InMotion WA512414 Wheel Bearing and Hub Assembly - Rear
Rear Wheel Hub Assembly for Volvo Applications
InMotion WA512414 is a rear wheel bearing and hub assembly built for direct replacement use on select Volvo models. It is engineered from OE data and measurements to support proper fitment, wheel mounting accuracy, and long-term service on the rear axle.
Compatible with Volvo S60, S60 Cross Country, V60, V60 Cross Country, XC70, and S80 rear applications, this hub assembly is designed for standard grade fitments across multiple model years.
Key Features
- Rear wheel bearing and hub assembly for select Volvo vehicles
- OE-based dimensions for fitment, performance, and durability
- 36-spline design
- 5 wheel studs and 4 flange bolt holes
- Modified flange shape with 63.1 flange offset
- Wheel pilot diameter: 63.2
- Brake pilot diameter: 63.5
- Hub pilot diameter: 81.4
- Bolt circle diameter: 108.0 / 4.213
- ABS sensor not included
Detailed Description
InMotion WA512414 is manufactured with high-precision processes and strict quality-control standards to match the original rear hub assembly dimensions used on the listed Volvo platforms. The assembly is built for direct replacement service and is intended to restore proper wheel mounting geometry, hub support, and brake interface alignment on rear-wheel applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Fits 2014-2018 Volvo S60, rear; Fits 2011 Volvo S60, rear; Fits 2016-2018 Volvo S60 Cross Country, rear; Fits 2015-2018 Volvo V60, rear; Fits 2015-2018 Volvo V60 Cross Country, rear; Fits 2008-2016 Volvo XC70, rear; Fits 2007-2014 Volvo S80, rear.
What This Part Helps Address
- Rear wheel bearing noise or roughness
- Excessive wheel play or looseness at the hub
- Uneven wheel mounting or vibration concerns
- Hub wear affecting brake and wheel alignment at the rear axle
- Replacement needs after hub or bearing service on Volvo rear suspension systems
Installation Notes and Tips
Verify rear fitment by year, model, and standard grade application before installation. Confirm the 36-spline configuration, 5-stud wheel pattern, and 108.0 bolt circle diameter against the original part. Because the ABS sensor is not included, reuse or source the vehicle’s sensor as required by the application. Inspect related mounting surfaces, fasteners, and brake components during service to help ensure proper hub seating and alignment.
Quality Assurance
InMotion manufactures this hub assembly using OE data and measurements, with application-specific engineering and controlled production standards to support consistent fitment and service life on the listed Volvo rear applications.
InMotion WA512414 Wheel Bearing and Hub Assembly - Rear
Rear Wheel Hub Assembly for Volvo Applications
InMotion WA512414 is a rear wheel bearing and hub assembly built for direct replacement use on select Volvo models. It is engineered from OE data and measurements to support proper fitment, wheel mounting accuracy, and long-term service on the rear axle.
Compatible with Volvo S60, S60 Cross Country, V60, V60 Cross Country, XC70, and S80 rear applications, this hub assembly is designed for standard grade fitments across multiple model years.
Key Features
- Rear wheel bearing and hub assembly for select Volvo vehicles
- OE-based dimensions for fitment, performance, and durability
- 36-spline design
- 5 wheel studs and 4 flange bolt holes
- Modified flange shape with 63.1 flange offset
- Wheel pilot diameter: 63.2
- Brake pilot diameter: 63.5
- Hub pilot diameter: 81.4
- Bolt circle diameter: 108.0 / 4.213
- ABS sensor not included
Detailed Description
InMotion WA512414 is manufactured with high-precision processes and strict quality-control standards to match the original rear hub assembly dimensions used on the listed Volvo platforms. The assembly is built for direct replacement service and is intended to restore proper wheel mounting geometry, hub support, and brake interface alignment on rear-wheel applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Fits 2014-2018 Volvo S60, rear; Fits 2011 Volvo S60, rear; Fits 2016-2018 Volvo S60 Cross Country, rear; Fits 2015-2018 Volvo V60, rear; Fits 2015-2018 Volvo V60 Cross Country, rear; Fits 2008-2016 Volvo XC70, rear; Fits 2007-2014 Volvo S80, rear.
What This Part Helps Address
- Rear wheel bearing noise or roughness
- Excessive wheel play or looseness at the hub
- Uneven wheel mounting or vibration concerns
- Hub wear affecting brake and wheel alignment at the rear axle
- Replacement needs after hub or bearing service on Volvo rear suspension systems
Installation Notes and Tips
Verify rear fitment by year, model, and standard grade application before installation. Confirm the 36-spline configuration, 5-stud wheel pattern, and 108.0 bolt circle diameter against the original part. Because the ABS sensor is not included, reuse or source the vehicle’s sensor as required by the application. Inspect related mounting surfaces, fasteners, and brake components during service to help ensure proper hub seating and alignment.
Quality Assurance
InMotion manufactures this hub assembly using OE data and measurements, with application-specific engineering and controlled production standards to support consistent fitment and service life on the listed Volvo rear applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Wheel Hub Assembly for Volvo Applications
InMotion WA512414 is a rear wheel bearing and hub assembly built for direct replacement use on select Volvo models. It is engineered from OE data and measurements to support proper fitment, wheel mounting accuracy, and long-term service on the rear axle.
Compatible with Volvo S60, S60 Cross Country, V60, V60 Cross Country, XC70, and S80 rear applications, this hub assembly is designed for standard grade fitments across multiple model years.
Key Features
- Rear wheel bearing and hub assembly for select Volvo vehicles
- OE-based dimensions for fitment, performance, and durability
- 36-spline design
- 5 wheel studs and 4 flange bolt holes
- Modified flange shape with 63.1 flange offset
- Wheel pilot diameter: 63.2
- Brake pilot diameter: 63.5
- Hub pilot diameter: 81.4
- Bolt circle diameter: 108.0 / 4.213
- ABS sensor not included
Detailed Description
InMotion WA512414 is manufactured with high-precision processes and strict quality-control standards to match the original rear hub assembly dimensions used on the listed Volvo platforms. The assembly is built for direct replacement service and is intended to restore proper wheel mounting geometry, hub support, and brake interface alignment on rear-wheel applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Fits 2014-2018 Volvo S60, rear; Fits 2011 Volvo S60, rear; Fits 2016-2018 Volvo S60 Cross Country, rear; Fits 2015-2018 Volvo V60, rear; Fits 2015-2018 Volvo V60 Cross Country, rear; Fits 2008-2016 Volvo XC70, rear; Fits 2007-2014 Volvo S80, rear.
What This Part Helps Address
- Rear wheel bearing noise or roughness
- Excessive wheel play or looseness at the hub
- Uneven wheel mounting or vibration concerns
- Hub wear affecting brake and wheel alignment at the rear axle
- Replacement needs after hub or bearing service on Volvo rear suspension systems
Installation Notes and Tips
Verify rear fitment by year, model, and standard grade application before installation. Confirm the 36-spline configuration, 5-stud wheel pattern, and 108.0 bolt circle diameter against the original part. Because the ABS sensor is not included, reuse or source the vehicle’s sensor as required by the application. Inspect related mounting surfaces, fasteners, and brake components during service to help ensure proper hub seating and alignment.
Quality Assurance
InMotion manufactures this hub assembly using OE data and measurements, with application-specific engineering and controlled production standards to support consistent fitment and service life on the listed Volvo rear applications.
