Dorman BJ96166RD Alignment Caster / Camber Ball Joint - Front Upper
Dorman RD Rugged Duty Ball Joint for Jeep and Dodge
The Dorman RD - Rugged Duty BJ96166RD is a front upper alignment caster/camber ball joint built for Jeep and Dodge suspension applications that need precise adjustment and durable load handling. It combines a hardened ball stud, polished ball surface, serviceable integrated bearing, and corrosion-resistant construction for dependable steering and alignment performance.
Key Features
- Hardened ball stud with a highly polished ball for smooth articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for consistent lubrication
- Steel construction with premium corrosion resistance
- Pressed mounting type with taper stud design
- Includes dust boot, castle nut, locking nut, cotter pin, and zerk fitting
- Adjusts caster/camber from -1.0 to +1.0 degrees on listed applications
Detailed Description
Built for front upper suspension use, this Dorman BJ96166RD ball joint is engineered for alignment correction and load absorption in vehicles that see demanding road or trail conditions. The RD - Rugged Duty line focuses on stronger service characteristics for Jeep Wrangler, Wrangler JK, TJ, Grand Cherokee, Cherokee, Comanche, Wagoneer, Grand Wagoneer, and Dodge Ram 1500 and Ram 2500 applications listed below. This part cross-references MOOG Chassis Products K100311 and Mopar 68004085AA for the same application.
Compatible With 2018 Jeep Wrangler JK, front upper; 1997-2017 Jeep Wrangler, front upper; 1987-1995 Jeep Wrangler, front upper; 1997-2006 Jeep TJ, front upper; 1993-2004 Jeep Grand Cherokee, front upper; 1994-2001 Dodge Ram 1500, front upper; 1984-2001 Jeep Cherokee, front upper; 1994-1999 Dodge Ram 2500, front upper with Dana 44 axle; 1993 Jeep Grand Wagoneer, front upper; 1986-1992 Jeep Comanche, front upper; and 1984-1990 Jeep Wagoneer, front upper.
What It Helps Solve
- Excessive front-end play from a worn upper ball joint
- Alignment drift affecting caster and camber settings
- Steering looseness or wandering on Jeep and Dodge trucks/SUVs
- Noise or binding caused by a damaged joint bearing or boot
- Corrosion-related wear in exposed suspension components
Installation Notes and Tips
Press-in installation is required. Verify the front upper position, stud thread diameter, and thread pitch before installation, and follow the vehicle-specific alignment procedure after replacement. Because this part is used for caster/camber adjustment on many listed Jeep applications, a professional alignment is recommended after service.
Quality Assurance
Dorman RD - Rugged Duty components are built with steel construction, greaseable service points, and corrosion-resistant finishes to support long-term suspension service in demanding conditions. BJ96166RD is specified for the listed fitments and alignment ranges, including Jeep Wrangler and Jeep Cherokee applications.
Original: $61.85
-65%$61.85
$21.65Dorman BJ96166RD Alignment Caster / Camber Ball Joint - Front Upper
Dorman RD Rugged Duty Ball Joint for Jeep and Dodge
The Dorman RD - Rugged Duty BJ96166RD is a front upper alignment caster/camber ball joint built for Jeep and Dodge suspension applications that need precise adjustment and durable load handling. It combines a hardened ball stud, polished ball surface, serviceable integrated bearing, and corrosion-resistant construction for dependable steering and alignment performance.
Key Features
- Hardened ball stud with a highly polished ball for smooth articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for consistent lubrication
- Steel construction with premium corrosion resistance
- Pressed mounting type with taper stud design
- Includes dust boot, castle nut, locking nut, cotter pin, and zerk fitting
- Adjusts caster/camber from -1.0 to +1.0 degrees on listed applications
Detailed Description
Built for front upper suspension use, this Dorman BJ96166RD ball joint is engineered for alignment correction and load absorption in vehicles that see demanding road or trail conditions. The RD - Rugged Duty line focuses on stronger service characteristics for Jeep Wrangler, Wrangler JK, TJ, Grand Cherokee, Cherokee, Comanche, Wagoneer, Grand Wagoneer, and Dodge Ram 1500 and Ram 2500 applications listed below. This part cross-references MOOG Chassis Products K100311 and Mopar 68004085AA for the same application.
Compatible With 2018 Jeep Wrangler JK, front upper; 1997-2017 Jeep Wrangler, front upper; 1987-1995 Jeep Wrangler, front upper; 1997-2006 Jeep TJ, front upper; 1993-2004 Jeep Grand Cherokee, front upper; 1994-2001 Dodge Ram 1500, front upper; 1984-2001 Jeep Cherokee, front upper; 1994-1999 Dodge Ram 2500, front upper with Dana 44 axle; 1993 Jeep Grand Wagoneer, front upper; 1986-1992 Jeep Comanche, front upper; and 1984-1990 Jeep Wagoneer, front upper.
What It Helps Solve
- Excessive front-end play from a worn upper ball joint
- Alignment drift affecting caster and camber settings
- Steering looseness or wandering on Jeep and Dodge trucks/SUVs
- Noise or binding caused by a damaged joint bearing or boot
- Corrosion-related wear in exposed suspension components
Installation Notes and Tips
Press-in installation is required. Verify the front upper position, stud thread diameter, and thread pitch before installation, and follow the vehicle-specific alignment procedure after replacement. Because this part is used for caster/camber adjustment on many listed Jeep applications, a professional alignment is recommended after service.
Quality Assurance
Dorman RD - Rugged Duty components are built with steel construction, greaseable service points, and corrosion-resistant finishes to support long-term suspension service in demanding conditions. BJ96166RD is specified for the listed fitments and alignment ranges, including Jeep Wrangler and Jeep Cherokee applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Rugged Duty Ball Joint for Jeep and Dodge
The Dorman RD - Rugged Duty BJ96166RD is a front upper alignment caster/camber ball joint built for Jeep and Dodge suspension applications that need precise adjustment and durable load handling. It combines a hardened ball stud, polished ball surface, serviceable integrated bearing, and corrosion-resistant construction for dependable steering and alignment performance.
Key Features
- Hardened ball stud with a highly polished ball for smooth articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for consistent lubrication
- Steel construction with premium corrosion resistance
- Pressed mounting type with taper stud design
- Includes dust boot, castle nut, locking nut, cotter pin, and zerk fitting
- Adjusts caster/camber from -1.0 to +1.0 degrees on listed applications
Detailed Description
Built for front upper suspension use, this Dorman BJ96166RD ball joint is engineered for alignment correction and load absorption in vehicles that see demanding road or trail conditions. The RD - Rugged Duty line focuses on stronger service characteristics for Jeep Wrangler, Wrangler JK, TJ, Grand Cherokee, Cherokee, Comanche, Wagoneer, Grand Wagoneer, and Dodge Ram 1500 and Ram 2500 applications listed below. This part cross-references MOOG Chassis Products K100311 and Mopar 68004085AA for the same application.
Compatible With 2018 Jeep Wrangler JK, front upper; 1997-2017 Jeep Wrangler, front upper; 1987-1995 Jeep Wrangler, front upper; 1997-2006 Jeep TJ, front upper; 1993-2004 Jeep Grand Cherokee, front upper; 1994-2001 Dodge Ram 1500, front upper; 1984-2001 Jeep Cherokee, front upper; 1994-1999 Dodge Ram 2500, front upper with Dana 44 axle; 1993 Jeep Grand Wagoneer, front upper; 1986-1992 Jeep Comanche, front upper; and 1984-1990 Jeep Wagoneer, front upper.
What It Helps Solve
- Excessive front-end play from a worn upper ball joint
- Alignment drift affecting caster and camber settings
- Steering looseness or wandering on Jeep and Dodge trucks/SUVs
- Noise or binding caused by a damaged joint bearing or boot
- Corrosion-related wear in exposed suspension components
Installation Notes and Tips
Press-in installation is required. Verify the front upper position, stud thread diameter, and thread pitch before installation, and follow the vehicle-specific alignment procedure after replacement. Because this part is used for caster/camber adjustment on many listed Jeep applications, a professional alignment is recommended after service.
Quality Assurance
Dorman RD - Rugged Duty components are built with steel construction, greaseable service points, and corrosion-resistant finishes to support long-term suspension service in demanding conditions. BJ96166RD is specified for the listed fitments and alignment ranges, including Jeep Wrangler and Jeep Cherokee applications.
