Dorman 932-990 Drive Shaft Repair Kit - Front or Rear
Dorman 932-990 Drive Shaft Repair Kit
Dorman 932-990 is a drive shaft repair kit built to match the original hardware used to service the driveshaft on specified vehicles. It uses quality steel and rubber components, comes pre-greased with multi-purpose bearing grease, and is set up for reliable driveline service on rear and front applications where the listed Dorman driveshafts are used.
Key Features
- OE-style drive shaft repair kit for specified rear and front driveline applications
- Pre-greased for service-ready installation
- Steel universal joint cross and steel bearing caps for durability
- External snap ring design
- Rubber seals with grease coating for added protection
- Designed around a 1.188 in. bearing cap diameter and 3.625 in. snap ring span
- Compatible with select Mercedes-Benz Sprinter, Chevrolet Silverado, Ford F-150, Ram 1500, Toyota Tundra, and GMC Sierra applications
Detailed Description
This Dorman drive shaft repair kit is engineered to restore the original hardware arrangement required for driveline repair on specific vehicles. It is built with steel universal joint cross material, steel bearing caps, and rubber seals, and it arrives pre-greased with multi-purpose bearing grease for service use. The kit is silver in color, uses an external snap ring type, and does not include grease zerks or a greaseable design.
Fitment includes a wide range of applications such as the Chevrolet Silverado 1500 rear, Ford F-150 rear, GMC Sierra 1500 rear, Ram 1500 rear, Toyota Tundra rear, and Mercedes-Benz Sprinter 2500 and Sprinter 3500 rear, along with additional front and rear driveline listings across model years 2000-2018. For exact application matching, confirm the listed Dorman driveshaft reference and the required snap ring span and bearing cup diameter before ordering. This part cross-references Dorman driveshaft applications such as 936-013 and 946-337 for the same application.
What It Helps Repair
- Driveshaft vibration caused by worn universal joint hardware
- Clunking or driveline noise from loose or damaged joint components
- Service issues related to incorrect snap ring fitment
- Wear at the bearing cap and seal area on the driveshaft joint
- Replacement needs on rear or front driveline service jobs for listed vehicles
Installation Notes and Tips
Verify the vehicle’s year, make, model, position, and the matching Dorman driveshaft number before installation. Confirm the 3.625 in. snap ring to snap ring span and 1.188 in. bearing cup O.D. where required. Clean the driveline surfaces thoroughly, inspect the yoke and surrounding components for wear, and follow the vehicle service procedure for snap ring placement and joint alignment.
Quality Assurance
Dorman manufactures this repair kit with quality components for dependable driveline service. The pre-greased design, steel construction, and OE-style hardware matching support consistent performance in the specified applications.
Original: $47.39
-65%$47.39
$16.59Dorman 932-990 Drive Shaft Repair Kit - Front or Rear
Dorman 932-990 Drive Shaft Repair Kit
Dorman 932-990 is a drive shaft repair kit built to match the original hardware used to service the driveshaft on specified vehicles. It uses quality steel and rubber components, comes pre-greased with multi-purpose bearing grease, and is set up for reliable driveline service on rear and front applications where the listed Dorman driveshafts are used.
Key Features
- OE-style drive shaft repair kit for specified rear and front driveline applications
- Pre-greased for service-ready installation
- Steel universal joint cross and steel bearing caps for durability
- External snap ring design
- Rubber seals with grease coating for added protection
- Designed around a 1.188 in. bearing cap diameter and 3.625 in. snap ring span
- Compatible with select Mercedes-Benz Sprinter, Chevrolet Silverado, Ford F-150, Ram 1500, Toyota Tundra, and GMC Sierra applications
Detailed Description
This Dorman drive shaft repair kit is engineered to restore the original hardware arrangement required for driveline repair on specific vehicles. It is built with steel universal joint cross material, steel bearing caps, and rubber seals, and it arrives pre-greased with multi-purpose bearing grease for service use. The kit is silver in color, uses an external snap ring type, and does not include grease zerks or a greaseable design.
Fitment includes a wide range of applications such as the Chevrolet Silverado 1500 rear, Ford F-150 rear, GMC Sierra 1500 rear, Ram 1500 rear, Toyota Tundra rear, and Mercedes-Benz Sprinter 2500 and Sprinter 3500 rear, along with additional front and rear driveline listings across model years 2000-2018. For exact application matching, confirm the listed Dorman driveshaft reference and the required snap ring span and bearing cup diameter before ordering. This part cross-references Dorman driveshaft applications such as 936-013 and 946-337 for the same application.
What It Helps Repair
- Driveshaft vibration caused by worn universal joint hardware
- Clunking or driveline noise from loose or damaged joint components
- Service issues related to incorrect snap ring fitment
- Wear at the bearing cap and seal area on the driveshaft joint
- Replacement needs on rear or front driveline service jobs for listed vehicles
Installation Notes and Tips
Verify the vehicle’s year, make, model, position, and the matching Dorman driveshaft number before installation. Confirm the 3.625 in. snap ring to snap ring span and 1.188 in. bearing cup O.D. where required. Clean the driveline surfaces thoroughly, inspect the yoke and surrounding components for wear, and follow the vehicle service procedure for snap ring placement and joint alignment.
Quality Assurance
Dorman manufactures this repair kit with quality components for dependable driveline service. The pre-greased design, steel construction, and OE-style hardware matching support consistent performance in the specified applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 932-990 Drive Shaft Repair Kit
Dorman 932-990 is a drive shaft repair kit built to match the original hardware used to service the driveshaft on specified vehicles. It uses quality steel and rubber components, comes pre-greased with multi-purpose bearing grease, and is set up for reliable driveline service on rear and front applications where the listed Dorman driveshafts are used.
Key Features
- OE-style drive shaft repair kit for specified rear and front driveline applications
- Pre-greased for service-ready installation
- Steel universal joint cross and steel bearing caps for durability
- External snap ring design
- Rubber seals with grease coating for added protection
- Designed around a 1.188 in. bearing cap diameter and 3.625 in. snap ring span
- Compatible with select Mercedes-Benz Sprinter, Chevrolet Silverado, Ford F-150, Ram 1500, Toyota Tundra, and GMC Sierra applications
Detailed Description
This Dorman drive shaft repair kit is engineered to restore the original hardware arrangement required for driveline repair on specific vehicles. It is built with steel universal joint cross material, steel bearing caps, and rubber seals, and it arrives pre-greased with multi-purpose bearing grease for service use. The kit is silver in color, uses an external snap ring type, and does not include grease zerks or a greaseable design.
Fitment includes a wide range of applications such as the Chevrolet Silverado 1500 rear, Ford F-150 rear, GMC Sierra 1500 rear, Ram 1500 rear, Toyota Tundra rear, and Mercedes-Benz Sprinter 2500 and Sprinter 3500 rear, along with additional front and rear driveline listings across model years 2000-2018. For exact application matching, confirm the listed Dorman driveshaft reference and the required snap ring span and bearing cup diameter before ordering. This part cross-references Dorman driveshaft applications such as 936-013 and 946-337 for the same application.
What It Helps Repair
- Driveshaft vibration caused by worn universal joint hardware
- Clunking or driveline noise from loose or damaged joint components
- Service issues related to incorrect snap ring fitment
- Wear at the bearing cap and seal area on the driveshaft joint
- Replacement needs on rear or front driveline service jobs for listed vehicles
Installation Notes and Tips
Verify the vehicle’s year, make, model, position, and the matching Dorman driveshaft number before installation. Confirm the 3.625 in. snap ring to snap ring span and 1.188 in. bearing cup O.D. where required. Clean the driveline surfaces thoroughly, inspect the yoke and surrounding components for wear, and follow the vehicle service procedure for snap ring placement and joint alignment.
Quality Assurance
Dorman manufactures this repair kit with quality components for dependable driveline service. The pre-greased design, steel construction, and OE-style hardware matching support consistent performance in the specified applications.
