DuraGo BD8974-01 Brake Drum - Rear
DuraGo Brake Drum for Ford Rear Applications
The DuraGo BD8974-01 brake drum is built for rear brake service on select Ford trucks and vans, including Ford F-150, Ford Bronco, and Ford E-150 Econoline applications. It combines a cast iron / steel top construction with a rust-resistant coating to help maintain appearance and service life in exposed wheel locations.
Finished in titanium gray, this DuraGo Titanium Series brake drum is a practical choice for vehicles with open wheel designs where exterior corrosion protection and a clean look matter. The BD8974-01 is manufactured in an ISO certified factory to support fit, form, and function requirements.
Key Features
- Part number BD8974-01
- Rear brake drum for select Ford applications
- Cast iron / steel top construction
- Rust resistant coating on the exterior
- Titanium gray finish for improved appearance on open wheel designs
- Nominal drum diameter: 11.03 in. (280.2 mm)
- Maximum brake diameter discard: 11.12 in. (282.45 mm)
- Outside diameter: 12.78 in. (324.5 mm)
- Brake surface width: 2.7 in. (68.6 mm)
- Bolt circle diameter: 5.5 in. (139.7 mm)
- 5 bolt holes
Detailed Description
The DuraGo BD8974-01 is a composite brake drum engineered for rear brake service on Ford E-150 Econoline, Ford E-150 Econoline Club Wagon, Ford Bronco, and Ford F-150 models listed in the fitment data. Its corrosion-resistant exterior coating helps protect the drum hat and edge, while the titanium gray finish provides a cleaner look on vehicles where the brake drum is visible through the wheel.
This brake drum is manufactured to meet fit, form, and function requirements in an ISO certified facility. It is designed around DuraGo’s experience in brake components and uses dimensions that matter for proper brake service, including a 3.45 in. center hole diameter, 3.7 in. overall height, and 11.03 in. nominal drum diameter. Part number BD8974-01 is also referenced for related Ford rear brake drum applications.
This part cross-references OE-style numbers such as E6TZ1126B and E7TZ1126B for the same application.
What This Brake Drum Helps Address
- Rear brake pulsation caused by worn or out-of-spec drum surfaces
- Corrosion on the drum exterior, hat, and edge
- Brake noise related to uneven drum wear
- Reduced braking consistency from a damaged or heat-worn drum
- Service replacement needs on Ford rear drum brake systems
Installation Notes and Tips
Verify drum diameter, bolt pattern, and center hole dimensions before installation. This brake drum is for rear position use only and is listed for specific Ford applications, including 1986-1996 Ford F-150 rear, 1987-1996 Ford Bronco rear, 1987-1999 Ford E-150 Econoline rear, 1987-1999 Ford E-150 Econoline Club Wagon rear, and 2000 Ford E-150 Econoline and E-150 Econoline Club Wagon rear to 1/19/00.
Inspect brake shoes, wheel cylinders, and related hardware for wear before installing a new drum. Clean the friction surface and confirm the drum is within service limits before returning the vehicle to operation. For fitment searches, this BD8974-01 brake drum is a direct match for select Ford rear drum brake service.
Quality Assurance
DuraGo manufactures this brake drum in an ISO certified factory and builds it to support fit, form, and function requirements. The Titanium Series design adds corrosion resistance to the exterior surface for long-term service in exposed rear brake locations.
Original: $87.20
-65%$87.20
$30.52DuraGo BD8974-01 Brake Drum - Rear
DuraGo Brake Drum for Ford Rear Applications
The DuraGo BD8974-01 brake drum is built for rear brake service on select Ford trucks and vans, including Ford F-150, Ford Bronco, and Ford E-150 Econoline applications. It combines a cast iron / steel top construction with a rust-resistant coating to help maintain appearance and service life in exposed wheel locations.
Finished in titanium gray, this DuraGo Titanium Series brake drum is a practical choice for vehicles with open wheel designs where exterior corrosion protection and a clean look matter. The BD8974-01 is manufactured in an ISO certified factory to support fit, form, and function requirements.
Key Features
- Part number BD8974-01
- Rear brake drum for select Ford applications
- Cast iron / steel top construction
- Rust resistant coating on the exterior
- Titanium gray finish for improved appearance on open wheel designs
- Nominal drum diameter: 11.03 in. (280.2 mm)
- Maximum brake diameter discard: 11.12 in. (282.45 mm)
- Outside diameter: 12.78 in. (324.5 mm)
- Brake surface width: 2.7 in. (68.6 mm)
- Bolt circle diameter: 5.5 in. (139.7 mm)
- 5 bolt holes
Detailed Description
The DuraGo BD8974-01 is a composite brake drum engineered for rear brake service on Ford E-150 Econoline, Ford E-150 Econoline Club Wagon, Ford Bronco, and Ford F-150 models listed in the fitment data. Its corrosion-resistant exterior coating helps protect the drum hat and edge, while the titanium gray finish provides a cleaner look on vehicles where the brake drum is visible through the wheel.
This brake drum is manufactured to meet fit, form, and function requirements in an ISO certified facility. It is designed around DuraGo’s experience in brake components and uses dimensions that matter for proper brake service, including a 3.45 in. center hole diameter, 3.7 in. overall height, and 11.03 in. nominal drum diameter. Part number BD8974-01 is also referenced for related Ford rear brake drum applications.
This part cross-references OE-style numbers such as E6TZ1126B and E7TZ1126B for the same application.
What This Brake Drum Helps Address
- Rear brake pulsation caused by worn or out-of-spec drum surfaces
- Corrosion on the drum exterior, hat, and edge
- Brake noise related to uneven drum wear
- Reduced braking consistency from a damaged or heat-worn drum
- Service replacement needs on Ford rear drum brake systems
Installation Notes and Tips
Verify drum diameter, bolt pattern, and center hole dimensions before installation. This brake drum is for rear position use only and is listed for specific Ford applications, including 1986-1996 Ford F-150 rear, 1987-1996 Ford Bronco rear, 1987-1999 Ford E-150 Econoline rear, 1987-1999 Ford E-150 Econoline Club Wagon rear, and 2000 Ford E-150 Econoline and E-150 Econoline Club Wagon rear to 1/19/00.
Inspect brake shoes, wheel cylinders, and related hardware for wear before installing a new drum. Clean the friction surface and confirm the drum is within service limits before returning the vehicle to operation. For fitment searches, this BD8974-01 brake drum is a direct match for select Ford rear drum brake service.
Quality Assurance
DuraGo manufactures this brake drum in an ISO certified factory and builds it to support fit, form, and function requirements. The Titanium Series design adds corrosion resistance to the exterior surface for long-term service in exposed rear brake locations.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DuraGo Brake Drum for Ford Rear Applications
The DuraGo BD8974-01 brake drum is built for rear brake service on select Ford trucks and vans, including Ford F-150, Ford Bronco, and Ford E-150 Econoline applications. It combines a cast iron / steel top construction with a rust-resistant coating to help maintain appearance and service life in exposed wheel locations.
Finished in titanium gray, this DuraGo Titanium Series brake drum is a practical choice for vehicles with open wheel designs where exterior corrosion protection and a clean look matter. The BD8974-01 is manufactured in an ISO certified factory to support fit, form, and function requirements.
Key Features
- Part number BD8974-01
- Rear brake drum for select Ford applications
- Cast iron / steel top construction
- Rust resistant coating on the exterior
- Titanium gray finish for improved appearance on open wheel designs
- Nominal drum diameter: 11.03 in. (280.2 mm)
- Maximum brake diameter discard: 11.12 in. (282.45 mm)
- Outside diameter: 12.78 in. (324.5 mm)
- Brake surface width: 2.7 in. (68.6 mm)
- Bolt circle diameter: 5.5 in. (139.7 mm)
- 5 bolt holes
Detailed Description
The DuraGo BD8974-01 is a composite brake drum engineered for rear brake service on Ford E-150 Econoline, Ford E-150 Econoline Club Wagon, Ford Bronco, and Ford F-150 models listed in the fitment data. Its corrosion-resistant exterior coating helps protect the drum hat and edge, while the titanium gray finish provides a cleaner look on vehicles where the brake drum is visible through the wheel.
This brake drum is manufactured to meet fit, form, and function requirements in an ISO certified facility. It is designed around DuraGo’s experience in brake components and uses dimensions that matter for proper brake service, including a 3.45 in. center hole diameter, 3.7 in. overall height, and 11.03 in. nominal drum diameter. Part number BD8974-01 is also referenced for related Ford rear brake drum applications.
This part cross-references OE-style numbers such as E6TZ1126B and E7TZ1126B for the same application.
What This Brake Drum Helps Address
- Rear brake pulsation caused by worn or out-of-spec drum surfaces
- Corrosion on the drum exterior, hat, and edge
- Brake noise related to uneven drum wear
- Reduced braking consistency from a damaged or heat-worn drum
- Service replacement needs on Ford rear drum brake systems
Installation Notes and Tips
Verify drum diameter, bolt pattern, and center hole dimensions before installation. This brake drum is for rear position use only and is listed for specific Ford applications, including 1986-1996 Ford F-150 rear, 1987-1996 Ford Bronco rear, 1987-1999 Ford E-150 Econoline rear, 1987-1999 Ford E-150 Econoline Club Wagon rear, and 2000 Ford E-150 Econoline and E-150 Econoline Club Wagon rear to 1/19/00.
Inspect brake shoes, wheel cylinders, and related hardware for wear before installing a new drum. Clean the friction surface and confirm the drum is within service limits before returning the vehicle to operation. For fitment searches, this BD8974-01 brake drum is a direct match for select Ford rear drum brake service.
Quality Assurance
DuraGo manufactures this brake drum in an ISO certified factory and builds it to support fit, form, and function requirements. The Titanium Series design adds corrosion resistance to the exterior surface for long-term service in exposed rear brake locations.
