Dynamite Friction 7002-47036 Disc Brake Rotor Set - Front
Drilled and Slotted Front Brake Rotors
DFC Friction DFC Brake Rotors - Drilled and Slotted - Silver, part number 7002-47036, are built for drivers who want OE-style fitment with added braking performance. This front disc brake rotor set is compatible with 2002-2007 Saturn Vue, 2005-2006 Chevrolet Equinox, and 2006 Pontiac Torrent applications.
The drilled and slotted design helps increase pad bite, shed heat, and clear brake dust and road debris from the rotor surface. That makes this rotor set a practical choice for front brake service on a Saturn Vue front rotor replacement, Chevrolet Equinox front brake rotor upgrade, or Pontiac Torrent front disc brake repair.
Key Features
- Drilled holes help reduce heat buildup during braking
- Slots help remove debris and reduce pad glazing
- GEOSPEC coated finish supports corrosion resistance
- G3000/G11H18 cast iron specification for OE-style durability
- Non-directional finish promotes even pad bed-in and smoother stops
- Machined to tight tolerances and inspected for balance and critical dimensions
- Part number 7002-47036 for front axle applications
Product Details
DFC Friction’s DFC Brake Rotors - Drilled and Slotted - Silver line is focused on performance-oriented braking with OE-matching construction standards. Each rotor is machined for dimensional accuracy, finished to support consistent pad contact, and checked to help ensure stable operation. The silver GEOSPEC coating adds a clean, protected surface finish while the vented rotor design and inspection process support reliable front brake performance.
This part number 7002-47036 is a direct-fit option for 2002-2007 Saturn Vue front brakes, 2005-2006 Chevrolet Equinox front brakes, and 2006 Pontiac Torrent front brakes. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Excessive brake fade from heat buildup
- Brake noise caused by glazed pads or debris
- Uneven rotor wear from inconsistent pad contact
- Reduced stopping response in wet conditions
- Corrosion on exposed rotor surfaces
Installation Notes
Verify front axle fitment before installation and confirm rotor dimensions against the original part. Clean the rotor friction surfaces before service, and follow proper brake bedding procedures after installation to help the pads seat evenly. For best results, inspect pads, calipers, and brake fluid condition during rotor replacement.
Quality Assurance
DFC Friction states that these rotors are manufactured to OE specifications and undergo machining, balance correction where needed, and final inspection of critical attributes. Part number 7002-47036 is backed by a 12 month or 12,000 mile limited warranty against defects in material and workmanship.
Dynamite Friction 7002-47036 Disc Brake Rotor Set - Front
Drilled and Slotted Front Brake Rotors
DFC Friction DFC Brake Rotors - Drilled and Slotted - Silver, part number 7002-47036, are built for drivers who want OE-style fitment with added braking performance. This front disc brake rotor set is compatible with 2002-2007 Saturn Vue, 2005-2006 Chevrolet Equinox, and 2006 Pontiac Torrent applications.
The drilled and slotted design helps increase pad bite, shed heat, and clear brake dust and road debris from the rotor surface. That makes this rotor set a practical choice for front brake service on a Saturn Vue front rotor replacement, Chevrolet Equinox front brake rotor upgrade, or Pontiac Torrent front disc brake repair.
Key Features
- Drilled holes help reduce heat buildup during braking
- Slots help remove debris and reduce pad glazing
- GEOSPEC coated finish supports corrosion resistance
- G3000/G11H18 cast iron specification for OE-style durability
- Non-directional finish promotes even pad bed-in and smoother stops
- Machined to tight tolerances and inspected for balance and critical dimensions
- Part number 7002-47036 for front axle applications
Product Details
DFC Friction’s DFC Brake Rotors - Drilled and Slotted - Silver line is focused on performance-oriented braking with OE-matching construction standards. Each rotor is machined for dimensional accuracy, finished to support consistent pad contact, and checked to help ensure stable operation. The silver GEOSPEC coating adds a clean, protected surface finish while the vented rotor design and inspection process support reliable front brake performance.
This part number 7002-47036 is a direct-fit option for 2002-2007 Saturn Vue front brakes, 2005-2006 Chevrolet Equinox front brakes, and 2006 Pontiac Torrent front brakes. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Excessive brake fade from heat buildup
- Brake noise caused by glazed pads or debris
- Uneven rotor wear from inconsistent pad contact
- Reduced stopping response in wet conditions
- Corrosion on exposed rotor surfaces
Installation Notes
Verify front axle fitment before installation and confirm rotor dimensions against the original part. Clean the rotor friction surfaces before service, and follow proper brake bedding procedures after installation to help the pads seat evenly. For best results, inspect pads, calipers, and brake fluid condition during rotor replacement.
Quality Assurance
DFC Friction states that these rotors are manufactured to OE specifications and undergo machining, balance correction where needed, and final inspection of critical attributes. Part number 7002-47036 is backed by a 12 month or 12,000 mile limited warranty against defects in material and workmanship.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Drilled and Slotted Front Brake Rotors
DFC Friction DFC Brake Rotors - Drilled and Slotted - Silver, part number 7002-47036, are built for drivers who want OE-style fitment with added braking performance. This front disc brake rotor set is compatible with 2002-2007 Saturn Vue, 2005-2006 Chevrolet Equinox, and 2006 Pontiac Torrent applications.
The drilled and slotted design helps increase pad bite, shed heat, and clear brake dust and road debris from the rotor surface. That makes this rotor set a practical choice for front brake service on a Saturn Vue front rotor replacement, Chevrolet Equinox front brake rotor upgrade, or Pontiac Torrent front disc brake repair.
Key Features
- Drilled holes help reduce heat buildup during braking
- Slots help remove debris and reduce pad glazing
- GEOSPEC coated finish supports corrosion resistance
- G3000/G11H18 cast iron specification for OE-style durability
- Non-directional finish promotes even pad bed-in and smoother stops
- Machined to tight tolerances and inspected for balance and critical dimensions
- Part number 7002-47036 for front axle applications
Product Details
DFC Friction’s DFC Brake Rotors - Drilled and Slotted - Silver line is focused on performance-oriented braking with OE-matching construction standards. Each rotor is machined for dimensional accuracy, finished to support consistent pad contact, and checked to help ensure stable operation. The silver GEOSPEC coating adds a clean, protected surface finish while the vented rotor design and inspection process support reliable front brake performance.
This part number 7002-47036 is a direct-fit option for 2002-2007 Saturn Vue front brakes, 2005-2006 Chevrolet Equinox front brakes, and 2006 Pontiac Torrent front brakes. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Excessive brake fade from heat buildup
- Brake noise caused by glazed pads or debris
- Uneven rotor wear from inconsistent pad contact
- Reduced stopping response in wet conditions
- Corrosion on exposed rotor surfaces
Installation Notes
Verify front axle fitment before installation and confirm rotor dimensions against the original part. Clean the rotor friction surfaces before service, and follow proper brake bedding procedures after installation to help the pads seat evenly. For best results, inspect pads, calipers, and brake fluid condition during rotor replacement.
Quality Assurance
DFC Friction states that these rotors are manufactured to OE specifications and undergo machining, balance correction where needed, and final inspection of critical attributes. Part number 7002-47036 is backed by a 12 month or 12,000 mile limited warranty against defects in material and workmanship.
