DuraGo BR5319 Disc Brake Rotor - Front

DuraGo BR5319 Front Brake Rotor

The DuraGo BR5319 is a vented front disc brake rotor built from cast iron for select Dodge and Plymouth heavy-duty applications. It is engineered for fit, form, and function in line with DuraGo’s ISO-certified manufacturing standards.

• Cast iron, full-cast construction
• Vented rotor design for front brake applications
• Non-directional brake surface
• Outside diameter: 12.82 in. (325.6 mm)
• Nominal thickness: 1.19 in. (30.2 mm)
• Discard thickness: 1.13 in. (28.6 mm)
• 8-bolt mounting pattern with 6.5 in. bolt circle diameter
• Center hole diameter: 4.84 in. (123 mm)
• Conventional rotor design; no cross-drilling or slots

Fitment and Application Details

Compatible with select Dodge B350, B3500, B300, D250, D200, D300, D350, and Plymouth PB350 front brake applications from 1975-1997. This part number, BR5319, is commonly searched for Dodge D250 front brake rotor replacement and Dodge B350 front disc brake rotor service on heavy-duty vans and trucks.

• Fits 1995-1997 Dodge B3500, front, 3800 lb FA or 4000 lb FA
• Fits 1994 Dodge B350, front, w/ 3800, 4000 lb. FA
• Fits 1982-1993 Dodge B350, front, 2-1/2 & 3 Inch Rear Shoe; w/ 3800 or 4000 lb. FA
• Fits 1991-1993 Dodge B350, front, Sportsman w/ 3800 or 4000 lb. FA
• Fits 1986-1987 Dodge D350, front, 2-1/2 Inch Rear Shoe; w/ 4000 lb. FA
• Fits 1982-1985 Dodge D250, front, 3800 or 4000lb. FA
• Fits 1984-1985 Dodge D350, front, 2-1/2 & 3 Inch Rear Shoe; 4000 lb. FA
• Fits 1982-1983 Dodge D350, front, 2-1/2 & 3 Inch Rear Shoe; SRW w/ 3800 or 4000 lb. FA
• Fits 1982-1983 Plymouth PB350, front, w/ 2 & 3 Inch Rear Shoe; w/ 3800, 4000 lb. FA
• Fits 1981 Dodge B350, front, 2 & 2-1/2 Inch Rear Shoe; SRW w/ 3800 or 4000 lb. FA
• Fits 1981 Dodge D250, front, 2 & 2-1/2 Inch Rear Shoe; 3800 or 4000lb. FA
• Fits 1981 Dodge D350, front, SRW
• Fits 1981 Plymouth PB350, front, 12 1/8 x w/ 2 Inch Rear Shoes & 12 x 2 1/2 Inch Rear Shoe; SRW w/ 3800, 4000 lb. FA
• Fits 1979-1980 Dodge B300, front, 2 & 2-1/2 Inch Rear Shoe; SRW w/ 3800 or 4000 lb. FA
• Fits 1979-1980 Dodge D200, front, 2 Inch Rear Shoe; 3800 or 4000lb. FA
• Fits 1980 Dodge D300, front, SRW
• Fits 1979 Dodge D200, front, 2-1/2 Inch Rear Shoe; 3800 or 4000lb. FA
• Fits 1978-1979 Dodge D300, front, 2 & 2-1/2 Inch Rear Shoe; SRW
• Fits 1978 Dodge B300, front, 2 & 2-1/2 Inch Rear Shoe; w/ 3800 or 4000 lb. FA
• Fits 1978 Dodge D200, front, 2 & 2-1/2 Inch Rear Shoe; w/ 4000 lb. FA
• Fits 1975-1977 Dodge B300, front, 2-1/2 & 3 Inch Rear Shoe; SRW w/ 3800 lb. FA
• Fits 1975-1977 Dodge D200, front, 2 & 2-1/2 Inch Rear Shoe; SRW Exc. 3300 lb. FA
• Fits 1975-1977 Dodge D300, front, SRW w/ 3800 lb. FA

What This Rotor Helps Address

• Brake pulsation from worn or uneven rotor surfaces
• Reduced stopping consistency on front axle brake service
• Rotor wear that has reached discard thickness
• Noise or vibration related to rotor surface condition
• Service needs on heavy-duty Dodge and Plymouth front brake systems

Installation Notes

Verify rotor dimensions, bolt pattern, and front axle rating before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and bearings during brake service. Because this rotor uses a non-directional surface and conventional vented construction, it is straightforward to install on the listed front applications when the vehicle configuration matches the fitment notes.

Quality Assurance

DuraGo manufactures brake drums and rotors through ISO-certified factories and focuses on catalog accuracy and application coverage for professional repair work. The BR5319 is built to meet fit, form, and function requirements for the listed Dodge and Plymouth applications. This part cross-references DENSO Auto Parts (5319) and Carlson (7022) for the same application.