Dorman 934-016 Drive Shaft Center Support Bearing
Dorman Drive Shaft Center Support Bearing 934-016
Dorman 934-016 is a drive shaft center support bearing built to match the original bearing’s fit and function on specified vehicles. It is engineered for durable, reliable performance in BMW driveline applications, including BMW Z3 and BMW 318i/318is models listed below.
Key Features
- OE-style drive shaft center support bearing for specified BMW applications
- Housing-mounted bearing design with steel mounting bracket
- Black bracket finish
- Inside diameter: 1.181 in.; outside diameter: 3.9 in.
- Bracket mounting hole spacing: 6.3 in. center to center
- Regular grade construction for everyday driveline service
- Mounting bracket included; installation hardware not included
Detailed Description
This Dorman drive shaft center support bearing, part number 934-016, is made for direct replacement use on select BMW driveline assemblies. It uses a housing-mounted bearing with a steel bracket to support the driveshaft and help maintain proper alignment under load. The design follows the original fit and function expected for BMW Z3 and BMW 318i/318is applications, including vehicles that require a Dorman driveshaft listed in the fitment notes. This part cross-references Mitsubishi MB154561 for the same application.
Vehicle Fitment
- Fits 2001-2002 BMW Z3, N/A. Only works with Dorman Driveshaft 936-357.
- Fits 2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-374.
- Fits 1999-2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-369.
- Fits 1997-2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-356.
- Fits 1997-1999 BMW Z3, N/A. Only works with Dorman Driveshaft 936-358.
- Fits 1995-1998 BMW 318i, N/A. Only works with Dorman Driveshaft 936-376.
- Fits 1995-1998 BMW 318is, N/A. Only works with Dorman Driveshaft 936-376.
Common Problems This Part Can Address
- Driveline vibration from a worn center support bearing
- Excessive driveshaft movement or misalignment
- Noise from a deteriorated bearing housing
- Support failure in BMW Z3 or BMW 318i/318is driveline service
- Replacement needs when servicing a Dorman driveshaft listed in the fitment notes
Installation Notes and Tips
Verify the driveshaft part number before ordering, since the fitment is tied to specific Dorman driveshaft assemblies. The mounting bracket is included, but installation hardware and instructions are not included. Confirm the bearing dimensions and bracket hole spacing against the original part before installation on your BMW Z3, BMW 318i, or BMW 318is.
Quality Assurance
Dorman designs this center support bearing to match original fit and function while supporting dependable driveline performance. The steel bracket and housing-mounted bearing construction are selected for durability in routine replacement service.
Original: $88.90
-65%$88.90
$31.11Dorman 934-016 Drive Shaft Center Support Bearing
Dorman Drive Shaft Center Support Bearing 934-016
Dorman 934-016 is a drive shaft center support bearing built to match the original bearing’s fit and function on specified vehicles. It is engineered for durable, reliable performance in BMW driveline applications, including BMW Z3 and BMW 318i/318is models listed below.
Key Features
- OE-style drive shaft center support bearing for specified BMW applications
- Housing-mounted bearing design with steel mounting bracket
- Black bracket finish
- Inside diameter: 1.181 in.; outside diameter: 3.9 in.
- Bracket mounting hole spacing: 6.3 in. center to center
- Regular grade construction for everyday driveline service
- Mounting bracket included; installation hardware not included
Detailed Description
This Dorman drive shaft center support bearing, part number 934-016, is made for direct replacement use on select BMW driveline assemblies. It uses a housing-mounted bearing with a steel bracket to support the driveshaft and help maintain proper alignment under load. The design follows the original fit and function expected for BMW Z3 and BMW 318i/318is applications, including vehicles that require a Dorman driveshaft listed in the fitment notes. This part cross-references Mitsubishi MB154561 for the same application.
Vehicle Fitment
- Fits 2001-2002 BMW Z3, N/A. Only works with Dorman Driveshaft 936-357.
- Fits 2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-374.
- Fits 1999-2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-369.
- Fits 1997-2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-356.
- Fits 1997-1999 BMW Z3, N/A. Only works with Dorman Driveshaft 936-358.
- Fits 1995-1998 BMW 318i, N/A. Only works with Dorman Driveshaft 936-376.
- Fits 1995-1998 BMW 318is, N/A. Only works with Dorman Driveshaft 936-376.
Common Problems This Part Can Address
- Driveline vibration from a worn center support bearing
- Excessive driveshaft movement or misalignment
- Noise from a deteriorated bearing housing
- Support failure in BMW Z3 or BMW 318i/318is driveline service
- Replacement needs when servicing a Dorman driveshaft listed in the fitment notes
Installation Notes and Tips
Verify the driveshaft part number before ordering, since the fitment is tied to specific Dorman driveshaft assemblies. The mounting bracket is included, but installation hardware and instructions are not included. Confirm the bearing dimensions and bracket hole spacing against the original part before installation on your BMW Z3, BMW 318i, or BMW 318is.
Quality Assurance
Dorman designs this center support bearing to match original fit and function while supporting dependable driveline performance. The steel bracket and housing-mounted bearing construction are selected for durability in routine replacement service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman Drive Shaft Center Support Bearing 934-016
Dorman 934-016 is a drive shaft center support bearing built to match the original bearing’s fit and function on specified vehicles. It is engineered for durable, reliable performance in BMW driveline applications, including BMW Z3 and BMW 318i/318is models listed below.
Key Features
- OE-style drive shaft center support bearing for specified BMW applications
- Housing-mounted bearing design with steel mounting bracket
- Black bracket finish
- Inside diameter: 1.181 in.; outside diameter: 3.9 in.
- Bracket mounting hole spacing: 6.3 in. center to center
- Regular grade construction for everyday driveline service
- Mounting bracket included; installation hardware not included
Detailed Description
This Dorman drive shaft center support bearing, part number 934-016, is made for direct replacement use on select BMW driveline assemblies. It uses a housing-mounted bearing with a steel bracket to support the driveshaft and help maintain proper alignment under load. The design follows the original fit and function expected for BMW Z3 and BMW 318i/318is applications, including vehicles that require a Dorman driveshaft listed in the fitment notes. This part cross-references Mitsubishi MB154561 for the same application.
Vehicle Fitment
- Fits 2001-2002 BMW Z3, N/A. Only works with Dorman Driveshaft 936-357.
- Fits 2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-374.
- Fits 1999-2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-369.
- Fits 1997-2000 BMW Z3, N/A. Only works with Dorman Driveshaft 936-356.
- Fits 1997-1999 BMW Z3, N/A. Only works with Dorman Driveshaft 936-358.
- Fits 1995-1998 BMW 318i, N/A. Only works with Dorman Driveshaft 936-376.
- Fits 1995-1998 BMW 318is, N/A. Only works with Dorman Driveshaft 936-376.
Common Problems This Part Can Address
- Driveline vibration from a worn center support bearing
- Excessive driveshaft movement or misalignment
- Noise from a deteriorated bearing housing
- Support failure in BMW Z3 or BMW 318i/318is driveline service
- Replacement needs when servicing a Dorman driveshaft listed in the fitment notes
Installation Notes and Tips
Verify the driveshaft part number before ordering, since the fitment is tied to specific Dorman driveshaft assemblies. The mounting bracket is included, but installation hardware and instructions are not included. Confirm the bearing dimensions and bracket hole spacing against the original part before installation on your BMW Z3, BMW 318i, or BMW 318is.
Quality Assurance
Dorman designs this center support bearing to match original fit and function while supporting dependable driveline performance. The steel bracket and housing-mounted bearing construction are selected for durability in routine replacement service.
