Monroe 65484 Suspension Shock Absorber - Rear
Monroe Magnum Shock Absorber 65484 Overview
The Monroe Magnum Shock Absorber 65484 is a heavy-duty suspension shock absorber for Class 6-8 vehicles. It uses a gas-charged design with a large-bore piston to deliver quick response and steady damping in demanding truck suspension systems.
Built for air spring and taper leaf suspensions, this Monroe Magnum shock absorber 65484 supports consistent control in high-mileage service. It is a direct-fit suspension shock absorber choice for commercial truck applications where stable ride control matters.
Key Features
- Gas-charged design for fast suspension response
- Large-bore piston engineered for severe-duty use
- Metal dust shield helps protect the shock assembly
- Extended hydraulic lockout included in the design
- Loop bushing and sleeve mounts at both ends
- Extended length: 30 in.; compressed length: 18.12 in.; travel length: 11.88 in.
- Compatible with air spring and taper leaf suspension setups
Product Details
Monroe’s Magnum Shock Absorber line is built for heavy truck suspension demands, with a focus on response, control, and durability under load. Part number 65484 uses nitrogen gas pressure and an extra-large piston bore to help maintain consistent damping over rough roads, frequent stops, and extended service intervals. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For buyers searching for a Monroe Magnum shock absorber 65484, heavy-duty truck shock absorber, or gas-charged suspension shock absorber for Class 6-8 vehicles, this part is built around the needs of commercial-duty suspension systems. It is also a relevant replacement when searching for Monroe Magnum 65484 for truck suspension service.
What It Helps Address
- Excessive bounce or rebound in heavy truck suspension systems
- Reduced damping control on worn air spring or taper leaf setups
- Harsh ride behavior from high-mileage suspension use
- Inconsistent shock response under severe-duty operation
- Need for a direct replacement shock absorber with loop mounts
Installation Notes
Verify extended length, compressed length, and travel length before installation to confirm suspension clearance. Check that the upper and lower loop bushing and sleeve mounts match the vehicle’s mounting points, including the 3/4 in. sleeve ID and 1.3/4 in. sleeve OAL specification. Confirm the suspension type and inspect related bushings and mounting hardware condition before replacing the shock.
Compatible With commercial truck applications using Monroe Magnum Shock Absorber 65484 specifications, including Class 6-8 vehicles with air spring and taper leaf suspensions. Search terms such as Monroe 65484 shock absorber and heavy-duty truck suspension shock absorber are commonly used for this part.
Quality Assurance
Monroe Magnum shocks are engineered for severe-duty commercial use with a gas-charged, large-bore construction intended to deliver consistent control in demanding suspension environments. Part number 65484 is built to Monroe’s heavy-truck application standards for service reliability.
Monroe 65484 Suspension Shock Absorber - Rear
Monroe Magnum Shock Absorber 65484 Overview
The Monroe Magnum Shock Absorber 65484 is a heavy-duty suspension shock absorber for Class 6-8 vehicles. It uses a gas-charged design with a large-bore piston to deliver quick response and steady damping in demanding truck suspension systems.
Built for air spring and taper leaf suspensions, this Monroe Magnum shock absorber 65484 supports consistent control in high-mileage service. It is a direct-fit suspension shock absorber choice for commercial truck applications where stable ride control matters.
Key Features
- Gas-charged design for fast suspension response
- Large-bore piston engineered for severe-duty use
- Metal dust shield helps protect the shock assembly
- Extended hydraulic lockout included in the design
- Loop bushing and sleeve mounts at both ends
- Extended length: 30 in.; compressed length: 18.12 in.; travel length: 11.88 in.
- Compatible with air spring and taper leaf suspension setups
Product Details
Monroe’s Magnum Shock Absorber line is built for heavy truck suspension demands, with a focus on response, control, and durability under load. Part number 65484 uses nitrogen gas pressure and an extra-large piston bore to help maintain consistent damping over rough roads, frequent stops, and extended service intervals. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For buyers searching for a Monroe Magnum shock absorber 65484, heavy-duty truck shock absorber, or gas-charged suspension shock absorber for Class 6-8 vehicles, this part is built around the needs of commercial-duty suspension systems. It is also a relevant replacement when searching for Monroe Magnum 65484 for truck suspension service.
What It Helps Address
- Excessive bounce or rebound in heavy truck suspension systems
- Reduced damping control on worn air spring or taper leaf setups
- Harsh ride behavior from high-mileage suspension use
- Inconsistent shock response under severe-duty operation
- Need for a direct replacement shock absorber with loop mounts
Installation Notes
Verify extended length, compressed length, and travel length before installation to confirm suspension clearance. Check that the upper and lower loop bushing and sleeve mounts match the vehicle’s mounting points, including the 3/4 in. sleeve ID and 1.3/4 in. sleeve OAL specification. Confirm the suspension type and inspect related bushings and mounting hardware condition before replacing the shock.
Compatible With commercial truck applications using Monroe Magnum Shock Absorber 65484 specifications, including Class 6-8 vehicles with air spring and taper leaf suspensions. Search terms such as Monroe 65484 shock absorber and heavy-duty truck suspension shock absorber are commonly used for this part.
Quality Assurance
Monroe Magnum shocks are engineered for severe-duty commercial use with a gas-charged, large-bore construction intended to deliver consistent control in demanding suspension environments. Part number 65484 is built to Monroe’s heavy-truck application standards for service reliability.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Monroe Magnum Shock Absorber 65484 Overview
The Monroe Magnum Shock Absorber 65484 is a heavy-duty suspension shock absorber for Class 6-8 vehicles. It uses a gas-charged design with a large-bore piston to deliver quick response and steady damping in demanding truck suspension systems.
Built for air spring and taper leaf suspensions, this Monroe Magnum shock absorber 65484 supports consistent control in high-mileage service. It is a direct-fit suspension shock absorber choice for commercial truck applications where stable ride control matters.
Key Features
- Gas-charged design for fast suspension response
- Large-bore piston engineered for severe-duty use
- Metal dust shield helps protect the shock assembly
- Extended hydraulic lockout included in the design
- Loop bushing and sleeve mounts at both ends
- Extended length: 30 in.; compressed length: 18.12 in.; travel length: 11.88 in.
- Compatible with air spring and taper leaf suspension setups
Product Details
Monroe’s Magnum Shock Absorber line is built for heavy truck suspension demands, with a focus on response, control, and durability under load. Part number 65484 uses nitrogen gas pressure and an extra-large piston bore to help maintain consistent damping over rough roads, frequent stops, and extended service intervals. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For buyers searching for a Monroe Magnum shock absorber 65484, heavy-duty truck shock absorber, or gas-charged suspension shock absorber for Class 6-8 vehicles, this part is built around the needs of commercial-duty suspension systems. It is also a relevant replacement when searching for Monroe Magnum 65484 for truck suspension service.
What It Helps Address
- Excessive bounce or rebound in heavy truck suspension systems
- Reduced damping control on worn air spring or taper leaf setups
- Harsh ride behavior from high-mileage suspension use
- Inconsistent shock response under severe-duty operation
- Need for a direct replacement shock absorber with loop mounts
Installation Notes
Verify extended length, compressed length, and travel length before installation to confirm suspension clearance. Check that the upper and lower loop bushing and sleeve mounts match the vehicle’s mounting points, including the 3/4 in. sleeve ID and 1.3/4 in. sleeve OAL specification. Confirm the suspension type and inspect related bushings and mounting hardware condition before replacing the shock.
Compatible With commercial truck applications using Monroe Magnum Shock Absorber 65484 specifications, including Class 6-8 vehicles with air spring and taper leaf suspensions. Search terms such as Monroe 65484 shock absorber and heavy-duty truck suspension shock absorber are commonly used for this part.
Quality Assurance
Monroe Magnum shocks are engineered for severe-duty commercial use with a gas-charged, large-bore construction intended to deliver consistent control in demanding suspension environments. Part number 65484 is built to Monroe’s heavy-truck application standards for service reliability.
