Gates 23099 Radiator Coolant Hose - Upper - Engine To Radiator
Gates 23099 Molded Coolant Hose Overview
The Gates 23099 molded coolant hose is an OE-style radiator coolant hose built for upper, lower, bypass, heater, and other cooling system routing needs. Made from EPDM and formed to OEM-quality specifications, it supports a precise replacement for radiator hose service on vehicles such as Honda Civic and Toyota Camry applications where molded hose shape matters.
Gates Molded Coolant Hose line is engineered as a broad replacement range for common cooling system layouts, helping reduce the need to source a dealer-only hose for the same application. Part number 23099 is shaped for a direct-fit style replacement where the original hose follows a molded path.
Key Features
- Brand: Gates Molded Coolant Hose
- Part number: 23099
- Material: EPDM for cooling system use
- Molded design for routed radiator coolant applications
- End 1 inside diameter: 1.75 in. (44 mm)
- End 2 inside diameter: 2 in. (51 mm)
- Centerline length: 39.5 in. (1003 mm)
- No spring, no modular hose, and no quick-connect fittings
Detailed Description
Gates 23099 is a molded radiator coolant hose designed to match the shape and dimensions needed in specific cooling system layouts. The EPDM construction is suited for coolant service, while the molded profile helps maintain the original hose routing and connection geometry. This makes it a practical replacement choice for radiator coolant hose service on vehicles including Honda Civic and Toyota Camry, especially when the factory hose uses a formed bend rather than a straight section.
As part of the Gates Molded Coolant Hose line, 23099 is built for upper, lower, bypass, heater, and related coolant applications where an OEM-style molded replacement is required. This part cross-references Four Seasons (e.g., 66759) for the same application.
What It Helps Solve
- Coolant leaks caused by cracked or aged radiator hose material
- Improper hose routing from a collapsed or misshaped molded hose
- Cooling system service when the original hose is no longer reusable
- Fitment issues from using a universal hose in a formed application
- Replacement needs for OE-style radiator coolant hose service
Installation Notes and Tips
Verify end diameters and centerline length against the original hose before installation. Confirm the hose routing matches the vehicle’s molded path and inspect adjoining clamps, necks, and coolant connections for wear or corrosion. After installation, refill and bleed the cooling system according to the vehicle service procedure and check for leaks at operating temperature.
Quality Assurance
Gates manufactures this molded coolant hose to OEM-quality specifications for cooling system replacement use. The molded construction and EPDM material support consistent fit and service performance in radiator coolant hose applications.
Gates 23099 Radiator Coolant Hose - Upper - Engine To Radiator
Gates 23099 Molded Coolant Hose Overview
The Gates 23099 molded coolant hose is an OE-style radiator coolant hose built for upper, lower, bypass, heater, and other cooling system routing needs. Made from EPDM and formed to OEM-quality specifications, it supports a precise replacement for radiator hose service on vehicles such as Honda Civic and Toyota Camry applications where molded hose shape matters.
Gates Molded Coolant Hose line is engineered as a broad replacement range for common cooling system layouts, helping reduce the need to source a dealer-only hose for the same application. Part number 23099 is shaped for a direct-fit style replacement where the original hose follows a molded path.
Key Features
- Brand: Gates Molded Coolant Hose
- Part number: 23099
- Material: EPDM for cooling system use
- Molded design for routed radiator coolant applications
- End 1 inside diameter: 1.75 in. (44 mm)
- End 2 inside diameter: 2 in. (51 mm)
- Centerline length: 39.5 in. (1003 mm)
- No spring, no modular hose, and no quick-connect fittings
Detailed Description
Gates 23099 is a molded radiator coolant hose designed to match the shape and dimensions needed in specific cooling system layouts. The EPDM construction is suited for coolant service, while the molded profile helps maintain the original hose routing and connection geometry. This makes it a practical replacement choice for radiator coolant hose service on vehicles including Honda Civic and Toyota Camry, especially when the factory hose uses a formed bend rather than a straight section.
As part of the Gates Molded Coolant Hose line, 23099 is built for upper, lower, bypass, heater, and related coolant applications where an OEM-style molded replacement is required. This part cross-references Four Seasons (e.g., 66759) for the same application.
What It Helps Solve
- Coolant leaks caused by cracked or aged radiator hose material
- Improper hose routing from a collapsed or misshaped molded hose
- Cooling system service when the original hose is no longer reusable
- Fitment issues from using a universal hose in a formed application
- Replacement needs for OE-style radiator coolant hose service
Installation Notes and Tips
Verify end diameters and centerline length against the original hose before installation. Confirm the hose routing matches the vehicle’s molded path and inspect adjoining clamps, necks, and coolant connections for wear or corrosion. After installation, refill and bleed the cooling system according to the vehicle service procedure and check for leaks at operating temperature.
Quality Assurance
Gates manufactures this molded coolant hose to OEM-quality specifications for cooling system replacement use. The molded construction and EPDM material support consistent fit and service performance in radiator coolant hose applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Gates 23099 Molded Coolant Hose Overview
The Gates 23099 molded coolant hose is an OE-style radiator coolant hose built for upper, lower, bypass, heater, and other cooling system routing needs. Made from EPDM and formed to OEM-quality specifications, it supports a precise replacement for radiator hose service on vehicles such as Honda Civic and Toyota Camry applications where molded hose shape matters.
Gates Molded Coolant Hose line is engineered as a broad replacement range for common cooling system layouts, helping reduce the need to source a dealer-only hose for the same application. Part number 23099 is shaped for a direct-fit style replacement where the original hose follows a molded path.
Key Features
- Brand: Gates Molded Coolant Hose
- Part number: 23099
- Material: EPDM for cooling system use
- Molded design for routed radiator coolant applications
- End 1 inside diameter: 1.75 in. (44 mm)
- End 2 inside diameter: 2 in. (51 mm)
- Centerline length: 39.5 in. (1003 mm)
- No spring, no modular hose, and no quick-connect fittings
Detailed Description
Gates 23099 is a molded radiator coolant hose designed to match the shape and dimensions needed in specific cooling system layouts. The EPDM construction is suited for coolant service, while the molded profile helps maintain the original hose routing and connection geometry. This makes it a practical replacement choice for radiator coolant hose service on vehicles including Honda Civic and Toyota Camry, especially when the factory hose uses a formed bend rather than a straight section.
As part of the Gates Molded Coolant Hose line, 23099 is built for upper, lower, bypass, heater, and related coolant applications where an OEM-style molded replacement is required. This part cross-references Four Seasons (e.g., 66759) for the same application.
What It Helps Solve
- Coolant leaks caused by cracked or aged radiator hose material
- Improper hose routing from a collapsed or misshaped molded hose
- Cooling system service when the original hose is no longer reusable
- Fitment issues from using a universal hose in a formed application
- Replacement needs for OE-style radiator coolant hose service
Installation Notes and Tips
Verify end diameters and centerline length against the original hose before installation. Confirm the hose routing matches the vehicle’s molded path and inspect adjoining clamps, necks, and coolant connections for wear or corrosion. After installation, refill and bleed the cooling system according to the vehicle service procedure and check for leaks at operating temperature.
Quality Assurance
Gates manufactures this molded coolant hose to OEM-quality specifications for cooling system replacement use. The molded construction and EPDM material support consistent fit and service performance in radiator coolant hose applications.
