Gates 22512 Radiator Coolant Hose - Tee To Engine
Gates 22512 Molded Coolant Hose Overview
The Gates 22512 molded coolant hose is a molded radiator coolant hose built for specific engine cooling applications. It uses EPDM and plastic construction and follows an OE-style modular design with an integrated branch for the correct routing on the vehicle.
Compatible with select Isuzu Rodeo, Rodeo Sport, Amigo, and 1998 Chevrolet LUV applications, this molded coolant hose supports the tee-to-engine coolant path with application-specific dimensions and formed routing. Gates Molded Coolant Hose products are built around the original hose layout, including integrated components where required.
Key Features
- Part number 22512 molded coolant hose for specific radiator cooling applications
- EPDM and plastic construction for coolant system service
- Molded design with one branch for OE-style routing
- Centerline length: 16 in. / 244 mm / 9.6 in.
- End inside diameters: 16 mm (.62 in.), 19 mm (.73 in.), and 16 mm (.62 in.)
- No spring and no quick-connect fittings
- Fits tee-to-engine routing on select Isuzu and Chevrolet vehicles
Product Details
Gates Molded Coolant Hose line focuses on application-specific coolant hose assemblies that follow original equipment routing and component placement. The 22512 is a molded branch hose with dimensions and end sizes matched to the listed applications, helping maintain proper coolant flow path in the engine cooling circuit. This part cross-references Anchor 9145 for the same application.
Use Gates 22512 when replacing a formed radiator coolant hose on 1998-2003 Isuzu Rodeo, 2001-2003 Isuzu Rodeo Sport, 1998-2000 Isuzu Amigo, or 1998 Chevrolet LUV with tee-to-engine routing. The molded shape and branch configuration help match the factory hose path on these vehicles.
Common Problems This Hose Addresses
- Cracked or split coolant hose material
- Coolant leaks at a molded branch or formed section
- Incorrect hose routing after prior repair work
- Softening, swelling, or deterioration from heat and coolant exposure
- Loss of proper coolant circulation through the tee-to-engine line
Installation Notes
Verify hose routing, end diameters, and branch orientation against the removed part before installation. Confirm fitment on the specific Isuzu Rodeo, Rodeo Sport, Amigo, or Chevrolet LUV application listed for the vehicle, and inspect adjoining clamps, necks, and coolant passages for wear or contamination before reassembly.
Quality Assurance
Gates is a recognized aftermarket supplier of modular coolant hose assemblies, and this molded hose is built to follow OE-style application requirements for the listed vehicles. Part number 22512 is manufactured for direct replacement use in the specified cooling system applications.
Gates 22512 Radiator Coolant Hose - Tee To Engine
Gates 22512 Molded Coolant Hose Overview
The Gates 22512 molded coolant hose is a molded radiator coolant hose built for specific engine cooling applications. It uses EPDM and plastic construction and follows an OE-style modular design with an integrated branch for the correct routing on the vehicle.
Compatible with select Isuzu Rodeo, Rodeo Sport, Amigo, and 1998 Chevrolet LUV applications, this molded coolant hose supports the tee-to-engine coolant path with application-specific dimensions and formed routing. Gates Molded Coolant Hose products are built around the original hose layout, including integrated components where required.
Key Features
- Part number 22512 molded coolant hose for specific radiator cooling applications
- EPDM and plastic construction for coolant system service
- Molded design with one branch for OE-style routing
- Centerline length: 16 in. / 244 mm / 9.6 in.
- End inside diameters: 16 mm (.62 in.), 19 mm (.73 in.), and 16 mm (.62 in.)
- No spring and no quick-connect fittings
- Fits tee-to-engine routing on select Isuzu and Chevrolet vehicles
Product Details
Gates Molded Coolant Hose line focuses on application-specific coolant hose assemblies that follow original equipment routing and component placement. The 22512 is a molded branch hose with dimensions and end sizes matched to the listed applications, helping maintain proper coolant flow path in the engine cooling circuit. This part cross-references Anchor 9145 for the same application.
Use Gates 22512 when replacing a formed radiator coolant hose on 1998-2003 Isuzu Rodeo, 2001-2003 Isuzu Rodeo Sport, 1998-2000 Isuzu Amigo, or 1998 Chevrolet LUV with tee-to-engine routing. The molded shape and branch configuration help match the factory hose path on these vehicles.
Common Problems This Hose Addresses
- Cracked or split coolant hose material
- Coolant leaks at a molded branch or formed section
- Incorrect hose routing after prior repair work
- Softening, swelling, or deterioration from heat and coolant exposure
- Loss of proper coolant circulation through the tee-to-engine line
Installation Notes
Verify hose routing, end diameters, and branch orientation against the removed part before installation. Confirm fitment on the specific Isuzu Rodeo, Rodeo Sport, Amigo, or Chevrolet LUV application listed for the vehicle, and inspect adjoining clamps, necks, and coolant passages for wear or contamination before reassembly.
Quality Assurance
Gates is a recognized aftermarket supplier of modular coolant hose assemblies, and this molded hose is built to follow OE-style application requirements for the listed vehicles. Part number 22512 is manufactured for direct replacement use in the specified cooling system applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Gates 22512 Molded Coolant Hose Overview
The Gates 22512 molded coolant hose is a molded radiator coolant hose built for specific engine cooling applications. It uses EPDM and plastic construction and follows an OE-style modular design with an integrated branch for the correct routing on the vehicle.
Compatible with select Isuzu Rodeo, Rodeo Sport, Amigo, and 1998 Chevrolet LUV applications, this molded coolant hose supports the tee-to-engine coolant path with application-specific dimensions and formed routing. Gates Molded Coolant Hose products are built around the original hose layout, including integrated components where required.
Key Features
- Part number 22512 molded coolant hose for specific radiator cooling applications
- EPDM and plastic construction for coolant system service
- Molded design with one branch for OE-style routing
- Centerline length: 16 in. / 244 mm / 9.6 in.
- End inside diameters: 16 mm (.62 in.), 19 mm (.73 in.), and 16 mm (.62 in.)
- No spring and no quick-connect fittings
- Fits tee-to-engine routing on select Isuzu and Chevrolet vehicles
Product Details
Gates Molded Coolant Hose line focuses on application-specific coolant hose assemblies that follow original equipment routing and component placement. The 22512 is a molded branch hose with dimensions and end sizes matched to the listed applications, helping maintain proper coolant flow path in the engine cooling circuit. This part cross-references Anchor 9145 for the same application.
Use Gates 22512 when replacing a formed radiator coolant hose on 1998-2003 Isuzu Rodeo, 2001-2003 Isuzu Rodeo Sport, 1998-2000 Isuzu Amigo, or 1998 Chevrolet LUV with tee-to-engine routing. The molded shape and branch configuration help match the factory hose path on these vehicles.
Common Problems This Hose Addresses
- Cracked or split coolant hose material
- Coolant leaks at a molded branch or formed section
- Incorrect hose routing after prior repair work
- Softening, swelling, or deterioration from heat and coolant exposure
- Loss of proper coolant circulation through the tee-to-engine line
Installation Notes
Verify hose routing, end diameters, and branch orientation against the removed part before installation. Confirm fitment on the specific Isuzu Rodeo, Rodeo Sport, Amigo, or Chevrolet LUV application listed for the vehicle, and inspect adjoining clamps, necks, and coolant passages for wear or contamination before reassembly.
Quality Assurance
Gates is a recognized aftermarket supplier of modular coolant hose assemblies, and this molded hose is built to follow OE-style application requirements for the listed vehicles. Part number 22512 is manufactured for direct replacement use in the specified cooling system applications.
