Dynamite Friction 4504-52003 Disc Brake Kit - Front and Rear
Brake Kit for Buick Allure and LaCrosse
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2005-2009 Buick Allure and 2005-2009 Buick LaCrosse applications at the front and rear positions. Part number 4504-52003 combines coated rotors with advanced friction pads for a complete brake service package.
Key Features
- Fits 2005-2009 Buick Allure, front and rear
- Fits 2005-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter operation
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-52003
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers replacing worn brake components on Buick Allure and Buick LaCrosse models. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps resist rust and arrives dry, which reduces prep time during brake service. The 5000 Advanced pads are formulated for stable friction output and use shims to improve noise control. Part number 4504-52003 is a direct fitment-focused brake kit for these Buick applications.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise during light or moderate stops
- Rotor surface corrosion on exposed braking components
- Extended service time caused by oil-coated replacement rotors
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and axle position. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and do not require additional preparation before use. For Buick Allure and Buick LaCrosse brake service, verify rotor condition and pad wear on both sides of the axle before reassembly.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The finished rotor assembly is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-52003 is backed by this inspection process for Buick Allure and Buick LaCrosse brake replacement applications.
Original: $318.11
-65%$318.11
$111.34Dynamite Friction 4504-52003 Disc Brake Kit - Front and Rear
Brake Kit for Buick Allure and LaCrosse
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2005-2009 Buick Allure and 2005-2009 Buick LaCrosse applications at the front and rear positions. Part number 4504-52003 combines coated rotors with advanced friction pads for a complete brake service package.
Key Features
- Fits 2005-2009 Buick Allure, front and rear
- Fits 2005-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter operation
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-52003
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers replacing worn brake components on Buick Allure and Buick LaCrosse models. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps resist rust and arrives dry, which reduces prep time during brake service. The 5000 Advanced pads are formulated for stable friction output and use shims to improve noise control. Part number 4504-52003 is a direct fitment-focused brake kit for these Buick applications.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise during light or moderate stops
- Rotor surface corrosion on exposed braking components
- Extended service time caused by oil-coated replacement rotors
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and axle position. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and do not require additional preparation before use. For Buick Allure and Buick LaCrosse brake service, verify rotor condition and pad wear on both sides of the axle before reassembly.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The finished rotor assembly is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-52003 is backed by this inspection process for Buick Allure and Buick LaCrosse brake replacement applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Buick Allure and LaCrosse
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2005-2009 Buick Allure and 2005-2009 Buick LaCrosse applications at the front and rear positions. Part number 4504-52003 combines coated rotors with advanced friction pads for a complete brake service package.
Key Features
- Fits 2005-2009 Buick Allure, front and rear
- Fits 2005-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter operation
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-52003
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers replacing worn brake components on Buick Allure and Buick LaCrosse models. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps resist rust and arrives dry, which reduces prep time during brake service. The 5000 Advanced pads are formulated for stable friction output and use shims to improve noise control. Part number 4504-52003 is a direct fitment-focused brake kit for these Buick applications.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise during light or moderate stops
- Rotor surface corrosion on exposed braking components
- Extended service time caused by oil-coated replacement rotors
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and axle position. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The rotors are shipped dry and do not require additional preparation before use. For Buick Allure and Buick LaCrosse brake service, verify rotor condition and pad wear on both sides of the axle before reassembly.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The finished rotor assembly is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-52003 is backed by this inspection process for Buick Allure and Buick LaCrosse brake replacement applications.
