DuraGo BP1707MS Disc Brake Pad Set - Rear
DuraGo BP1707MS Rear Disc Brake Pad Set
DuraGo BP1707MS is a rear disc brake pad set built for everyday driving safety, consistent pedal feel, and dependable stopping performance. It uses a semi-metallic friction formula with slotted, chamfered pads, plus shims and a mechanical pad wear sensor for service monitoring.
Compatible With rear brake pad replacement needs on 2014-2020 Cadillac Escalade, Chevrolet Tahoe, GMC Yukon, and GMC Yukon XL applications, this BP1707MS set is also listed for 2014-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 rear manual parking brake applications.
Key Features
- Semi-metallic friction material for balanced braking performance
- Slotted design and chamfered edges for controlled contact and noise management
- Pad shims included
- Mechanical pad wear sensor included
- Bonded friction material with iron backing plate
- Outer and inner pad thickness: 0.43 in. (11 mm)
- Overall pad thickness: 0.67 in. (17 mm)
- Pad height: 1.8 in. (45.7 mm); pad width: 5.62 in. (142.7 mm)
Detailed Description
DuraGo BP1707MS is engineered as a regular-grade rear disc brake pad set for vehicles that need reliable friction response across a wide range of driving conditions. The semi-metallic compound is paired with slotted faces and chamfered edges to support stable braking behavior, while the included shims help reduce vibration transfer at the caliper interface. DuraGo manufactures brake friction products in ISO/TS 16949 certified facilities and independently tests formulas for wear and noise squeal protocols. This part number, BP1707MS, is a direct fitment option for rear brake service on Cadillac Escalade and Escalade ESV, Chevrolet Tahoe, GMC Yukon, and GMC Yukon XL from 2015-2020, plus Chevrolet Silverado 1500, Silverado 1500 LD, GMC Sierra 1500, and Sierra 1500 Limited rear manual parking brake applications for 2019 and rear brake replacement coverage for 2014-2018 Silverado 1500 and Sierra 1500.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake squeal during normal rear brake operation
- Uneven or worn rear brake pad friction surfaces
- Reduced braking consistency from aged pads
- Vibration or noise at the caliper/pad interface
- Service intervals that require rear pad replacement and wear-sensor monitoring
Installation Notes and Tips
Verify rear axle fitment, caliper configuration, and parking brake setup before installation. Clean the caliper bracket and pad contact points, inspect rotors for scoring or thickness variation, and confirm the mechanical wear sensor is routed correctly. Because mounting hardware and abutment clips are not included, reuse only serviceable components or replace them separately as needed. After installation, perform a controlled brake-in procedure to help seat the pads evenly.
Quality Assurance
DuraGo brake pads are produced in ISO/TS 16949 certified facilities and are independently tested for wear and noise squeal performance. BP1707MS is built with bonded semi-metallic friction material, iron backing plates, and pad shims to support consistent rear brake service on applications such as the Cadillac Escalade, Chevrolet Tahoe, and GMC Yukon.
DuraGo BP1707MS Disc Brake Pad Set - Rear
DuraGo BP1707MS Rear Disc Brake Pad Set
DuraGo BP1707MS is a rear disc brake pad set built for everyday driving safety, consistent pedal feel, and dependable stopping performance. It uses a semi-metallic friction formula with slotted, chamfered pads, plus shims and a mechanical pad wear sensor for service monitoring.
Compatible With rear brake pad replacement needs on 2014-2020 Cadillac Escalade, Chevrolet Tahoe, GMC Yukon, and GMC Yukon XL applications, this BP1707MS set is also listed for 2014-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 rear manual parking brake applications.
Key Features
- Semi-metallic friction material for balanced braking performance
- Slotted design and chamfered edges for controlled contact and noise management
- Pad shims included
- Mechanical pad wear sensor included
- Bonded friction material with iron backing plate
- Outer and inner pad thickness: 0.43 in. (11 mm)
- Overall pad thickness: 0.67 in. (17 mm)
- Pad height: 1.8 in. (45.7 mm); pad width: 5.62 in. (142.7 mm)
Detailed Description
DuraGo BP1707MS is engineered as a regular-grade rear disc brake pad set for vehicles that need reliable friction response across a wide range of driving conditions. The semi-metallic compound is paired with slotted faces and chamfered edges to support stable braking behavior, while the included shims help reduce vibration transfer at the caliper interface. DuraGo manufactures brake friction products in ISO/TS 16949 certified facilities and independently tests formulas for wear and noise squeal protocols. This part number, BP1707MS, is a direct fitment option for rear brake service on Cadillac Escalade and Escalade ESV, Chevrolet Tahoe, GMC Yukon, and GMC Yukon XL from 2015-2020, plus Chevrolet Silverado 1500, Silverado 1500 LD, GMC Sierra 1500, and Sierra 1500 Limited rear manual parking brake applications for 2019 and rear brake replacement coverage for 2014-2018 Silverado 1500 and Sierra 1500.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake squeal during normal rear brake operation
- Uneven or worn rear brake pad friction surfaces
- Reduced braking consistency from aged pads
- Vibration or noise at the caliper/pad interface
- Service intervals that require rear pad replacement and wear-sensor monitoring
Installation Notes and Tips
Verify rear axle fitment, caliper configuration, and parking brake setup before installation. Clean the caliper bracket and pad contact points, inspect rotors for scoring or thickness variation, and confirm the mechanical wear sensor is routed correctly. Because mounting hardware and abutment clips are not included, reuse only serviceable components or replace them separately as needed. After installation, perform a controlled brake-in procedure to help seat the pads evenly.
Quality Assurance
DuraGo brake pads are produced in ISO/TS 16949 certified facilities and are independently tested for wear and noise squeal performance. BP1707MS is built with bonded semi-metallic friction material, iron backing plates, and pad shims to support consistent rear brake service on applications such as the Cadillac Escalade, Chevrolet Tahoe, and GMC Yukon.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DuraGo BP1707MS Rear Disc Brake Pad Set
DuraGo BP1707MS is a rear disc brake pad set built for everyday driving safety, consistent pedal feel, and dependable stopping performance. It uses a semi-metallic friction formula with slotted, chamfered pads, plus shims and a mechanical pad wear sensor for service monitoring.
Compatible With rear brake pad replacement needs on 2014-2020 Cadillac Escalade, Chevrolet Tahoe, GMC Yukon, and GMC Yukon XL applications, this BP1707MS set is also listed for 2014-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 rear manual parking brake applications.
Key Features
- Semi-metallic friction material for balanced braking performance
- Slotted design and chamfered edges for controlled contact and noise management
- Pad shims included
- Mechanical pad wear sensor included
- Bonded friction material with iron backing plate
- Outer and inner pad thickness: 0.43 in. (11 mm)
- Overall pad thickness: 0.67 in. (17 mm)
- Pad height: 1.8 in. (45.7 mm); pad width: 5.62 in. (142.7 mm)
Detailed Description
DuraGo BP1707MS is engineered as a regular-grade rear disc brake pad set for vehicles that need reliable friction response across a wide range of driving conditions. The semi-metallic compound is paired with slotted faces and chamfered edges to support stable braking behavior, while the included shims help reduce vibration transfer at the caliper interface. DuraGo manufactures brake friction products in ISO/TS 16949 certified facilities and independently tests formulas for wear and noise squeal protocols. This part number, BP1707MS, is a direct fitment option for rear brake service on Cadillac Escalade and Escalade ESV, Chevrolet Tahoe, GMC Yukon, and GMC Yukon XL from 2015-2020, plus Chevrolet Silverado 1500, Silverado 1500 LD, GMC Sierra 1500, and Sierra 1500 Limited rear manual parking brake applications for 2019 and rear brake replacement coverage for 2014-2018 Silverado 1500 and Sierra 1500.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake squeal during normal rear brake operation
- Uneven or worn rear brake pad friction surfaces
- Reduced braking consistency from aged pads
- Vibration or noise at the caliper/pad interface
- Service intervals that require rear pad replacement and wear-sensor monitoring
Installation Notes and Tips
Verify rear axle fitment, caliper configuration, and parking brake setup before installation. Clean the caliper bracket and pad contact points, inspect rotors for scoring or thickness variation, and confirm the mechanical wear sensor is routed correctly. Because mounting hardware and abutment clips are not included, reuse only serviceable components or replace them separately as needed. After installation, perform a controlled brake-in procedure to help seat the pads evenly.
Quality Assurance
DuraGo brake pads are produced in ISO/TS 16949 certified facilities and are independently tested for wear and noise squeal performance. BP1707MS is built with bonded semi-metallic friction material, iron backing plates, and pad shims to support consistent rear brake service on applications such as the Cadillac Escalade, Chevrolet Tahoe, and GMC Yukon.
