DuraGo BD80098-01 Brake Drum - Rear
DuraGo BD80098-01 Rear Brake Drum
The DuraGo Titanium Series brake drum BD80098-01 is built for rear brake service on select Ford, Mercury, and Mazda applications. It combines cast iron construction with a corrosion-resistant titanium gray coating to help protect the exterior and improve appearance on vehicles with open wheel designs.
Manufactured in an ISO certified factory, this rear brake drum is engineered for fit, form, and function. It is a direct replacement for common rear drum applications on the Ford Escape, Mercury Mariner, and Mazda Tribute.
Key Features
- Cast iron construction for dependable brake drum performance
- Rust resistant coating on the exterior for added corrosion defense
- Titanium gray finish for a cleaner look on open wheel designs
- Rear brake drum application
- Nominal drum diameter: 8.99 in. (228.3 mm)
- Maximum brake diameter discard: 9.06 in. (230.1 mm)
- Outside diameter: 10.79 in. (274 mm)
- Brake surface width: 1.96 in. (49.7 mm)
- 5 bolt holes with 4.5 in. bolt circle diameter
- Center hole diameter: 2.83 in. (72 mm)
Detailed Description
DuraGo BD80098-01 is a full cast rear brake drum with a corrosion-resistant coating applied to the exterior and hat area for improved rust protection. The drum is designed around OE-style dimensions, including a 5-lug pattern, 4.5-inch bolt circle, and a nominal 8.99-inch drum diameter, making it a direct-fit replacement for rear drum brake service on 2001-2007 Ford Escape, 2005-2007 Mercury Mariner, and 2001-2006 Mazda Tribute models. This part cross-references OE-style numbers such as 2U2Z1V126BA and 7L8Z1126A for the same application. The BD80098-01 part number is a practical choice when replacing a worn or corroded rear brake drum on these vehicles.
What It Helps Fix
- Rear brake pulsation caused by drum wear or scoring
- Rust buildup on the brake drum exterior and hat area
- Reduced braking consistency from an out-of-spec drum diameter
- Noise from a damaged or uneven drum surface
- Brake service issues on Ford Escape, Mercury Mariner, and Mazda Tribute rear drum setups
Installation Notes
Verify drum diameter, bolt circle, center hole diameter, and brake surface width before installation. Clean the hub and inspect rear brake shoes, hardware, and wheel cylinders for wear before installing the new drum. Confirm rear fitment for your exact vehicle year and trim, especially on 2001-2007 Ford Escape, 2005-2007 Mercury Mariner, and 2001-2006 Mazda Tribute applications. The BD80098-01 is a rear drum replacement and should be matched to the vehicle’s existing drum brake configuration.
Quality Assurance
DuraGo manufactures this Titanium Series brake drum in an ISO certified factory to support consistent fit, form, and function. The corrosion-resistant coating and cast iron construction reflect DuraGo’s experience in brake components and help provide a durable replacement for routine brake service.
Original: $61.07
-65%$61.07
$21.37DuraGo BD80098-01 Brake Drum - Rear
DuraGo BD80098-01 Rear Brake Drum
The DuraGo Titanium Series brake drum BD80098-01 is built for rear brake service on select Ford, Mercury, and Mazda applications. It combines cast iron construction with a corrosion-resistant titanium gray coating to help protect the exterior and improve appearance on vehicles with open wheel designs.
Manufactured in an ISO certified factory, this rear brake drum is engineered for fit, form, and function. It is a direct replacement for common rear drum applications on the Ford Escape, Mercury Mariner, and Mazda Tribute.
Key Features
- Cast iron construction for dependable brake drum performance
- Rust resistant coating on the exterior for added corrosion defense
- Titanium gray finish for a cleaner look on open wheel designs
- Rear brake drum application
- Nominal drum diameter: 8.99 in. (228.3 mm)
- Maximum brake diameter discard: 9.06 in. (230.1 mm)
- Outside diameter: 10.79 in. (274 mm)
- Brake surface width: 1.96 in. (49.7 mm)
- 5 bolt holes with 4.5 in. bolt circle diameter
- Center hole diameter: 2.83 in. (72 mm)
Detailed Description
DuraGo BD80098-01 is a full cast rear brake drum with a corrosion-resistant coating applied to the exterior and hat area for improved rust protection. The drum is designed around OE-style dimensions, including a 5-lug pattern, 4.5-inch bolt circle, and a nominal 8.99-inch drum diameter, making it a direct-fit replacement for rear drum brake service on 2001-2007 Ford Escape, 2005-2007 Mercury Mariner, and 2001-2006 Mazda Tribute models. This part cross-references OE-style numbers such as 2U2Z1V126BA and 7L8Z1126A for the same application. The BD80098-01 part number is a practical choice when replacing a worn or corroded rear brake drum on these vehicles.
What It Helps Fix
- Rear brake pulsation caused by drum wear or scoring
- Rust buildup on the brake drum exterior and hat area
- Reduced braking consistency from an out-of-spec drum diameter
- Noise from a damaged or uneven drum surface
- Brake service issues on Ford Escape, Mercury Mariner, and Mazda Tribute rear drum setups
Installation Notes
Verify drum diameter, bolt circle, center hole diameter, and brake surface width before installation. Clean the hub and inspect rear brake shoes, hardware, and wheel cylinders for wear before installing the new drum. Confirm rear fitment for your exact vehicle year and trim, especially on 2001-2007 Ford Escape, 2005-2007 Mercury Mariner, and 2001-2006 Mazda Tribute applications. The BD80098-01 is a rear drum replacement and should be matched to the vehicle’s existing drum brake configuration.
Quality Assurance
DuraGo manufactures this Titanium Series brake drum in an ISO certified factory to support consistent fit, form, and function. The corrosion-resistant coating and cast iron construction reflect DuraGo’s experience in brake components and help provide a durable replacement for routine brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DuraGo BD80098-01 Rear Brake Drum
The DuraGo Titanium Series brake drum BD80098-01 is built for rear brake service on select Ford, Mercury, and Mazda applications. It combines cast iron construction with a corrosion-resistant titanium gray coating to help protect the exterior and improve appearance on vehicles with open wheel designs.
Manufactured in an ISO certified factory, this rear brake drum is engineered for fit, form, and function. It is a direct replacement for common rear drum applications on the Ford Escape, Mercury Mariner, and Mazda Tribute.
Key Features
- Cast iron construction for dependable brake drum performance
- Rust resistant coating on the exterior for added corrosion defense
- Titanium gray finish for a cleaner look on open wheel designs
- Rear brake drum application
- Nominal drum diameter: 8.99 in. (228.3 mm)
- Maximum brake diameter discard: 9.06 in. (230.1 mm)
- Outside diameter: 10.79 in. (274 mm)
- Brake surface width: 1.96 in. (49.7 mm)
- 5 bolt holes with 4.5 in. bolt circle diameter
- Center hole diameter: 2.83 in. (72 mm)
Detailed Description
DuraGo BD80098-01 is a full cast rear brake drum with a corrosion-resistant coating applied to the exterior and hat area for improved rust protection. The drum is designed around OE-style dimensions, including a 5-lug pattern, 4.5-inch bolt circle, and a nominal 8.99-inch drum diameter, making it a direct-fit replacement for rear drum brake service on 2001-2007 Ford Escape, 2005-2007 Mercury Mariner, and 2001-2006 Mazda Tribute models. This part cross-references OE-style numbers such as 2U2Z1V126BA and 7L8Z1126A for the same application. The BD80098-01 part number is a practical choice when replacing a worn or corroded rear brake drum on these vehicles.
What It Helps Fix
- Rear brake pulsation caused by drum wear or scoring
- Rust buildup on the brake drum exterior and hat area
- Reduced braking consistency from an out-of-spec drum diameter
- Noise from a damaged or uneven drum surface
- Brake service issues on Ford Escape, Mercury Mariner, and Mazda Tribute rear drum setups
Installation Notes
Verify drum diameter, bolt circle, center hole diameter, and brake surface width before installation. Clean the hub and inspect rear brake shoes, hardware, and wheel cylinders for wear before installing the new drum. Confirm rear fitment for your exact vehicle year and trim, especially on 2001-2007 Ford Escape, 2005-2007 Mercury Mariner, and 2001-2006 Mazda Tribute applications. The BD80098-01 is a rear drum replacement and should be matched to the vehicle’s existing drum brake configuration.
Quality Assurance
DuraGo manufactures this Titanium Series brake drum in an ISO certified factory to support consistent fit, form, and function. The corrosion-resistant coating and cast iron construction reflect DuraGo’s experience in brake components and help provide a durable replacement for routine brake service.
