Dynamite Friction 4514-68000 Disc Brake Kit - Front and Rear
Brake Kit for Infiniti QX50 and QX55
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is built for drivers servicing front and rear brakes on select Infiniti crossover applications. Part number 4514-68000 combines coated rotors, advanced friction pads, and matching brake hardware in one service kit for a more complete brake refresh.
Key Features
- DFC GeoSpec coated brake rotors with a silver-gray protective finish that resists rust better than conventional paint or zinc coatings
- Rotors are processed dry and ready to install, reducing prep time during brake service
- G3000/G11H18 cast iron construction engineered to OE specifications for durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother, quieter braking
- DFC 5000 Advanced pads are post-cured and scorched to help deliver stable friction performance from the first stop
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware is a service kit designed around OE-style fit, finish, and braking behavior. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required on vented designs. The pads are formulated for consistent friction output and reduced break-in time, while the hardware kit addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. Part number 4514-68000 is a practical choice for brake service on 2019-2025 INFINITI QX50 and 2022-2025 INFINITI QX55 applications.
What This Brake Kit Helps Address
- Brake noise caused by worn pads, fatigued hardware, or uneven contact surfaces
- Rust buildup on rotor surfaces and rotor hats
- Uneven pad wear from corroded or weakened hardware
- Reduced braking consistency from aged friction materials
- Longer service time when rotors require cleaning before installation
Installation Notes and Tips
Fits 2019-2025 INFINITI QX50, front and rear. Fits 2022-2025 INFINITI QX55, front and rear. Inspect calipers, slides, and mounting points before installation, and replace any worn components that could affect pad movement or rotor alignment. The dry-coated rotors are ready for installation without additional cleaning, and the non-directional finish supports a normal pad bed-in process.
Quality Assurance
DFC states that each rotor is inspected for critical attributes to meet OE specifications, and vented rotors are checked for balance and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also sources friction development with OEM suppliers across multiple continents to match axle-specific braking requirements.
Dynamite Friction 4514-68000 Disc Brake Kit - Front and Rear
Brake Kit for Infiniti QX50 and QX55
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is built for drivers servicing front and rear brakes on select Infiniti crossover applications. Part number 4514-68000 combines coated rotors, advanced friction pads, and matching brake hardware in one service kit for a more complete brake refresh.
Key Features
- DFC GeoSpec coated brake rotors with a silver-gray protective finish that resists rust better than conventional paint or zinc coatings
- Rotors are processed dry and ready to install, reducing prep time during brake service
- G3000/G11H18 cast iron construction engineered to OE specifications for durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother, quieter braking
- DFC 5000 Advanced pads are post-cured and scorched to help deliver stable friction performance from the first stop
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware is a service kit designed around OE-style fit, finish, and braking behavior. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required on vented designs. The pads are formulated for consistent friction output and reduced break-in time, while the hardware kit addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. Part number 4514-68000 is a practical choice for brake service on 2019-2025 INFINITI QX50 and 2022-2025 INFINITI QX55 applications.
What This Brake Kit Helps Address
- Brake noise caused by worn pads, fatigued hardware, or uneven contact surfaces
- Rust buildup on rotor surfaces and rotor hats
- Uneven pad wear from corroded or weakened hardware
- Reduced braking consistency from aged friction materials
- Longer service time when rotors require cleaning before installation
Installation Notes and Tips
Fits 2019-2025 INFINITI QX50, front and rear. Fits 2022-2025 INFINITI QX55, front and rear. Inspect calipers, slides, and mounting points before installation, and replace any worn components that could affect pad movement or rotor alignment. The dry-coated rotors are ready for installation without additional cleaning, and the non-directional finish supports a normal pad bed-in process.
Quality Assurance
DFC states that each rotor is inspected for critical attributes to meet OE specifications, and vented rotors are checked for balance and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also sources friction development with OEM suppliers across multiple continents to match axle-specific braking requirements.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Kit for Infiniti QX50 and QX55
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware kit is built for drivers servicing front and rear brakes on select Infiniti crossover applications. Part number 4514-68000 combines coated rotors, advanced friction pads, and matching brake hardware in one service kit for a more complete brake refresh.
Key Features
- DFC GeoSpec coated brake rotors with a silver-gray protective finish that resists rust better than conventional paint or zinc coatings
- Rotors are processed dry and ready to install, reducing prep time during brake service
- G3000/G11H18 cast iron construction engineered to OE specifications for durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother, quieter braking
- DFC 5000 Advanced pads are post-cured and scorched to help deliver stable friction performance from the first stop
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware is a service kit designed around OE-style fit, finish, and braking behavior. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required on vented designs. The pads are formulated for consistent friction output and reduced break-in time, while the hardware kit addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. Part number 4514-68000 is a practical choice for brake service on 2019-2025 INFINITI QX50 and 2022-2025 INFINITI QX55 applications.
What This Brake Kit Helps Address
- Brake noise caused by worn pads, fatigued hardware, or uneven contact surfaces
- Rust buildup on rotor surfaces and rotor hats
- Uneven pad wear from corroded or weakened hardware
- Reduced braking consistency from aged friction materials
- Longer service time when rotors require cleaning before installation
Installation Notes and Tips
Fits 2019-2025 INFINITI QX50, front and rear. Fits 2022-2025 INFINITI QX55, front and rear. Inspect calipers, slides, and mounting points before installation, and replace any worn components that could affect pad movement or rotor alignment. The dry-coated rotors are ready for installation without additional cleaning, and the non-directional finish supports a normal pad bed-in process.
Quality Assurance
DFC states that each rotor is inspected for critical attributes to meet OE specifications, and vented rotors are checked for balance and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also sources friction development with OEM suppliers across multiple continents to match axle-specific braking requirements.
