Dorman D1326RD Steering Tie Rod End Adjusting Sleeve - Center
Dorman RD Steering Tie Rod End Adjusting Sleeve D1326RD
Dorman RD D1326RD is a steering tie rod end adjusting sleeve built for severe-duty service on select Jeep applications. It is engineered for vehicles that face off-road use, heavy hauling, towing, and other demanding conditions where steering hardware needs dependable performance.
The RD, or Rugged Duty, product line focuses on chassis components for hard-working vehicles, including emergency and rescue use cases. This D1326RD adjusting sleeve is a standard replacement made from steel with a black finish and coarse, metric threading for specified Jeep steering setups.
Key Features
- Steel construction for durable steering linkage service
- Black finish for corrosion-resistant appearance
- Counterclockwise, left-hand thread direction
- Metric, coarse-thread design with 11/16 in. thread diameter
- Female-to-female end configuration
- Long adjuster design for specified center steering applications
- RD - Rugged Duty line for severe-duty chassis service
Fitment and Application
- Fits 1997-2006 Jeep TJ, center, Long Adjuster; RD - Rugged Duty
- Fits 1997-2006 Jeep Wrangler, center, Long Adjuster; RD - Rugged Duty
- Fits 1991-2001 Jeep Cherokee, center, Long Adjuster; RD - Rugged Duty
- Fits 1993-1998 Jeep Grand Cherokee, center, At Steering Arm; RD - Rugged Duty
- Fits 1991-1992 Jeep Comanche, center, Long Adjuster; RD - Rugged Duty
Detailed Description
Dorman RD D1326RD is a steering tie rod end adjusting sleeve for select Jeep Cherokee, Wrangler, TJ, Grand Cherokee, and Comanche models. It is intended for center steering locations and specified long-adjuster or steering-arm applications, making it a direct service part for worn or failed original equipment on those vehicles. This part cross-references MOOG Chassis Products DS1326S and Delphi TA5647 for the same application.
As part of the Dorman RD Rugged Duty line, this sleeve is aimed at severe-duty chassis service where steering components are exposed to repeated load, vibration, and harsh operating conditions. The steel body, left-hand thread direction, and coarse metric thread profile support precise steering linkage adjustment on the listed Jeep platforms. Part number D1326RD is also a useful reference when sourcing the correct steering tie rod end adjusting sleeve for these applications.
Common Problems This Part Can Address
- Loose or inaccurate toe adjustment in the steering linkage
- Worn or damaged adjusting sleeve threads
- Corrosion on the original steering sleeve
- Steering play caused by a failed OE sleeve
- Service replacement needs on Jeep TJ, Wrangler, Cherokee, Grand Cherokee, or Comanche steering systems
Installation Notes and Tips
Verify thread direction, thread diameter, and application position before installation. This sleeve uses a counterclockwise left-hand thread and is specified for center steering locations on the listed vehicles. After installation, the steering system should be aligned to restore proper toe setting and steering wheel position.
Quality Assurance
Dorman RD chassis components are engineered for severe-duty service applications and built for long service life in demanding operating conditions. The RD line is designed for vehicles that need dependable steering hardware in off-road, towing, hauling, and emergency-use environments.
Dorman D1326RD Steering Tie Rod End Adjusting Sleeve - Center
Dorman RD Steering Tie Rod End Adjusting Sleeve D1326RD
Dorman RD D1326RD is a steering tie rod end adjusting sleeve built for severe-duty service on select Jeep applications. It is engineered for vehicles that face off-road use, heavy hauling, towing, and other demanding conditions where steering hardware needs dependable performance.
The RD, or Rugged Duty, product line focuses on chassis components for hard-working vehicles, including emergency and rescue use cases. This D1326RD adjusting sleeve is a standard replacement made from steel with a black finish and coarse, metric threading for specified Jeep steering setups.
Key Features
- Steel construction for durable steering linkage service
- Black finish for corrosion-resistant appearance
- Counterclockwise, left-hand thread direction
- Metric, coarse-thread design with 11/16 in. thread diameter
- Female-to-female end configuration
- Long adjuster design for specified center steering applications
- RD - Rugged Duty line for severe-duty chassis service
Fitment and Application
- Fits 1997-2006 Jeep TJ, center, Long Adjuster; RD - Rugged Duty
- Fits 1997-2006 Jeep Wrangler, center, Long Adjuster; RD - Rugged Duty
- Fits 1991-2001 Jeep Cherokee, center, Long Adjuster; RD - Rugged Duty
- Fits 1993-1998 Jeep Grand Cherokee, center, At Steering Arm; RD - Rugged Duty
- Fits 1991-1992 Jeep Comanche, center, Long Adjuster; RD - Rugged Duty
Detailed Description
Dorman RD D1326RD is a steering tie rod end adjusting sleeve for select Jeep Cherokee, Wrangler, TJ, Grand Cherokee, and Comanche models. It is intended for center steering locations and specified long-adjuster or steering-arm applications, making it a direct service part for worn or failed original equipment on those vehicles. This part cross-references MOOG Chassis Products DS1326S and Delphi TA5647 for the same application.
As part of the Dorman RD Rugged Duty line, this sleeve is aimed at severe-duty chassis service where steering components are exposed to repeated load, vibration, and harsh operating conditions. The steel body, left-hand thread direction, and coarse metric thread profile support precise steering linkage adjustment on the listed Jeep platforms. Part number D1326RD is also a useful reference when sourcing the correct steering tie rod end adjusting sleeve for these applications.
Common Problems This Part Can Address
- Loose or inaccurate toe adjustment in the steering linkage
- Worn or damaged adjusting sleeve threads
- Corrosion on the original steering sleeve
- Steering play caused by a failed OE sleeve
- Service replacement needs on Jeep TJ, Wrangler, Cherokee, Grand Cherokee, or Comanche steering systems
Installation Notes and Tips
Verify thread direction, thread diameter, and application position before installation. This sleeve uses a counterclockwise left-hand thread and is specified for center steering locations on the listed vehicles. After installation, the steering system should be aligned to restore proper toe setting and steering wheel position.
Quality Assurance
Dorman RD chassis components are engineered for severe-duty service applications and built for long service life in demanding operating conditions. The RD line is designed for vehicles that need dependable steering hardware in off-road, towing, hauling, and emergency-use environments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Steering Tie Rod End Adjusting Sleeve D1326RD
Dorman RD D1326RD is a steering tie rod end adjusting sleeve built for severe-duty service on select Jeep applications. It is engineered for vehicles that face off-road use, heavy hauling, towing, and other demanding conditions where steering hardware needs dependable performance.
The RD, or Rugged Duty, product line focuses on chassis components for hard-working vehicles, including emergency and rescue use cases. This D1326RD adjusting sleeve is a standard replacement made from steel with a black finish and coarse, metric threading for specified Jeep steering setups.
Key Features
- Steel construction for durable steering linkage service
- Black finish for corrosion-resistant appearance
- Counterclockwise, left-hand thread direction
- Metric, coarse-thread design with 11/16 in. thread diameter
- Female-to-female end configuration
- Long adjuster design for specified center steering applications
- RD - Rugged Duty line for severe-duty chassis service
Fitment and Application
- Fits 1997-2006 Jeep TJ, center, Long Adjuster; RD - Rugged Duty
- Fits 1997-2006 Jeep Wrangler, center, Long Adjuster; RD - Rugged Duty
- Fits 1991-2001 Jeep Cherokee, center, Long Adjuster; RD - Rugged Duty
- Fits 1993-1998 Jeep Grand Cherokee, center, At Steering Arm; RD - Rugged Duty
- Fits 1991-1992 Jeep Comanche, center, Long Adjuster; RD - Rugged Duty
Detailed Description
Dorman RD D1326RD is a steering tie rod end adjusting sleeve for select Jeep Cherokee, Wrangler, TJ, Grand Cherokee, and Comanche models. It is intended for center steering locations and specified long-adjuster or steering-arm applications, making it a direct service part for worn or failed original equipment on those vehicles. This part cross-references MOOG Chassis Products DS1326S and Delphi TA5647 for the same application.
As part of the Dorman RD Rugged Duty line, this sleeve is aimed at severe-duty chassis service where steering components are exposed to repeated load, vibration, and harsh operating conditions. The steel body, left-hand thread direction, and coarse metric thread profile support precise steering linkage adjustment on the listed Jeep platforms. Part number D1326RD is also a useful reference when sourcing the correct steering tie rod end adjusting sleeve for these applications.
Common Problems This Part Can Address
- Loose or inaccurate toe adjustment in the steering linkage
- Worn or damaged adjusting sleeve threads
- Corrosion on the original steering sleeve
- Steering play caused by a failed OE sleeve
- Service replacement needs on Jeep TJ, Wrangler, Cherokee, Grand Cherokee, or Comanche steering systems
Installation Notes and Tips
Verify thread direction, thread diameter, and application position before installation. This sleeve uses a counterclockwise left-hand thread and is specified for center steering locations on the listed vehicles. After installation, the steering system should be aligned to restore proper toe setting and steering wheel position.
Quality Assurance
Dorman RD chassis components are engineered for severe-duty service applications and built for long service life in demanding operating conditions. The RD line is designed for vehicles that need dependable steering hardware in off-road, towing, hauling, and emergency-use environments.
