DuraGo BR901566 Disc Brake Rotor - Front
DuraGo BR901566 Disc Brake Rotor Overview
The DuraGo BR901566 is a vented front disc brake rotor built from cast iron with a full cast construction for consistent braking performance. It is a conventional, non-directional rotor with a 12.2-inch outside diameter, 6-bolt mounting pattern, and M12 x 1.75 bolt size for applications that match these specifications.
Built by DuraGo, a long-established aftermarket brake supplier, this rotor reflects the brand’s focus on fit, form, and function for professional repair work. If you are searching for a DuraGo BR901566 brake rotor or a direct replacement rotor for select vehicle applications, this part number is a practical OE-style service option.
Key Features
- Cast iron rotor with full cast construction
- Vented disc brake rotor design for heat management
- Non-directional brake surface for straightforward service installation
- 12.2 in. (310 mm) outside diameter
- 6 mounting bolt holes with 140 mm bolt circle diameter
- Center hole diameter: 114 mm
- Nominal thickness: 1.57 in. (40 mm)
- Discard thickness: 1.5 in. (38 mm)
- Conventional, drum-in-hat type: No
- Cross-drilled: No; Slotted: No
Detailed Description
The DuraGo BR901566 rotor is engineered as a conventional vented brake rotor for vehicles that require a 310 mm rotor with a 6-lug pattern and a 114 mm center bore. Its cast iron construction supports stable braking characteristics, while the non-directional surface simplifies rotor service and replacement. This part number is commonly searched by buyers looking for a DuraGo BR901566 front brake rotor, a vented cast iron rotor, or a replacement rotor for select 6-bolt applications.
This part cross-references Monroe Shocks & Struts (e.g., MK326334) for the same application. For fitment-focused searches, use terms such as DuraGo BR901566 rotor, 310 mm vented brake rotor, and 6-lug front disc brake rotor for select make/model applications.
What This Rotor Helps Address
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Rotor replacement needs during brake pad service
- Noise or vibration linked to rotor wear or scoring
- Service requirements for vehicles using a 310 mm vented front rotor
Installation Notes and Tips
Verify rotor diameter, center bore, bolt circle diameter, and bolt size before installation. Confirm vehicle-specific fitment for the exact make and model, including front axle application where required. Clean the hub mounting surface before installing the rotor to help prevent runout-related brake vibration. Always inspect pads, calipers, and hardware condition during rotor replacement, and follow the vehicle manufacturer’s torque specifications.
Compatible vehicle search terms for this part include select 6-lug brake rotor applications, DuraGo BR901566 replacement rotor, and vented front disc brake rotor for make/model-specific service. Fits should be confirmed against the vehicle’s brake specifications before ordering.
Quality Assurance
DuraGo manufactures brake drums and rotors through ISO-certified factories and builds its aftermarket catalog around fit, form, and function requirements. The brand’s long history in brake components supports consistent cataloging and application coverage for professional repair use.
DuraGo BR901566 Disc Brake Rotor - Front
DuraGo BR901566 Disc Brake Rotor Overview
The DuraGo BR901566 is a vented front disc brake rotor built from cast iron with a full cast construction for consistent braking performance. It is a conventional, non-directional rotor with a 12.2-inch outside diameter, 6-bolt mounting pattern, and M12 x 1.75 bolt size for applications that match these specifications.
Built by DuraGo, a long-established aftermarket brake supplier, this rotor reflects the brand’s focus on fit, form, and function for professional repair work. If you are searching for a DuraGo BR901566 brake rotor or a direct replacement rotor for select vehicle applications, this part number is a practical OE-style service option.
Key Features
- Cast iron rotor with full cast construction
- Vented disc brake rotor design for heat management
- Non-directional brake surface for straightforward service installation
- 12.2 in. (310 mm) outside diameter
- 6 mounting bolt holes with 140 mm bolt circle diameter
- Center hole diameter: 114 mm
- Nominal thickness: 1.57 in. (40 mm)
- Discard thickness: 1.5 in. (38 mm)
- Conventional, drum-in-hat type: No
- Cross-drilled: No; Slotted: No
Detailed Description
The DuraGo BR901566 rotor is engineered as a conventional vented brake rotor for vehicles that require a 310 mm rotor with a 6-lug pattern and a 114 mm center bore. Its cast iron construction supports stable braking characteristics, while the non-directional surface simplifies rotor service and replacement. This part number is commonly searched by buyers looking for a DuraGo BR901566 front brake rotor, a vented cast iron rotor, or a replacement rotor for select 6-bolt applications.
This part cross-references Monroe Shocks & Struts (e.g., MK326334) for the same application. For fitment-focused searches, use terms such as DuraGo BR901566 rotor, 310 mm vented brake rotor, and 6-lug front disc brake rotor for select make/model applications.
What This Rotor Helps Address
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Rotor replacement needs during brake pad service
- Noise or vibration linked to rotor wear or scoring
- Service requirements for vehicles using a 310 mm vented front rotor
Installation Notes and Tips
Verify rotor diameter, center bore, bolt circle diameter, and bolt size before installation. Confirm vehicle-specific fitment for the exact make and model, including front axle application where required. Clean the hub mounting surface before installing the rotor to help prevent runout-related brake vibration. Always inspect pads, calipers, and hardware condition during rotor replacement, and follow the vehicle manufacturer’s torque specifications.
Compatible vehicle search terms for this part include select 6-lug brake rotor applications, DuraGo BR901566 replacement rotor, and vented front disc brake rotor for make/model-specific service. Fits should be confirmed against the vehicle’s brake specifications before ordering.
Quality Assurance
DuraGo manufactures brake drums and rotors through ISO-certified factories and builds its aftermarket catalog around fit, form, and function requirements. The brand’s long history in brake components supports consistent cataloging and application coverage for professional repair use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DuraGo BR901566 Disc Brake Rotor Overview
The DuraGo BR901566 is a vented front disc brake rotor built from cast iron with a full cast construction for consistent braking performance. It is a conventional, non-directional rotor with a 12.2-inch outside diameter, 6-bolt mounting pattern, and M12 x 1.75 bolt size for applications that match these specifications.
Built by DuraGo, a long-established aftermarket brake supplier, this rotor reflects the brand’s focus on fit, form, and function for professional repair work. If you are searching for a DuraGo BR901566 brake rotor or a direct replacement rotor for select vehicle applications, this part number is a practical OE-style service option.
Key Features
- Cast iron rotor with full cast construction
- Vented disc brake rotor design for heat management
- Non-directional brake surface for straightforward service installation
- 12.2 in. (310 mm) outside diameter
- 6 mounting bolt holes with 140 mm bolt circle diameter
- Center hole diameter: 114 mm
- Nominal thickness: 1.57 in. (40 mm)
- Discard thickness: 1.5 in. (38 mm)
- Conventional, drum-in-hat type: No
- Cross-drilled: No; Slotted: No
Detailed Description
The DuraGo BR901566 rotor is engineered as a conventional vented brake rotor for vehicles that require a 310 mm rotor with a 6-lug pattern and a 114 mm center bore. Its cast iron construction supports stable braking characteristics, while the non-directional surface simplifies rotor service and replacement. This part number is commonly searched by buyers looking for a DuraGo BR901566 front brake rotor, a vented cast iron rotor, or a replacement rotor for select 6-bolt applications.
This part cross-references Monroe Shocks & Struts (e.g., MK326334) for the same application. For fitment-focused searches, use terms such as DuraGo BR901566 rotor, 310 mm vented brake rotor, and 6-lug front disc brake rotor for select make/model applications.
What This Rotor Helps Address
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from heat-affected rotor surfaces
- Rotor replacement needs during brake pad service
- Noise or vibration linked to rotor wear or scoring
- Service requirements for vehicles using a 310 mm vented front rotor
Installation Notes and Tips
Verify rotor diameter, center bore, bolt circle diameter, and bolt size before installation. Confirm vehicle-specific fitment for the exact make and model, including front axle application where required. Clean the hub mounting surface before installing the rotor to help prevent runout-related brake vibration. Always inspect pads, calipers, and hardware condition during rotor replacement, and follow the vehicle manufacturer’s torque specifications.
Compatible vehicle search terms for this part include select 6-lug brake rotor applications, DuraGo BR901566 replacement rotor, and vented front disc brake rotor for make/model-specific service. Fits should be confirmed against the vehicle’s brake specifications before ordering.
Quality Assurance
DuraGo manufactures brake drums and rotors through ISO-certified factories and builds its aftermarket catalog around fit, form, and function requirements. The brand’s long history in brake components supports consistent cataloging and application coverage for professional repair use.
