Dynamite Friction 4514-40096 Disc Brake Kit - Front and Rear
Brake Kit for Ram 2500 and 3500
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 2019-2025 Ram 2500 and 2019-2025 Ram 3500 SRW front and rear brake service. Part number 4514-40096 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a direct brake refresh.
- Fits 2019-2025 Ram 2500, front and rear
- Fits 2019-2025 Ram 3500 SRW, front and rear
- DFC 5000 Advanced pads are post-cured for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation
- GeoSpec coated rotors resist rust with a silver-gray finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware is engineered for Ram 2500 and Ram 3500 SRW brake service where OE-style fit, consistent pedal feel, and corrosion resistance matter. The rotor casting follows G3000/G11H18 cast iron specifications and is machined to tight tolerances, then finished with a non-directional surface to promote smoother pad bedding and quieter stops. The pads are formulated for axle-specific applications and assembled with noise-reducing shims. Part number 4514-40096 is a practical choice for a complete front and rear brake overhaul on these Ram trucks.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust and surface deterioration
- Longer stopping distances from worn friction components
- Brake pulsation or inconsistent braking feel from worn rotors
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean hub surfaces thoroughly, verify rotor seating, and follow the vehicle service procedure for pad bedding after installation. The dry rotor finish is ready for installation without additional preparation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. DFC brake pads are post-cured and scorched for stable performance, and the hardware kit is built to OE-style form, fit, and function. Rotors include a 12-month warranty against defects in material and workmanship.
Dynamite Friction 4514-40096 Disc Brake Kit - Front and Rear
Brake Kit for Ram 2500 and 3500
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 2019-2025 Ram 2500 and 2019-2025 Ram 3500 SRW front and rear brake service. Part number 4514-40096 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a direct brake refresh.
- Fits 2019-2025 Ram 2500, front and rear
- Fits 2019-2025 Ram 3500 SRW, front and rear
- DFC 5000 Advanced pads are post-cured for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation
- GeoSpec coated rotors resist rust with a silver-gray finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware is engineered for Ram 2500 and Ram 3500 SRW brake service where OE-style fit, consistent pedal feel, and corrosion resistance matter. The rotor casting follows G3000/G11H18 cast iron specifications and is machined to tight tolerances, then finished with a non-directional surface to promote smoother pad bedding and quieter stops. The pads are formulated for axle-specific applications and assembled with noise-reducing shims. Part number 4514-40096 is a practical choice for a complete front and rear brake overhaul on these Ram trucks.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust and surface deterioration
- Longer stopping distances from worn friction components
- Brake pulsation or inconsistent braking feel from worn rotors
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean hub surfaces thoroughly, verify rotor seating, and follow the vehicle service procedure for pad bedding after installation. The dry rotor finish is ready for installation without additional preparation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. DFC brake pads are post-cured and scorched for stable performance, and the hardware kit is built to OE-style form, fit, and function. Rotors include a 12-month warranty against defects in material and workmanship.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Ram 2500 and 3500
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 2019-2025 Ram 2500 and 2019-2025 Ram 3500 SRW front and rear brake service. Part number 4514-40096 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a direct brake refresh.
- Fits 2019-2025 Ram 2500, front and rear
- Fits 2019-2025 Ram 3500 SRW, front and rear
- DFC 5000 Advanced pads are post-cured for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation
- GeoSpec coated rotors resist rust with a silver-gray finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware is engineered for Ram 2500 and Ram 3500 SRW brake service where OE-style fit, consistent pedal feel, and corrosion resistance matter. The rotor casting follows G3000/G11H18 cast iron specifications and is machined to tight tolerances, then finished with a non-directional surface to promote smoother pad bedding and quieter stops. The pads are formulated for axle-specific applications and assembled with noise-reducing shims. Part number 4514-40096 is a practical choice for a complete front and rear brake overhaul on these Ram trucks.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust and surface deterioration
- Longer stopping distances from worn friction components
- Brake pulsation or inconsistent braking feel from worn rotors
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean hub surfaces thoroughly, verify rotor seating, and follow the vehicle service procedure for pad bedding after installation. The dry rotor finish is ready for installation without additional preparation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. DFC brake pads are post-cured and scorched for stable performance, and the hardware kit is built to OE-style form, fit, and function. Rotors include a 12-month warranty against defects in material and workmanship.
