Dorman 934-005 Drive Shaft Center Support Bearing
Dorman 934-005 Drive Shaft Center Support Bearing
Dorman 934-005 is a drive shaft center support bearing built to match the fit and function of the original bearing on specified BMW applications. It is engineered for durable, reliable performance and uses a housing-mounted bearing design with a steel mounting bracket.
Key Features
- Direct replacement drive shaft center support bearing for specified BMW driveline applications
- Housing-mounted bearing design for OE-style fitment
- Steel mounting bracket with black finish
- Bracket mounting hole spacing measures 5.25 inches center to center
- Outside diameter measures 4 inches
- Inside diameter dimensions: 1.181 inches and 1.81 inches
- Width measures 0.75 inch; outer ring width measures 1.55 inches
Detailed Description
This Dorman drive shaft center support bearing, part number 934-005, is made for BMW driveline repair where the original center bearing has worn, loosened, or begun to create vibration. It is a regular-grade replacement with a steel bracket and housing-mounted bearing construction, built to restore proper driveshaft support on the listed BMW 528i, 530i, 533i, 535i, 635CSi, 735i, and M6 applications. For buyers searching for a BMW driveshaft center support bearing or Dorman 934-005 for BMW driveline service, this part is matched to the specified vehicle and driveshaft combinations.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 1987-1988 BMW M6, N/A. Only works with Dorman Driveshaft 936-578.
- Fits 1985-1986 BMW 735i, N/A. Only works with Dorman Driveshaft 936-396.
- Fits 1985 BMW 535i, N/A. To 9/85; only works with Dorman Driveshaft 936-372.
- Fits 1985 BMW 635CSi, N/A. To 9/85; only works with Dorman Driveshaft 936-372.
- Fits 1985 BMW 735i, N/A. Only works with Dorman Driveshaft 936-373.
- Fits 1983-1984 BMW 533i, N/A. Only works with Dorman Driveshaft 936-360.
- Fits 1980-1981 BMW 528i, N/A. Only works with Dorman Driveshaft 936-577.
- Fits 1979 BMW 528i, N/A. Only works with Dorman Driveshaft 936-591.
- Fits 1975-1978 BMW 530i, N/A. Only works with Dorman Driveshaft 936-364.
- Fits 1975-1978 BMW 530i, N/A. Only works with Dorman Driveshaft 936-591.
Common Issues This Part Can Address
- Driveshaft vibration from a worn center support bearing
- Excessive driveline noise during acceleration or cruising
- Loose or deteriorated center bearing support
- Reduced driveline stability caused by bracket wear
- Service replacement for BMW driveshaft center bearing failure
Installation Notes and Tips
Verify the vehicle year, model, and Dorman driveshaft number before ordering, since this bearing is tied to specific driveshaft applications. Confirm bracket spacing, bearing dimensions, and the existing driveshaft configuration during service. Installation instructions are not included.
Quality Assurance
Dorman engineers this replacement bearing to match the original fit and function on the listed vehicles, with a focus on durability and dependable operation. Part number 934-005 is built as a direct replacement solution for specified BMW driveline repairs.
Original: $193.37
-65%$193.37
$67.68Dorman 934-005 Drive Shaft Center Support Bearing
Dorman 934-005 Drive Shaft Center Support Bearing
Dorman 934-005 is a drive shaft center support bearing built to match the fit and function of the original bearing on specified BMW applications. It is engineered for durable, reliable performance and uses a housing-mounted bearing design with a steel mounting bracket.
Key Features
- Direct replacement drive shaft center support bearing for specified BMW driveline applications
- Housing-mounted bearing design for OE-style fitment
- Steel mounting bracket with black finish
- Bracket mounting hole spacing measures 5.25 inches center to center
- Outside diameter measures 4 inches
- Inside diameter dimensions: 1.181 inches and 1.81 inches
- Width measures 0.75 inch; outer ring width measures 1.55 inches
Detailed Description
This Dorman drive shaft center support bearing, part number 934-005, is made for BMW driveline repair where the original center bearing has worn, loosened, or begun to create vibration. It is a regular-grade replacement with a steel bracket and housing-mounted bearing construction, built to restore proper driveshaft support on the listed BMW 528i, 530i, 533i, 535i, 635CSi, 735i, and M6 applications. For buyers searching for a BMW driveshaft center support bearing or Dorman 934-005 for BMW driveline service, this part is matched to the specified vehicle and driveshaft combinations.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 1987-1988 BMW M6, N/A. Only works with Dorman Driveshaft 936-578.
- Fits 1985-1986 BMW 735i, N/A. Only works with Dorman Driveshaft 936-396.
- Fits 1985 BMW 535i, N/A. To 9/85; only works with Dorman Driveshaft 936-372.
- Fits 1985 BMW 635CSi, N/A. To 9/85; only works with Dorman Driveshaft 936-372.
- Fits 1985 BMW 735i, N/A. Only works with Dorman Driveshaft 936-373.
- Fits 1983-1984 BMW 533i, N/A. Only works with Dorman Driveshaft 936-360.
- Fits 1980-1981 BMW 528i, N/A. Only works with Dorman Driveshaft 936-577.
- Fits 1979 BMW 528i, N/A. Only works with Dorman Driveshaft 936-591.
- Fits 1975-1978 BMW 530i, N/A. Only works with Dorman Driveshaft 936-364.
- Fits 1975-1978 BMW 530i, N/A. Only works with Dorman Driveshaft 936-591.
Common Issues This Part Can Address
- Driveshaft vibration from a worn center support bearing
- Excessive driveline noise during acceleration or cruising
- Loose or deteriorated center bearing support
- Reduced driveline stability caused by bracket wear
- Service replacement for BMW driveshaft center bearing failure
Installation Notes and Tips
Verify the vehicle year, model, and Dorman driveshaft number before ordering, since this bearing is tied to specific driveshaft applications. Confirm bracket spacing, bearing dimensions, and the existing driveshaft configuration during service. Installation instructions are not included.
Quality Assurance
Dorman engineers this replacement bearing to match the original fit and function on the listed vehicles, with a focus on durability and dependable operation. Part number 934-005 is built as a direct replacement solution for specified BMW driveline repairs.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 934-005 Drive Shaft Center Support Bearing
Dorman 934-005 is a drive shaft center support bearing built to match the fit and function of the original bearing on specified BMW applications. It is engineered for durable, reliable performance and uses a housing-mounted bearing design with a steel mounting bracket.
Key Features
- Direct replacement drive shaft center support bearing for specified BMW driveline applications
- Housing-mounted bearing design for OE-style fitment
- Steel mounting bracket with black finish
- Bracket mounting hole spacing measures 5.25 inches center to center
- Outside diameter measures 4 inches
- Inside diameter dimensions: 1.181 inches and 1.81 inches
- Width measures 0.75 inch; outer ring width measures 1.55 inches
Detailed Description
This Dorman drive shaft center support bearing, part number 934-005, is made for BMW driveline repair where the original center bearing has worn, loosened, or begun to create vibration. It is a regular-grade replacement with a steel bracket and housing-mounted bearing construction, built to restore proper driveshaft support on the listed BMW 528i, 530i, 533i, 535i, 635CSi, 735i, and M6 applications. For buyers searching for a BMW driveshaft center support bearing or Dorman 934-005 for BMW driveline service, this part is matched to the specified vehicle and driveshaft combinations.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 1987-1988 BMW M6, N/A. Only works with Dorman Driveshaft 936-578.
- Fits 1985-1986 BMW 735i, N/A. Only works with Dorman Driveshaft 936-396.
- Fits 1985 BMW 535i, N/A. To 9/85; only works with Dorman Driveshaft 936-372.
- Fits 1985 BMW 635CSi, N/A. To 9/85; only works with Dorman Driveshaft 936-372.
- Fits 1985 BMW 735i, N/A. Only works with Dorman Driveshaft 936-373.
- Fits 1983-1984 BMW 533i, N/A. Only works with Dorman Driveshaft 936-360.
- Fits 1980-1981 BMW 528i, N/A. Only works with Dorman Driveshaft 936-577.
- Fits 1979 BMW 528i, N/A. Only works with Dorman Driveshaft 936-591.
- Fits 1975-1978 BMW 530i, N/A. Only works with Dorman Driveshaft 936-364.
- Fits 1975-1978 BMW 530i, N/A. Only works with Dorman Driveshaft 936-591.
Common Issues This Part Can Address
- Driveshaft vibration from a worn center support bearing
- Excessive driveline noise during acceleration or cruising
- Loose or deteriorated center bearing support
- Reduced driveline stability caused by bracket wear
- Service replacement for BMW driveshaft center bearing failure
Installation Notes and Tips
Verify the vehicle year, model, and Dorman driveshaft number before ordering, since this bearing is tied to specific driveshaft applications. Confirm bracket spacing, bearing dimensions, and the existing driveshaft configuration during service. Installation instructions are not included.
Quality Assurance
Dorman engineers this replacement bearing to match the original fit and function on the listed vehicles, with a focus on durability and dependable operation. Part number 934-005 is built as a direct replacement solution for specified BMW driveline repairs.
