DuraGo BP1729C Disc Brake Pad Set - Rear
DuraGo BP1729C Rear Brake Pads
DuraGo BP1729C is a rear disc brake pad set built for Mazda 3 and Mazda 3 Sport applications with confirmed fitment for 2014-2018 models. This ceramic brake pad set is engineered for everyday driving stability, with slotted faces, chamfered edges, pad shims, and a mechanical pad wear sensor included for direct replacement service.
Key Features
- Ceramic friction material for consistent braking feel
- Rear disc brake pad set for Mazda 3 and Mazda 3 Sport applications
- Slotted design and chamfered edges for controlled pad contact
- Pad shims included to help reduce brake noise
- Mechanical pad wear sensor included
- Bonded friction material on an iron backing plate
- Regular grade construction for daily driving use
- Outer and inner pad dimensions: 4 in. width, 1.78 in. height, 0.54 in. overall thickness
Detailed Description
DuraGo BP1729C is a rear brake pad set designed for drivers who need a direct-fit replacement for select Mazda rear brake applications. The ceramic friction formula is paired with slotted surfaces, chamfered edges, and bonded construction to support smooth pedal response and dependable vehicle control across a range of driving conditions. This part number, BP1729C, is built for 2014-2018 Mazda 3 rear brake service, including 2014-2016 Mazda 3 Sport rear applications built in Japan and 2017-2018 Mazda 3 Sport rear applications built in Japan with a manual parking brake. It also fits 2014-2018 Mazda 3 rear applications except Mexico-built vehicles.
DuraGo develops brake friction products in ISO/TS 16949 certified facilities and independently tests formulas for wear and noise squeal protocols. That focus on fit and function makes BP1729C a practical choice when replacing worn rear pads on Mazda 3 and Mazda 3 Sport models. If you are searching for Mazda 3 rear brake pads, Mazda 3 Sport rear ceramic pads, or DuraGo BP1729C replacement pads, this part matches those fitment needs directly.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Squealing or noisy rear brakes
- Reduced braking response from worn friction material
- Uneven pad wear on rear disc brakes
- Brake vibration caused by worn pad surfaces
- Loss of consistent pedal feel during daily driving
Installation Notes and Tips
Confirm rear axle fitment before ordering, especially for Mazda 3 Sport models with Japan-built and manual parking brake requirements. Inspect rotors, caliper hardware, and wear sensors during service, and replace any damaged components before installing the new pads. Because mounting hardware and abutment clips are not included, reuse only serviceable existing hardware or source the correct related components separately.
Quality Assurance
DuraGo brake pads are manufactured in state-of-the-art ISO/TS 16949 certified facilities and tested for wear and noise performance. BP1729C is built to meet the demands of everyday driving while supporting reliable rear brake service on compatible Mazda 3 and Mazda 3 Sport applications.
DuraGo BP1729C Disc Brake Pad Set - Rear
DuraGo BP1729C Rear Brake Pads
DuraGo BP1729C is a rear disc brake pad set built for Mazda 3 and Mazda 3 Sport applications with confirmed fitment for 2014-2018 models. This ceramic brake pad set is engineered for everyday driving stability, with slotted faces, chamfered edges, pad shims, and a mechanical pad wear sensor included for direct replacement service.
Key Features
- Ceramic friction material for consistent braking feel
- Rear disc brake pad set for Mazda 3 and Mazda 3 Sport applications
- Slotted design and chamfered edges for controlled pad contact
- Pad shims included to help reduce brake noise
- Mechanical pad wear sensor included
- Bonded friction material on an iron backing plate
- Regular grade construction for daily driving use
- Outer and inner pad dimensions: 4 in. width, 1.78 in. height, 0.54 in. overall thickness
Detailed Description
DuraGo BP1729C is a rear brake pad set designed for drivers who need a direct-fit replacement for select Mazda rear brake applications. The ceramic friction formula is paired with slotted surfaces, chamfered edges, and bonded construction to support smooth pedal response and dependable vehicle control across a range of driving conditions. This part number, BP1729C, is built for 2014-2018 Mazda 3 rear brake service, including 2014-2016 Mazda 3 Sport rear applications built in Japan and 2017-2018 Mazda 3 Sport rear applications built in Japan with a manual parking brake. It also fits 2014-2018 Mazda 3 rear applications except Mexico-built vehicles.
DuraGo develops brake friction products in ISO/TS 16949 certified facilities and independently tests formulas for wear and noise squeal protocols. That focus on fit and function makes BP1729C a practical choice when replacing worn rear pads on Mazda 3 and Mazda 3 Sport models. If you are searching for Mazda 3 rear brake pads, Mazda 3 Sport rear ceramic pads, or DuraGo BP1729C replacement pads, this part matches those fitment needs directly.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Squealing or noisy rear brakes
- Reduced braking response from worn friction material
- Uneven pad wear on rear disc brakes
- Brake vibration caused by worn pad surfaces
- Loss of consistent pedal feel during daily driving
Installation Notes and Tips
Confirm rear axle fitment before ordering, especially for Mazda 3 Sport models with Japan-built and manual parking brake requirements. Inspect rotors, caliper hardware, and wear sensors during service, and replace any damaged components before installing the new pads. Because mounting hardware and abutment clips are not included, reuse only serviceable existing hardware or source the correct related components separately.
Quality Assurance
DuraGo brake pads are manufactured in state-of-the-art ISO/TS 16949 certified facilities and tested for wear and noise performance. BP1729C is built to meet the demands of everyday driving while supporting reliable rear brake service on compatible Mazda 3 and Mazda 3 Sport applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DuraGo BP1729C Rear Brake Pads
DuraGo BP1729C is a rear disc brake pad set built for Mazda 3 and Mazda 3 Sport applications with confirmed fitment for 2014-2018 models. This ceramic brake pad set is engineered for everyday driving stability, with slotted faces, chamfered edges, pad shims, and a mechanical pad wear sensor included for direct replacement service.
Key Features
- Ceramic friction material for consistent braking feel
- Rear disc brake pad set for Mazda 3 and Mazda 3 Sport applications
- Slotted design and chamfered edges for controlled pad contact
- Pad shims included to help reduce brake noise
- Mechanical pad wear sensor included
- Bonded friction material on an iron backing plate
- Regular grade construction for daily driving use
- Outer and inner pad dimensions: 4 in. width, 1.78 in. height, 0.54 in. overall thickness
Detailed Description
DuraGo BP1729C is a rear brake pad set designed for drivers who need a direct-fit replacement for select Mazda rear brake applications. The ceramic friction formula is paired with slotted surfaces, chamfered edges, and bonded construction to support smooth pedal response and dependable vehicle control across a range of driving conditions. This part number, BP1729C, is built for 2014-2018 Mazda 3 rear brake service, including 2014-2016 Mazda 3 Sport rear applications built in Japan and 2017-2018 Mazda 3 Sport rear applications built in Japan with a manual parking brake. It also fits 2014-2018 Mazda 3 rear applications except Mexico-built vehicles.
DuraGo develops brake friction products in ISO/TS 16949 certified facilities and independently tests formulas for wear and noise squeal protocols. That focus on fit and function makes BP1729C a practical choice when replacing worn rear pads on Mazda 3 and Mazda 3 Sport models. If you are searching for Mazda 3 rear brake pads, Mazda 3 Sport rear ceramic pads, or DuraGo BP1729C replacement pads, this part matches those fitment needs directly.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Squealing or noisy rear brakes
- Reduced braking response from worn friction material
- Uneven pad wear on rear disc brakes
- Brake vibration caused by worn pad surfaces
- Loss of consistent pedal feel during daily driving
Installation Notes and Tips
Confirm rear axle fitment before ordering, especially for Mazda 3 Sport models with Japan-built and manual parking brake requirements. Inspect rotors, caliper hardware, and wear sensors during service, and replace any damaged components before installing the new pads. Because mounting hardware and abutment clips are not included, reuse only serviceable existing hardware or source the correct related components separately.
Quality Assurance
DuraGo brake pads are manufactured in state-of-the-art ISO/TS 16949 certified facilities and tested for wear and noise performance. BP1729C is built to meet the demands of everyday driving while supporting reliable rear brake service on compatible Mazda 3 and Mazda 3 Sport applications.
