InMotion WA512523 Wheel Bearing and Hub Assembly - Rear
Rear Wheel Hub Assembly for Mazda 3
InMotion WA512523 is a rear wheel bearing and hub assembly engineered for 2014-2018 Mazda 3 and Mazda 3 Sport Standard Grade applications. Built from OE data and measurements, it is made for direct replacement use where precise fitment, stable wheel support, and consistent sensor performance matter.
Key Features
- Direct replacement rear hub assembly for Mazda 3 and Mazda 3 Sport
- Engineered from OE data and dimensional measurements
- High-precision manufacturing with strict quality-control criteria
- Integrated ABS wheel speed sensor included
- 5 wheel studs with 4 flange bolt holes
- Flange diameter: 138.7 mm; flange offset: 56.9 mm
- Wheel pilot diameter: 66.9 mm; brake pilot diameter: 67.9 mm; hub pilot diameter: 82.8 mm
- Bolt circle diameter: 114.3 mm / 4.5 in
- Rectangle flange shape for designated rear applications
Detailed Description
InMotion WA512523 is a rear wheel bearing and hub assembly designed for 2014-2018 Mazda 3 and 2014-2018 Mazda 3 Sport models in Standard Grade trim. The assembly is manufactured to match OE dimensions and application-specific measurements, helping ensure proper wheel mounting, bearing support, and ABS sensor integration. For buyers searching for a rear wheel hub assembly for Mazda 3, WA512523 provides a direct replacement option built around the original fitment requirements.
This part number, WA512523, is specified for rear position use and is built with a 5-stud, 4-bolt-hole flange layout, 114.3 mm bolt circle, and the listed pilot and flange dimensions. It is a practical choice when replacing a worn rear hub on a Mazda 3 or Mazda 3 Sport and when maintaining factory-style wheel and sensor geometry is important.
What It Helps Address
- Wheel bearing noise from a worn rear hub assembly
- ABS warning light concerns related to hub-mounted sensor function
- Wheel looseness or play caused by hub wear
- Uneven wheel mounting from damaged flange or pilot surfaces
- Vibration or roughness traced to rear hub deterioration
Installation Notes and Tips
Confirm rear-position fitment before installation and verify the vehicle is a 2014-2018 Mazda 3 or Mazda 3 Sport Standard Grade application. Compare the flange, pilot, stud, and bolt-circle dimensions to the removed part before pressing or bolting the assembly into place. Because the ABS sensor is included, inspect the connector routing and tone/sensor interface during installation to help avoid warning lights after service.
Quality Assurance
InMotion manufactures this hub assembly using high-precision processes and strict quality-control criteria. Each WA512523 unit is engineered from OE data and measurements to support proper fitment, performance, and service life in the designated rear applications.
Original: $107.90
-65%$107.90
$37.77InMotion WA512523 Wheel Bearing and Hub Assembly - Rear
Rear Wheel Hub Assembly for Mazda 3
InMotion WA512523 is a rear wheel bearing and hub assembly engineered for 2014-2018 Mazda 3 and Mazda 3 Sport Standard Grade applications. Built from OE data and measurements, it is made for direct replacement use where precise fitment, stable wheel support, and consistent sensor performance matter.
Key Features
- Direct replacement rear hub assembly for Mazda 3 and Mazda 3 Sport
- Engineered from OE data and dimensional measurements
- High-precision manufacturing with strict quality-control criteria
- Integrated ABS wheel speed sensor included
- 5 wheel studs with 4 flange bolt holes
- Flange diameter: 138.7 mm; flange offset: 56.9 mm
- Wheel pilot diameter: 66.9 mm; brake pilot diameter: 67.9 mm; hub pilot diameter: 82.8 mm
- Bolt circle diameter: 114.3 mm / 4.5 in
- Rectangle flange shape for designated rear applications
Detailed Description
InMotion WA512523 is a rear wheel bearing and hub assembly designed for 2014-2018 Mazda 3 and 2014-2018 Mazda 3 Sport models in Standard Grade trim. The assembly is manufactured to match OE dimensions and application-specific measurements, helping ensure proper wheel mounting, bearing support, and ABS sensor integration. For buyers searching for a rear wheel hub assembly for Mazda 3, WA512523 provides a direct replacement option built around the original fitment requirements.
This part number, WA512523, is specified for rear position use and is built with a 5-stud, 4-bolt-hole flange layout, 114.3 mm bolt circle, and the listed pilot and flange dimensions. It is a practical choice when replacing a worn rear hub on a Mazda 3 or Mazda 3 Sport and when maintaining factory-style wheel and sensor geometry is important.
What It Helps Address
- Wheel bearing noise from a worn rear hub assembly
- ABS warning light concerns related to hub-mounted sensor function
- Wheel looseness or play caused by hub wear
- Uneven wheel mounting from damaged flange or pilot surfaces
- Vibration or roughness traced to rear hub deterioration
Installation Notes and Tips
Confirm rear-position fitment before installation and verify the vehicle is a 2014-2018 Mazda 3 or Mazda 3 Sport Standard Grade application. Compare the flange, pilot, stud, and bolt-circle dimensions to the removed part before pressing or bolting the assembly into place. Because the ABS sensor is included, inspect the connector routing and tone/sensor interface during installation to help avoid warning lights after service.
Quality Assurance
InMotion manufactures this hub assembly using high-precision processes and strict quality-control criteria. Each WA512523 unit is engineered from OE data and measurements to support proper fitment, performance, and service life in the designated rear applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Wheel Hub Assembly for Mazda 3
InMotion WA512523 is a rear wheel bearing and hub assembly engineered for 2014-2018 Mazda 3 and Mazda 3 Sport Standard Grade applications. Built from OE data and measurements, it is made for direct replacement use where precise fitment, stable wheel support, and consistent sensor performance matter.
Key Features
- Direct replacement rear hub assembly for Mazda 3 and Mazda 3 Sport
- Engineered from OE data and dimensional measurements
- High-precision manufacturing with strict quality-control criteria
- Integrated ABS wheel speed sensor included
- 5 wheel studs with 4 flange bolt holes
- Flange diameter: 138.7 mm; flange offset: 56.9 mm
- Wheel pilot diameter: 66.9 mm; brake pilot diameter: 67.9 mm; hub pilot diameter: 82.8 mm
- Bolt circle diameter: 114.3 mm / 4.5 in
- Rectangle flange shape for designated rear applications
Detailed Description
InMotion WA512523 is a rear wheel bearing and hub assembly designed for 2014-2018 Mazda 3 and 2014-2018 Mazda 3 Sport models in Standard Grade trim. The assembly is manufactured to match OE dimensions and application-specific measurements, helping ensure proper wheel mounting, bearing support, and ABS sensor integration. For buyers searching for a rear wheel hub assembly for Mazda 3, WA512523 provides a direct replacement option built around the original fitment requirements.
This part number, WA512523, is specified for rear position use and is built with a 5-stud, 4-bolt-hole flange layout, 114.3 mm bolt circle, and the listed pilot and flange dimensions. It is a practical choice when replacing a worn rear hub on a Mazda 3 or Mazda 3 Sport and when maintaining factory-style wheel and sensor geometry is important.
What It Helps Address
- Wheel bearing noise from a worn rear hub assembly
- ABS warning light concerns related to hub-mounted sensor function
- Wheel looseness or play caused by hub wear
- Uneven wheel mounting from damaged flange or pilot surfaces
- Vibration or roughness traced to rear hub deterioration
Installation Notes and Tips
Confirm rear-position fitment before installation and verify the vehicle is a 2014-2018 Mazda 3 or Mazda 3 Sport Standard Grade application. Compare the flange, pilot, stud, and bolt-circle dimensions to the removed part before pressing or bolting the assembly into place. Because the ABS sensor is included, inspect the connector routing and tone/sensor interface during installation to help avoid warning lights after service.
Quality Assurance
InMotion manufactures this hub assembly using high-precision processes and strict quality-control criteria. Each WA512523 unit is engineered from OE data and measurements to support proper fitment, performance, and service life in the designated rear applications.
