Dynamite Friction 4514-52003 Disc Brake Kit - Front and Rear
Brake Kit for Buick Allure and LaCrosse
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4514-52003, is a front and rear disc brake kit built for OE-style service replacement. It combines coated rotors, ceramic brake pads, and brake hardware for a complete brake refresh on select Buick applications.
Key Features
- Compatible with 2005-2009 Buick Allure, front and rear
- Compatible with 2005-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without extra cleaning
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-52003 is designed for drivers servicing a 2005-2009 Buick Allure or 2005-2009 Buick LaCrosse with a front and rear brake replacement. The coated rotors help resist rust better than conventional painted or zinc-coated rotors, while the ceramic pads are formulated for stable friction and quieter operation. DFC also machines and inspects the rotors to tight tolerances, then applies a non-directional finish to support consistent pad contact and smoother stops. This brake kit is a practical choice for Buick Allure and Buick LaCrosse owners looking for a complete disc brake service solution in one application-specific package.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Brake pulsation or rough braking feel from worn rotors
Installation Notes and Tips
Before installation, confirm the vehicle is a 2005-2009 Buick Allure or 2005-2009 Buick LaCrosse with the correct front and rear brake application. Inspect calipers, slides, and mounting points for wear or corrosion before assembly. Clean the hub surface thoroughly so the new rotors seat flat, and follow proper bedding procedures after installation to help the pads and rotors establish even contact.
Quality Assurance
DFC GEOSPEC rotors are processed and inspected to meet OE specifications, and each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims to support stable braking performance and reduced NVH. Part number 4514-52003 is built around OE-style fit, finish, and function for Buick Allure and Buick LaCrosse brake service.
Original: $328.84
-65%$328.84
$115.09Dynamite Friction 4514-52003 Disc Brake Kit - Front and Rear
Brake Kit for Buick Allure and LaCrosse
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4514-52003, is a front and rear disc brake kit built for OE-style service replacement. It combines coated rotors, ceramic brake pads, and brake hardware for a complete brake refresh on select Buick applications.
Key Features
- Compatible with 2005-2009 Buick Allure, front and rear
- Compatible with 2005-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without extra cleaning
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-52003 is designed for drivers servicing a 2005-2009 Buick Allure or 2005-2009 Buick LaCrosse with a front and rear brake replacement. The coated rotors help resist rust better than conventional painted or zinc-coated rotors, while the ceramic pads are formulated for stable friction and quieter operation. DFC also machines and inspects the rotors to tight tolerances, then applies a non-directional finish to support consistent pad contact and smoother stops. This brake kit is a practical choice for Buick Allure and Buick LaCrosse owners looking for a complete disc brake service solution in one application-specific package.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Brake pulsation or rough braking feel from worn rotors
Installation Notes and Tips
Before installation, confirm the vehicle is a 2005-2009 Buick Allure or 2005-2009 Buick LaCrosse with the correct front and rear brake application. Inspect calipers, slides, and mounting points for wear or corrosion before assembly. Clean the hub surface thoroughly so the new rotors seat flat, and follow proper bedding procedures after installation to help the pads and rotors establish even contact.
Quality Assurance
DFC GEOSPEC rotors are processed and inspected to meet OE specifications, and each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims to support stable braking performance and reduced NVH. Part number 4514-52003 is built around OE-style fit, finish, and function for Buick Allure and Buick LaCrosse brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Buick Allure and LaCrosse
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4514-52003, is a front and rear disc brake kit built for OE-style service replacement. It combines coated rotors, ceramic brake pads, and brake hardware for a complete brake refresh on select Buick applications.
Key Features
- Compatible with 2005-2009 Buick Allure, front and rear
- Compatible with 2005-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without extra cleaning
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-52003 is designed for drivers servicing a 2005-2009 Buick Allure or 2005-2009 Buick LaCrosse with a front and rear brake replacement. The coated rotors help resist rust better than conventional painted or zinc-coated rotors, while the ceramic pads are formulated for stable friction and quieter operation. DFC also machines and inspects the rotors to tight tolerances, then applies a non-directional finish to support consistent pad contact and smoother stops. This brake kit is a practical choice for Buick Allure and Buick LaCrosse owners looking for a complete disc brake service solution in one application-specific package.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Brake pulsation or rough braking feel from worn rotors
Installation Notes and Tips
Before installation, confirm the vehicle is a 2005-2009 Buick Allure or 2005-2009 Buick LaCrosse with the correct front and rear brake application. Inspect calipers, slides, and mounting points for wear or corrosion before assembly. Clean the hub surface thoroughly so the new rotors seat flat, and follow proper bedding procedures after installation to help the pads and rotors establish even contact.
Quality Assurance
DFC GEOSPEC rotors are processed and inspected to meet OE specifications, and each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims to support stable braking performance and reduced NVH. Part number 4514-52003 is built around OE-style fit, finish, and function for Buick Allure and Buick LaCrosse brake service.
