, straightforward repair when replacing worn driveshaft joints on compatible rear applications. This part cross-references Dorman driveshaft service applications such as 946-115 and 936-724 for the same vehicle-specific use cases.
What It Helps Fix
- Driveshaft vibration caused by worn universal joints
- Clunking or driveline noise during acceleration or deceleration
- Excessive play in the rear driveshaft assembly
- Service issues from damaged bearing caps or retaining snap rings
- Rear driveline wear on high-mileage trucks and SUVs
Installation Notes and Fitment
Compatible With rear applications only. Confirm the bearing cap diameter and snap ring span before ordering, since this kit is tied to specific Dorman driveshaft numbers and configuration notes. Fits 2013-2017 Ram 1500, rear; Fits 2005-2016 Nissan Frontier, rear; Fits 2011-2015 Toyota Tacoma, rear; Fits 2004-2012 Chevrolet Colorado, rear; Fits 2006-2012 GMC Canyon, rear; Fits 1998-2011 Ford Ranger, rear; Fits 2002-2010 Ford Explorer, rear; Fits 2005-2010 Nissan Xterra, rear; Fits 2003-2009 Toyota 4Runner, rear; Fits 1997-2003 Ford F-150, rear.
For best results, compare the existing driveshaft joint dimensions, snap ring style, and the vehicle-specific notes listed for your application before installation. Dorman 932-984 is intended for rear driveshaft repair on the exact listed configurations.
Quality Assurance
Dorman designs this kit to match original hardware requirements and uses quality components for durability and consistent performance in driveline service.
Original: $48.52
-65%$48.52
$16.98Dorman 932-984 Drive Shaft Repair Kit - Rear
Dorman 932-984 Drive Shaft Repair Kit
Dorman 932-984 is a drive shaft repair kit built to match the original hardware used on specified rear driveline applications. It uses quality steel components, is pre-greased, and is configured for reliable service in vehicles that need a direct-fit driveshaft repair solution.
Key Features
- Direct replacement drive shaft repair kit for specified rear driveshaft applications
- Pre-greased with multi-purpose bearing grease
- Steel universal joint cross and steel bearing caps
- External snap ring design for secure retention
- Rubber seals help retain grease and protect service life
- Silver finish with grease coating on supplied components
- Designed around a 1.063 in. bearing cap diameter and 3.625 in. snap ring span
Detailed Description
This Dorman drive shaft repair kit is engineered to restore the original hardware layout required for rear driveshaft service on a wide range of trucks and SUVs. The kit includes components matched to the specified application dimensions, including 1.063 in. bearing cap diameter and 3.625 in. snap ring-to-snap ring span, which is critical for proper fitment on vehicles such as Ram 1500, Toyota Tacoma, Ford Ranger, and Nissan Frontier applications. Part number 932-984 is built with steel universal joint crosses and steel bearing caps for dependable driveline service.
Because the kit is pre-greased and uses external snap rings, it supports a clean, straightforward repair when replacing worn driveshaft joints on compatible rear applications. This part cross-references Dorman driveshaft service applications such as 946-115 and 936-724 for the same vehicle-specific use cases.
What It Helps Fix
- Driveshaft vibration caused by worn universal joints
- Clunking or driveline noise during acceleration or deceleration
- Excessive play in the rear driveshaft assembly
- Service issues from damaged bearing caps or retaining snap rings
- Rear driveline wear on high-mileage trucks and SUVs
Installation Notes and Fitment
Compatible With rear applications only. Confirm the bearing cap diameter and snap ring span before ordering, since this kit is tied to specific Dorman driveshaft numbers and configuration notes. Fits 2013-2017 Ram 1500, rear; Fits 2005-2016 Nissan Frontier, rear; Fits 2011-2015 Toyota Tacoma, rear; Fits 2004-2012 Chevrolet Colorado, rear; Fits 2006-2012 GMC Canyon, rear; Fits 1998-2011 Ford Ranger, rear; Fits 2002-2010 Ford Explorer, rear; Fits 2005-2010 Nissan Xterra, rear; Fits 2003-2009 Toyota 4Runner, rear; Fits 1997-2003 Ford F-150, rear.
For best results, compare the existing driveshaft joint dimensions, snap ring style, and the vehicle-specific notes listed for your application before installation. Dorman 932-984 is intended for rear driveshaft repair on the exact listed configurations.
Quality Assurance
Dorman designs this kit to match original hardware requirements and uses quality components for durability and consistent performance in driveline service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 932-984 Drive Shaft Repair Kit
Dorman 932-984 is a drive shaft repair kit built to match the original hardware used on specified rear driveline applications. It uses quality steel components, is pre-greased, and is configured for reliable service in vehicles that need a direct-fit driveshaft repair solution.
Key Features
- Direct replacement drive shaft repair kit for specified rear driveshaft applications
- Pre-greased with multi-purpose bearing grease
- Steel universal joint cross and steel bearing caps
- External snap ring design for secure retention
- Rubber seals help retain grease and protect service life
- Silver finish with grease coating on supplied components
- Designed around a 1.063 in. bearing cap diameter and 3.625 in. snap ring span
Detailed Description
This Dorman drive shaft repair kit is engineered to restore the original hardware layout required for rear driveshaft service on a wide range of trucks and SUVs. The kit includes components matched to the specified application dimensions, including 1.063 in. bearing cap diameter and 3.625 in. snap ring-to-snap ring span, which is critical for proper fitment on vehicles such as Ram 1500, Toyota Tacoma, Ford Ranger, and Nissan Frontier applications. Part number 932-984 is built with steel universal joint crosses and steel bearing caps for dependable driveline service.
Because the kit is pre-greased and uses external snap rings, it supports a clean, straightforward repair when replacing worn driveshaft joints on compatible rear applications. This part cross-references Dorman driveshaft service applications such as 946-115 and 936-724 for the same vehicle-specific use cases.
What It Helps Fix
- Driveshaft vibration caused by worn universal joints
- Clunking or driveline noise during acceleration or deceleration
- Excessive play in the rear driveshaft assembly
- Service issues from damaged bearing caps or retaining snap rings
- Rear driveline wear on high-mileage trucks and SUVs
Installation Notes and Fitment
Compatible With rear applications only. Confirm the bearing cap diameter and snap ring span before ordering, since this kit is tied to specific Dorman driveshaft numbers and configuration notes. Fits 2013-2017 Ram 1500, rear; Fits 2005-2016 Nissan Frontier, rear; Fits 2011-2015 Toyota Tacoma, rear; Fits 2004-2012 Chevrolet Colorado, rear; Fits 2006-2012 GMC Canyon, rear; Fits 1998-2011 Ford Ranger, rear; Fits 2002-2010 Ford Explorer, rear; Fits 2005-2010 Nissan Xterra, rear; Fits 2003-2009 Toyota 4Runner, rear; Fits 1997-2003 Ford F-150, rear.
For best results, compare the existing driveshaft joint dimensions, snap ring style, and the vehicle-specific notes listed for your application before installation. Dorman 932-984 is intended for rear driveshaft repair on the exact listed configurations.
Quality Assurance
Dorman designs this kit to match original hardware requirements and uses quality components for durability and consistent performance in driveline service.
