Dynamite Friction 4000-1008-00 Disc Brake Pad Set - Rear
DFC 4000 HybriDynamic Rear Brake Pads
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This rear disc brake pad set is a direct fit for select Mazda RX-8 models and is tuned for consistent stopping performance with a value-focused hybrid friction material.
The DFC 4000 HybriDynamic Brake Pads line is positioned for daily driving applications where predictable brake response matters. For the 2004-2011 Mazda RX-8 rear brake service, part number 4000-1008-00 provides a practical balance of control, comfort, and clean operation.
- Hybrid friction material for balanced braking performance
- Low dust characteristics for cleaner wheel maintenance
- Low noise design for quieter everyday driving
- Prepared for a mechanical pad wear sensor
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 43 mm height, 105.4 mm width, 13.3 mm thickness
- Rear disc brake pad set for select Mazda RX-8 applications
Detailed Product Information
Part number 4000-1008-00 is a rear disc brake pad set for the 2004-2011 Mazda RX-8, rear. The hybrid friction compound is formulated to deliver consistent pedal feel and dependable brake response without adding unnecessary noise or dust. That makes it a strong choice for routine brake service on the Mazda RX-8 when you want stable braking behavior and straightforward maintenance.
Because the pads are prepared for a mechanical wear sensor, they support vehicles equipped for that setup while the sensor itself is not included. Mounting hardware is also not included, so existing hardware should be inspected and replaced separately if worn. The pad shape, height, width, and thickness are specified for the rear axle application, helping confirm the correct fit before installation.
Common Problems This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise during light or moderate pedal application
- Excess brake dust buildup on rear wheels
- Uneven or inconsistent pedal feel from aged pad material
- Rear brake service needs on a 2004-2011 Mazda RX-8
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, and inspect the wear sensor setup if your vehicle uses one. Since mounting hardware is not included, reuse only serviceable hardware or replace it as needed during brake service. Part number 4000-1008-00 is specified for the rear position on the Mazda RX-8, so confirm the application before ordering.
Quality Assurance
Dynamite Friction’s DFC 4000 HybriDynamic line is built around a hybrid friction formulation aimed at consistent braking performance, low dust, and low noise for daily driving use. This product is identified for the 2004-2011 Mazda RX-8, rear, and is engineered to meet the demands of routine street braking service.
Original: $35.54
-65%$35.54
$12.44Dynamite Friction 4000-1008-00 Disc Brake Pad Set - Rear
DFC 4000 HybriDynamic Rear Brake Pads
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This rear disc brake pad set is a direct fit for select Mazda RX-8 models and is tuned for consistent stopping performance with a value-focused hybrid friction material.
The DFC 4000 HybriDynamic Brake Pads line is positioned for daily driving applications where predictable brake response matters. For the 2004-2011 Mazda RX-8 rear brake service, part number 4000-1008-00 provides a practical balance of control, comfort, and clean operation.
- Hybrid friction material for balanced braking performance
- Low dust characteristics for cleaner wheel maintenance
- Low noise design for quieter everyday driving
- Prepared for a mechanical pad wear sensor
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 43 mm height, 105.4 mm width, 13.3 mm thickness
- Rear disc brake pad set for select Mazda RX-8 applications
Detailed Product Information
Part number 4000-1008-00 is a rear disc brake pad set for the 2004-2011 Mazda RX-8, rear. The hybrid friction compound is formulated to deliver consistent pedal feel and dependable brake response without adding unnecessary noise or dust. That makes it a strong choice for routine brake service on the Mazda RX-8 when you want stable braking behavior and straightforward maintenance.
Because the pads are prepared for a mechanical wear sensor, they support vehicles equipped for that setup while the sensor itself is not included. Mounting hardware is also not included, so existing hardware should be inspected and replaced separately if worn. The pad shape, height, width, and thickness are specified for the rear axle application, helping confirm the correct fit before installation.
Common Problems This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise during light or moderate pedal application
- Excess brake dust buildup on rear wheels
- Uneven or inconsistent pedal feel from aged pad material
- Rear brake service needs on a 2004-2011 Mazda RX-8
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, and inspect the wear sensor setup if your vehicle uses one. Since mounting hardware is not included, reuse only serviceable hardware or replace it as needed during brake service. Part number 4000-1008-00 is specified for the rear position on the Mazda RX-8, so confirm the application before ordering.
Quality Assurance
Dynamite Friction’s DFC 4000 HybriDynamic line is built around a hybrid friction formulation aimed at consistent braking performance, low dust, and low noise for daily driving use. This product is identified for the 2004-2011 Mazda RX-8, rear, and is engineered to meet the demands of routine street braking service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DFC 4000 HybriDynamic Rear Brake Pads
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This rear disc brake pad set is a direct fit for select Mazda RX-8 models and is tuned for consistent stopping performance with a value-focused hybrid friction material.
The DFC 4000 HybriDynamic Brake Pads line is positioned for daily driving applications where predictable brake response matters. For the 2004-2011 Mazda RX-8 rear brake service, part number 4000-1008-00 provides a practical balance of control, comfort, and clean operation.
- Hybrid friction material for balanced braking performance
- Low dust characteristics for cleaner wheel maintenance
- Low noise design for quieter everyday driving
- Prepared for a mechanical pad wear sensor
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 43 mm height, 105.4 mm width, 13.3 mm thickness
- Rear disc brake pad set for select Mazda RX-8 applications
Detailed Product Information
Part number 4000-1008-00 is a rear disc brake pad set for the 2004-2011 Mazda RX-8, rear. The hybrid friction compound is formulated to deliver consistent pedal feel and dependable brake response without adding unnecessary noise or dust. That makes it a strong choice for routine brake service on the Mazda RX-8 when you want stable braking behavior and straightforward maintenance.
Because the pads are prepared for a mechanical wear sensor, they support vehicles equipped for that setup while the sensor itself is not included. Mounting hardware is also not included, so existing hardware should be inspected and replaced separately if worn. The pad shape, height, width, and thickness are specified for the rear axle application, helping confirm the correct fit before installation.
Common Problems This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise during light or moderate pedal application
- Excess brake dust buildup on rear wheels
- Uneven or inconsistent pedal feel from aged pad material
- Rear brake service needs on a 2004-2011 Mazda RX-8
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and contact points, and inspect the wear sensor setup if your vehicle uses one. Since mounting hardware is not included, reuse only serviceable hardware or replace it as needed during brake service. Part number 4000-1008-00 is specified for the rear position on the Mazda RX-8, so confirm the application before ordering.
Quality Assurance
Dynamite Friction’s DFC 4000 HybriDynamic line is built around a hybrid friction formulation aimed at consistent braking performance, low dust, and low noise for daily driving use. This product is identified for the 2004-2011 Mazda RX-8, rear, and is engineered to meet the demands of routine street braking service.
