Dynamite Friction 4514-42045 Disc Brake Kit - Front and Rear
Brake Kit for Jeep Compass Front and Rear
Restore braking performance on the 2017-2023 Jeep Compass with the DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit, part number 4514-42045. This brake service kit combines coated rotors, advanced friction pads, and matching hardware for a direct-service brake repair on front and rear applications.
Key Features
- Fits 2018-2023 Jeep Compass, front and rear
- Fits 2017 Jeep Compass, front and rear, New Body Style
- DFC 5000 Advanced brake pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors use a silver-gray protective finish to resist rust
- Rotors are machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- Hardware is engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is built for Jeep Compass brake service where consistent pedal feel, corrosion resistance, and quiet operation matter. The rotor design uses G3000/G11H18 cast iron and a dry, ready-to-install coating that eliminates the need for cleaning oil from the rotor before installation. The pad formulation is developed from DFC’s friction research process and paired with shims that support quieter braking. Part number 4514-42045 is a practical choice for drivers servicing a Jeep Compass brake job on 2017-2023 vehicles with front and rear coverage.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven pad wear from fatigued hardware
- Longer stopping distances caused by worn friction material
- Vibration or harshness during braking
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean the hub mounting surface, verify rotor seating, and follow the vehicle service procedure for pad bedding after installation. The coated rotor surface is ready to install as shipped and the coating is removed naturally by the brake pads during normal use. Confirm the vehicle is a 2017-2023 Jeep Compass before ordering, and verify whether your application is the 2017 New Body Style configuration.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship.
Dynamite Friction 4514-42045 Disc Brake Kit - Front and Rear
Brake Kit for Jeep Compass Front and Rear
Restore braking performance on the 2017-2023 Jeep Compass with the DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit, part number 4514-42045. This brake service kit combines coated rotors, advanced friction pads, and matching hardware for a direct-service brake repair on front and rear applications.
Key Features
- Fits 2018-2023 Jeep Compass, front and rear
- Fits 2017 Jeep Compass, front and rear, New Body Style
- DFC 5000 Advanced brake pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors use a silver-gray protective finish to resist rust
- Rotors are machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- Hardware is engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is built for Jeep Compass brake service where consistent pedal feel, corrosion resistance, and quiet operation matter. The rotor design uses G3000/G11H18 cast iron and a dry, ready-to-install coating that eliminates the need for cleaning oil from the rotor before installation. The pad formulation is developed from DFC’s friction research process and paired with shims that support quieter braking. Part number 4514-42045 is a practical choice for drivers servicing a Jeep Compass brake job on 2017-2023 vehicles with front and rear coverage.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven pad wear from fatigued hardware
- Longer stopping distances caused by worn friction material
- Vibration or harshness during braking
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean the hub mounting surface, verify rotor seating, and follow the vehicle service procedure for pad bedding after installation. The coated rotor surface is ready to install as shipped and the coating is removed naturally by the brake pads during normal use. Confirm the vehicle is a 2017-2023 Jeep Compass before ordering, and verify whether your application is the 2017 New Body Style configuration.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Jeep Compass Front and Rear
Restore braking performance on the 2017-2023 Jeep Compass with the DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit, part number 4514-42045. This brake service kit combines coated rotors, advanced friction pads, and matching hardware for a direct-service brake repair on front and rear applications.
Key Features
- Fits 2018-2023 Jeep Compass, front and rear
- Fits 2017 Jeep Compass, front and rear, New Body Style
- DFC 5000 Advanced brake pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors use a silver-gray protective finish to resist rust
- Rotors are machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- Hardware is engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware package is built for Jeep Compass brake service where consistent pedal feel, corrosion resistance, and quiet operation matter. The rotor design uses G3000/G11H18 cast iron and a dry, ready-to-install coating that eliminates the need for cleaning oil from the rotor before installation. The pad formulation is developed from DFC’s friction research process and paired with shims that support quieter braking. Part number 4514-42045 is a practical choice for drivers servicing a Jeep Compass brake job on 2017-2023 vehicles with front and rear coverage.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven pad wear from fatigued hardware
- Longer stopping distances caused by worn friction material
- Vibration or harshness during braking
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean the hub mounting surface, verify rotor seating, and follow the vehicle service procedure for pad bedding after installation. The coated rotor surface is ready to install as shipped and the coating is removed naturally by the brake pads during normal use. Confirm the vehicle is a 2017-2023 Jeep Compass before ordering, and verify whether your application is the 2017 New Body Style configuration.
Quality Assurance
DFC GeoSpec rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship.
