DuraGo BD8999-01 Brake Drum - Rear
DuraGo BD8999-01 Rear Brake Drum
The DuraGo Titanium Series brake drum is built for rear brake service on select GM trucks and SUVs, including Chevrolet Tahoe, GMC Yukon, and Cadillac Escalade applications. Part number BD8999-01 combines a corrosion-resistant exterior coating with a titanium gray finish that suits open-wheel designs while helping protect the drum from rust.
Key Features
- Cast iron / steel top construction for durable brake service
- Rust-resistant coating on the exterior for added corrosion defense
- Titanium gray finish for a clean appearance behind open wheels
- Outer cooling fins help support heat management
- 6-bolt pattern with 5.5 in. bolt circle diameter
- Nominal drum diameter: 11.15 in.; maximum discard diameter: 11.24 in.
- Brake surface width: 3.27 in.; overall height: 3.84 in.
- ISO-certified manufacturing for fit, form, and function consistency
Detailed Description
DuraGo BD8999-01 is a rear brake drum engineered from DuraGo’s long-term brake component experience and manufactured in an ISO certified factory. The drum uses a composite construction with a cast iron / steel top, a 13.46 in. outside diameter, a 3.1 in. center hole diameter, and a 139.7 mm bolt circle diameter to match the specified rear drum brake applications. The coated hat and edge help resist corrosion in exposed conditions, making this a practical replacement for drivers looking for a rear brake drum for 1995-2000 Chevrolet Tahoe, 1995-2000 GMC Yukon, and 1999-2000 Cadillac Escalade models. This part number, BD8999-01, is also cross-referenced to 15016408 and 15622364 for the same application.
What It Helps Address
- Rear brake drum wear or scoring
- Corrosion on the drum exterior, hat, or edge
- Brake pulsation caused by an out-of-spec drum surface
- Reduced braking consistency from an aged rear drum assembly
- Fitment issues when replacing a 6-lug 11-inch rear drum on select GM vehicles
Installation Notes and Tips
Verify drum diameter, bolt pattern, and brake surface width before installation. This rear drum is listed for rear position use only and is specified for select 6-lug applications with 11-inch rear drum requirements. Confirm the vehicle’s year, make, model, and rear brake configuration against the fitment data before ordering. For best results, inspect rear brake shoes and related hardware for wear and replace any out-of-spec components during service.
Quality Assurance
DuraGo manufactures this Titanium Series brake drum in an ISO certified facility to support fit, form, and function requirements. The corrosion-resistant coating and engineered dimensions are intended to provide consistent replacement performance for the listed Chevrolet Tahoe, GMC Yukon, and Cadillac Escalade rear brake applications.
Original: $113.36
-65%$113.36
$39.68DuraGo BD8999-01 Brake Drum - Rear
DuraGo BD8999-01 Rear Brake Drum
The DuraGo Titanium Series brake drum is built for rear brake service on select GM trucks and SUVs, including Chevrolet Tahoe, GMC Yukon, and Cadillac Escalade applications. Part number BD8999-01 combines a corrosion-resistant exterior coating with a titanium gray finish that suits open-wheel designs while helping protect the drum from rust.
Key Features
- Cast iron / steel top construction for durable brake service
- Rust-resistant coating on the exterior for added corrosion defense
- Titanium gray finish for a clean appearance behind open wheels
- Outer cooling fins help support heat management
- 6-bolt pattern with 5.5 in. bolt circle diameter
- Nominal drum diameter: 11.15 in.; maximum discard diameter: 11.24 in.
- Brake surface width: 3.27 in.; overall height: 3.84 in.
- ISO-certified manufacturing for fit, form, and function consistency
Detailed Description
DuraGo BD8999-01 is a rear brake drum engineered from DuraGo’s long-term brake component experience and manufactured in an ISO certified factory. The drum uses a composite construction with a cast iron / steel top, a 13.46 in. outside diameter, a 3.1 in. center hole diameter, and a 139.7 mm bolt circle diameter to match the specified rear drum brake applications. The coated hat and edge help resist corrosion in exposed conditions, making this a practical replacement for drivers looking for a rear brake drum for 1995-2000 Chevrolet Tahoe, 1995-2000 GMC Yukon, and 1999-2000 Cadillac Escalade models. This part number, BD8999-01, is also cross-referenced to 15016408 and 15622364 for the same application.
What It Helps Address
- Rear brake drum wear or scoring
- Corrosion on the drum exterior, hat, or edge
- Brake pulsation caused by an out-of-spec drum surface
- Reduced braking consistency from an aged rear drum assembly
- Fitment issues when replacing a 6-lug 11-inch rear drum on select GM vehicles
Installation Notes and Tips
Verify drum diameter, bolt pattern, and brake surface width before installation. This rear drum is listed for rear position use only and is specified for select 6-lug applications with 11-inch rear drum requirements. Confirm the vehicle’s year, make, model, and rear brake configuration against the fitment data before ordering. For best results, inspect rear brake shoes and related hardware for wear and replace any out-of-spec components during service.
Quality Assurance
DuraGo manufactures this Titanium Series brake drum in an ISO certified facility to support fit, form, and function requirements. The corrosion-resistant coating and engineered dimensions are intended to provide consistent replacement performance for the listed Chevrolet Tahoe, GMC Yukon, and Cadillac Escalade rear brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DuraGo BD8999-01 Rear Brake Drum
The DuraGo Titanium Series brake drum is built for rear brake service on select GM trucks and SUVs, including Chevrolet Tahoe, GMC Yukon, and Cadillac Escalade applications. Part number BD8999-01 combines a corrosion-resistant exterior coating with a titanium gray finish that suits open-wheel designs while helping protect the drum from rust.
Key Features
- Cast iron / steel top construction for durable brake service
- Rust-resistant coating on the exterior for added corrosion defense
- Titanium gray finish for a clean appearance behind open wheels
- Outer cooling fins help support heat management
- 6-bolt pattern with 5.5 in. bolt circle diameter
- Nominal drum diameter: 11.15 in.; maximum discard diameter: 11.24 in.
- Brake surface width: 3.27 in.; overall height: 3.84 in.
- ISO-certified manufacturing for fit, form, and function consistency
Detailed Description
DuraGo BD8999-01 is a rear brake drum engineered from DuraGo’s long-term brake component experience and manufactured in an ISO certified factory. The drum uses a composite construction with a cast iron / steel top, a 13.46 in. outside diameter, a 3.1 in. center hole diameter, and a 139.7 mm bolt circle diameter to match the specified rear drum brake applications. The coated hat and edge help resist corrosion in exposed conditions, making this a practical replacement for drivers looking for a rear brake drum for 1995-2000 Chevrolet Tahoe, 1995-2000 GMC Yukon, and 1999-2000 Cadillac Escalade models. This part number, BD8999-01, is also cross-referenced to 15016408 and 15622364 for the same application.
What It Helps Address
- Rear brake drum wear or scoring
- Corrosion on the drum exterior, hat, or edge
- Brake pulsation caused by an out-of-spec drum surface
- Reduced braking consistency from an aged rear drum assembly
- Fitment issues when replacing a 6-lug 11-inch rear drum on select GM vehicles
Installation Notes and Tips
Verify drum diameter, bolt pattern, and brake surface width before installation. This rear drum is listed for rear position use only and is specified for select 6-lug applications with 11-inch rear drum requirements. Confirm the vehicle’s year, make, model, and rear brake configuration against the fitment data before ordering. For best results, inspect rear brake shoes and related hardware for wear and replace any out-of-spec components during service.
Quality Assurance
DuraGo manufactures this Titanium Series brake drum in an ISO certified facility to support fit, form, and function requirements. The corrosion-resistant coating and engineered dimensions are intended to provide consistent replacement performance for the listed Chevrolet Tahoe, GMC Yukon, and Cadillac Escalade rear brake applications.
