Dynamite Friction 620-63098 Disc Brake Rotor - Front
Dynamite Friction DFC Drilled Front Rotor
The Dynamite Friction DFC Brake Rotor - Drilled, part number 620-63098, is a vented front disc brake rotor built for Mercedes-Benz applications with the Sport Package. With a 344 mm outside diameter, 64.7 mm height, and 5-bolt pattern, it is sized for direct front-axle brake service on select Mercedes-Benz SLK and SLC models.
The DFC Brake Rotor - Drilled line focuses on drilled rotor construction for front braking applications where consistent heat management and stable pedal feel matter. This rotor uses a vented design with a 32 mm nominal thickness and 30 mm discard thickness, along with a 67 mm inside diameter and 15.3 mm bolt hole diameter for the specified fitments.
Key Features
- Part number 620-63098
- Front disc brake rotor for select Mercedes-Benz vehicles
- Vented rotor design for front brake use
- 344 mm outside diameter and 64.7 mm height
- 32 mm nominal thickness and 30 mm discard thickness
- 5-bolt hole pattern with 15.3 mm bolt holes
- Compatible with vehicles equipped with the Sport Package where noted
Fitment Details
- Fits 2017-2020 Mercedes-Benz SLC300, front. Fitment: Compatible with vehicles equipped with the Sport Package.
- Fits 2016 Mercedes-Benz SLK300, front. Fitment: Compatible with vehicles equipped with the Sport Package.
- Fits 2012-2016 Mercedes-Benz SLK350, front.
- Fits 2012-2015 Mercedes-Benz SLK250, front. Fitment: Compatible with vehicles equipped with the Sport Package.
What This Rotor Helps Address
- Front brake rotor wear that requires replacement
- Brake pulsation caused by rotor thickness loss or surface damage
- Heat buildup during repeated braking
- Reduced braking consistency on the front axle
- Service needs on Mercedes-Benz SLK300, SLK350, SLK250, and SLC300 front brake systems
Installation Notes and Tips
Confirm rotor dimensions, bolt pattern, and front-axle fitment before installation. This part number 620-63098 is listed for specific Mercedes-Benz SLK and SLC applications, including Sport Package-equipped vehicles where noted, so verify the vehicle’s brake package against the fitment data before ordering. Inspect pads, calipers, and hub surfaces during rotor replacement to help ensure proper brake operation.
Quality Assurance
Dynamite Friction supplies the DFC Brake Rotor - Drilled line as a technical brake component for specified vehicle applications. This rotor is built to the listed dimensional requirements for the confirmed Mercedes-Benz fitments, including 2012-2020 Mercedes-Benz SLK and SLC front applications shown above.
Dynamite Friction 620-63098 Disc Brake Rotor - Front
Dynamite Friction DFC Drilled Front Rotor
The Dynamite Friction DFC Brake Rotor - Drilled, part number 620-63098, is a vented front disc brake rotor built for Mercedes-Benz applications with the Sport Package. With a 344 mm outside diameter, 64.7 mm height, and 5-bolt pattern, it is sized for direct front-axle brake service on select Mercedes-Benz SLK and SLC models.
The DFC Brake Rotor - Drilled line focuses on drilled rotor construction for front braking applications where consistent heat management and stable pedal feel matter. This rotor uses a vented design with a 32 mm nominal thickness and 30 mm discard thickness, along with a 67 mm inside diameter and 15.3 mm bolt hole diameter for the specified fitments.
Key Features
- Part number 620-63098
- Front disc brake rotor for select Mercedes-Benz vehicles
- Vented rotor design for front brake use
- 344 mm outside diameter and 64.7 mm height
- 32 mm nominal thickness and 30 mm discard thickness
- 5-bolt hole pattern with 15.3 mm bolt holes
- Compatible with vehicles equipped with the Sport Package where noted
Fitment Details
- Fits 2017-2020 Mercedes-Benz SLC300, front. Fitment: Compatible with vehicles equipped with the Sport Package.
- Fits 2016 Mercedes-Benz SLK300, front. Fitment: Compatible with vehicles equipped with the Sport Package.
- Fits 2012-2016 Mercedes-Benz SLK350, front.
- Fits 2012-2015 Mercedes-Benz SLK250, front. Fitment: Compatible with vehicles equipped with the Sport Package.
What This Rotor Helps Address
- Front brake rotor wear that requires replacement
- Brake pulsation caused by rotor thickness loss or surface damage
- Heat buildup during repeated braking
- Reduced braking consistency on the front axle
- Service needs on Mercedes-Benz SLK300, SLK350, SLK250, and SLC300 front brake systems
Installation Notes and Tips
Confirm rotor dimensions, bolt pattern, and front-axle fitment before installation. This part number 620-63098 is listed for specific Mercedes-Benz SLK and SLC applications, including Sport Package-equipped vehicles where noted, so verify the vehicle’s brake package against the fitment data before ordering. Inspect pads, calipers, and hub surfaces during rotor replacement to help ensure proper brake operation.
Quality Assurance
Dynamite Friction supplies the DFC Brake Rotor - Drilled line as a technical brake component for specified vehicle applications. This rotor is built to the listed dimensional requirements for the confirmed Mercedes-Benz fitments, including 2012-2020 Mercedes-Benz SLK and SLC front applications shown above.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dynamite Friction DFC Drilled Front Rotor
The Dynamite Friction DFC Brake Rotor - Drilled, part number 620-63098, is a vented front disc brake rotor built for Mercedes-Benz applications with the Sport Package. With a 344 mm outside diameter, 64.7 mm height, and 5-bolt pattern, it is sized for direct front-axle brake service on select Mercedes-Benz SLK and SLC models.
The DFC Brake Rotor - Drilled line focuses on drilled rotor construction for front braking applications where consistent heat management and stable pedal feel matter. This rotor uses a vented design with a 32 mm nominal thickness and 30 mm discard thickness, along with a 67 mm inside diameter and 15.3 mm bolt hole diameter for the specified fitments.
Key Features
- Part number 620-63098
- Front disc brake rotor for select Mercedes-Benz vehicles
- Vented rotor design for front brake use
- 344 mm outside diameter and 64.7 mm height
- 32 mm nominal thickness and 30 mm discard thickness
- 5-bolt hole pattern with 15.3 mm bolt holes
- Compatible with vehicles equipped with the Sport Package where noted
Fitment Details
- Fits 2017-2020 Mercedes-Benz SLC300, front. Fitment: Compatible with vehicles equipped with the Sport Package.
- Fits 2016 Mercedes-Benz SLK300, front. Fitment: Compatible with vehicles equipped with the Sport Package.
- Fits 2012-2016 Mercedes-Benz SLK350, front.
- Fits 2012-2015 Mercedes-Benz SLK250, front. Fitment: Compatible with vehicles equipped with the Sport Package.
What This Rotor Helps Address
- Front brake rotor wear that requires replacement
- Brake pulsation caused by rotor thickness loss or surface damage
- Heat buildup during repeated braking
- Reduced braking consistency on the front axle
- Service needs on Mercedes-Benz SLK300, SLK350, SLK250, and SLC300 front brake systems
Installation Notes and Tips
Confirm rotor dimensions, bolt pattern, and front-axle fitment before installation. This part number 620-63098 is listed for specific Mercedes-Benz SLK and SLC applications, including Sport Package-equipped vehicles where noted, so verify the vehicle’s brake package against the fitment data before ordering. Inspect pads, calipers, and hub surfaces during rotor replacement to help ensure proper brake operation.
Quality Assurance
Dynamite Friction supplies the DFC Brake Rotor - Drilled line as a technical brake component for specified vehicle applications. This rotor is built to the listed dimensional requirements for the confirmed Mercedes-Benz fitments, including 2012-2020 Mercedes-Benz SLK and SLC front applications shown above.
