Dynamite Friction 4504-72016 Disc Brake Kit - Front and Rear
Brake Kit for Mitsubishi Lancer
Built for 2003-2006 Mitsubishi Lancer front and rear service, this DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for a complete brake refresh. Part number 4504-72016 is engineered for OE-style fitment, stable braking performance, and cleaner installation.
Key Features
- Compatible with 2003-2006 Mitsubishi Lancer, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother stops
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-72016 for easy catalog matching
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a service kit for drivers who want matched braking components in one package. For the Mitsubishi Lancer, this setup pairs coated rotors with friction material formulated for consistent response, quieter operation, and a more controlled bed-in process. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support smooth braking performance. The pads are prepared to reduce initial break-in time and deliver stable friction from the first stop. If you are searching for a front and rear brake kit for a 2003-2006 Mitsubishi Lancer, part number 4504-72016 is the direct reference.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion on daily-driven vehicles
- Brake pulsation caused by worn or uneven rotors
- Noise and vibration from aging pad and rotor surfaces
- Extended stopping distance from worn friction material
- Uneven brake feel during normal street driving
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during brake service. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. After installation, perform a proper brake bed-in procedure to help the pads and rotors seat evenly. This kit is listed for 2003-2006 Mitsubishi Lancer front and rear applications, so verify your vehicle details before ordering. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC rotors are manufactured to OE specifications, then inspected for balance and critical dimensions before release. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-72016 is backed by DFC’s controlled machining and inspection process for consistent service quality.
Original: $394.60
-65%$394.60
$138.11Dynamite Friction 4504-72016 Disc Brake Kit - Front and Rear
Brake Kit for Mitsubishi Lancer
Built for 2003-2006 Mitsubishi Lancer front and rear service, this DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for a complete brake refresh. Part number 4504-72016 is engineered for OE-style fitment, stable braking performance, and cleaner installation.
Key Features
- Compatible with 2003-2006 Mitsubishi Lancer, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother stops
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-72016 for easy catalog matching
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a service kit for drivers who want matched braking components in one package. For the Mitsubishi Lancer, this setup pairs coated rotors with friction material formulated for consistent response, quieter operation, and a more controlled bed-in process. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support smooth braking performance. The pads are prepared to reduce initial break-in time and deliver stable friction from the first stop. If you are searching for a front and rear brake kit for a 2003-2006 Mitsubishi Lancer, part number 4504-72016 is the direct reference.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion on daily-driven vehicles
- Brake pulsation caused by worn or uneven rotors
- Noise and vibration from aging pad and rotor surfaces
- Extended stopping distance from worn friction material
- Uneven brake feel during normal street driving
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during brake service. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. After installation, perform a proper brake bed-in procedure to help the pads and rotors seat evenly. This kit is listed for 2003-2006 Mitsubishi Lancer front and rear applications, so verify your vehicle details before ordering. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC rotors are manufactured to OE specifications, then inspected for balance and critical dimensions before release. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-72016 is backed by DFC’s controlled machining and inspection process for consistent service quality.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Mitsubishi Lancer
Built for 2003-2006 Mitsubishi Lancer front and rear service, this DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for a complete brake refresh. Part number 4504-72016 is engineered for OE-style fitment, stable braking performance, and cleaner installation.
Key Features
- Compatible with 2003-2006 Mitsubishi Lancer, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother stops
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-72016 for easy catalog matching
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a service kit for drivers who want matched braking components in one package. For the Mitsubishi Lancer, this setup pairs coated rotors with friction material formulated for consistent response, quieter operation, and a more controlled bed-in process. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support smooth braking performance. The pads are prepared to reduce initial break-in time and deliver stable friction from the first stop. If you are searching for a front and rear brake kit for a 2003-2006 Mitsubishi Lancer, part number 4504-72016 is the direct reference.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion on daily-driven vehicles
- Brake pulsation caused by worn or uneven rotors
- Noise and vibration from aging pad and rotor surfaces
- Extended stopping distance from worn friction material
- Uneven brake feel during normal street driving
Installation Notes
Each rotor is processed dry and ready for installation, which helps reduce prep time during brake service. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. After installation, perform a proper brake bed-in procedure to help the pads and rotors seat evenly. This kit is listed for 2003-2006 Mitsubishi Lancer front and rear applications, so verify your vehicle details before ordering. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC rotors are manufactured to OE specifications, then inspected for balance and critical dimensions before release. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-72016 is backed by DFC’s controlled machining and inspection process for consistent service quality.
