Monroe 171667 Suspension Strut and Coil Spring Assembly - Front Right
Monroe Quick-Strut for Front Right Suspension
The Monroe Quick-Strut Complete Strut Assembly is built for direct replacement on select Chrysler and Dodge front right applications. Part number 171667 is a vehicle-specific assembly engineered to restore factory ride height and ride performance with a complete strut, mount, and coil spring design.
Monroe’s Quick-Strut line focuses on application-specific fitment and consistent suspension geometry. This assembly is fit checked and ride tested, and it is assembled in Paragould, Arkansas for the listed Chrysler 300M, Concorde, Intrepid, LHS, and Dodge Intrepid applications.
Key Features
- Vehicle-specific Quick-Strut Complete Strut Assembly
- Fits front right suspension positions on listed Chrysler and Dodge models
- Engineered to restore factory ride height and ride performance
- Gas charged design for suspension response
- Mounting hardware included
- Assembled in Paragould, AR
- Part number 171667 for direct catalog lookup
Detailed Product Overview
This Monroe Quick-Strut assembly combines the strut, strut mount, and coil spring into one service unit for select 1998-2004 Chrysler and Dodge vehicles. It is built around the original application requirements for the front right corner, with dimensions including an extended length of 17.375 inches, compressed length of 11.125 inches, body length of 10.625 inches, and travel length of 6.25 inches. The gas-charged construction supports controlled suspension movement, while the included parts pack helps match the OE-style service configuration. This part cross-references KYB SR4060 for the same application.
Vehicle Fitment
- Fits 1999-2004 Chrysler 300M, front right; without Performance Handling Package; includes strut, strut mount and coil spring.
- Fits 1998-2004 Chrysler Concorde, front right.
- Fits 1998-2004 Chrysler Intrepid, front right.
- Fits 1998-2004 Dodge Intrepid, front right; without Police Package.
- Fits 1999-2001 Chrysler LHS, front right.
Common Suspension Problems This Part Addresses
- Front-end sag from a worn coil spring or fatigued strut assembly
- Excessive bounce or reduced damping control
- Noisy suspension operation from worn upper mounting components
- Uneven ride height at the front right corner
- Restoration of OE-style suspension geometry after strut wear
Installation Notes
Verify vehicle trim and package exclusions before ordering, including the Performance Handling Package on Chrysler 300M and the Police Package on Dodge Intrepid. This assembly is intended for the front right position only and should be matched to the listed year, make, and model. Confirm the part number 171667 against the original unit and inspect adjacent suspension components during replacement.
Quality Assurance
Monroe Quick-Strut assemblies are fit checked and ride tested to support application-specific replacement needs. This product line is engineered to restore factory ride height and ride performance, and it is assembled in the USA for the listed applications.
Original: $93.57
-65%$93.57
$32.75Monroe 171667 Suspension Strut and Coil Spring Assembly - Front Right
Monroe Quick-Strut for Front Right Suspension
The Monroe Quick-Strut Complete Strut Assembly is built for direct replacement on select Chrysler and Dodge front right applications. Part number 171667 is a vehicle-specific assembly engineered to restore factory ride height and ride performance with a complete strut, mount, and coil spring design.
Monroe’s Quick-Strut line focuses on application-specific fitment and consistent suspension geometry. This assembly is fit checked and ride tested, and it is assembled in Paragould, Arkansas for the listed Chrysler 300M, Concorde, Intrepid, LHS, and Dodge Intrepid applications.
Key Features
- Vehicle-specific Quick-Strut Complete Strut Assembly
- Fits front right suspension positions on listed Chrysler and Dodge models
- Engineered to restore factory ride height and ride performance
- Gas charged design for suspension response
- Mounting hardware included
- Assembled in Paragould, AR
- Part number 171667 for direct catalog lookup
Detailed Product Overview
This Monroe Quick-Strut assembly combines the strut, strut mount, and coil spring into one service unit for select 1998-2004 Chrysler and Dodge vehicles. It is built around the original application requirements for the front right corner, with dimensions including an extended length of 17.375 inches, compressed length of 11.125 inches, body length of 10.625 inches, and travel length of 6.25 inches. The gas-charged construction supports controlled suspension movement, while the included parts pack helps match the OE-style service configuration. This part cross-references KYB SR4060 for the same application.
Vehicle Fitment
- Fits 1999-2004 Chrysler 300M, front right; without Performance Handling Package; includes strut, strut mount and coil spring.
- Fits 1998-2004 Chrysler Concorde, front right.
- Fits 1998-2004 Chrysler Intrepid, front right.
- Fits 1998-2004 Dodge Intrepid, front right; without Police Package.
- Fits 1999-2001 Chrysler LHS, front right.
Common Suspension Problems This Part Addresses
- Front-end sag from a worn coil spring or fatigued strut assembly
- Excessive bounce or reduced damping control
- Noisy suspension operation from worn upper mounting components
- Uneven ride height at the front right corner
- Restoration of OE-style suspension geometry after strut wear
Installation Notes
Verify vehicle trim and package exclusions before ordering, including the Performance Handling Package on Chrysler 300M and the Police Package on Dodge Intrepid. This assembly is intended for the front right position only and should be matched to the listed year, make, and model. Confirm the part number 171667 against the original unit and inspect adjacent suspension components during replacement.
Quality Assurance
Monroe Quick-Strut assemblies are fit checked and ride tested to support application-specific replacement needs. This product line is engineered to restore factory ride height and ride performance, and it is assembled in the USA for the listed applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Monroe Quick-Strut for Front Right Suspension
The Monroe Quick-Strut Complete Strut Assembly is built for direct replacement on select Chrysler and Dodge front right applications. Part number 171667 is a vehicle-specific assembly engineered to restore factory ride height and ride performance with a complete strut, mount, and coil spring design.
Monroe’s Quick-Strut line focuses on application-specific fitment and consistent suspension geometry. This assembly is fit checked and ride tested, and it is assembled in Paragould, Arkansas for the listed Chrysler 300M, Concorde, Intrepid, LHS, and Dodge Intrepid applications.
Key Features
- Vehicle-specific Quick-Strut Complete Strut Assembly
- Fits front right suspension positions on listed Chrysler and Dodge models
- Engineered to restore factory ride height and ride performance
- Gas charged design for suspension response
- Mounting hardware included
- Assembled in Paragould, AR
- Part number 171667 for direct catalog lookup
Detailed Product Overview
This Monroe Quick-Strut assembly combines the strut, strut mount, and coil spring into one service unit for select 1998-2004 Chrysler and Dodge vehicles. It is built around the original application requirements for the front right corner, with dimensions including an extended length of 17.375 inches, compressed length of 11.125 inches, body length of 10.625 inches, and travel length of 6.25 inches. The gas-charged construction supports controlled suspension movement, while the included parts pack helps match the OE-style service configuration. This part cross-references KYB SR4060 for the same application.
Vehicle Fitment
- Fits 1999-2004 Chrysler 300M, front right; without Performance Handling Package; includes strut, strut mount and coil spring.
- Fits 1998-2004 Chrysler Concorde, front right.
- Fits 1998-2004 Chrysler Intrepid, front right.
- Fits 1998-2004 Dodge Intrepid, front right; without Police Package.
- Fits 1999-2001 Chrysler LHS, front right.
Common Suspension Problems This Part Addresses
- Front-end sag from a worn coil spring or fatigued strut assembly
- Excessive bounce or reduced damping control
- Noisy suspension operation from worn upper mounting components
- Uneven ride height at the front right corner
- Restoration of OE-style suspension geometry after strut wear
Installation Notes
Verify vehicle trim and package exclusions before ordering, including the Performance Handling Package on Chrysler 300M and the Police Package on Dodge Intrepid. This assembly is intended for the front right position only and should be matched to the listed year, make, and model. Confirm the part number 171667 against the original unit and inspect adjacent suspension components during replacement.
Quality Assurance
Monroe Quick-Strut assemblies are fit checked and ride tested to support application-specific replacement needs. This product line is engineered to restore factory ride height and ride performance, and it is assembled in the USA for the listed applications.
