Mopar 52853432AA Drive Shaft - Rear
Mopar Rear Drive Shaft for Jeep 4WD
This Mopar drive shaft, part number 52853432AA, is a direct-fit driveline component for select Jeep 4WD applications. It is built for rear axle driveline service on Commander and Grand Cherokee models equipped with Quadra-Trac Active On Demand 4WD or Quadra-Trac I Full-Time 4WD.
Key Features
- Genuine Mopar drive shaft for rear driveline service
- Part number 52853432AA for accurate ordering and fitment lookup
- Fits 2007-2010 Jeep Commander, rear
- Fits 2007-2010 Jeep Grand Cherokee, rear
- Application-specific for Quadra-Trac Active On Demand 4WD and Quadra-Trac I Full-Time 4WD
Detailed Description
Use this rear drive shaft when servicing the driveline on a Jeep Commander or Jeep Grand Cherokee with the listed 4WD systems. Mopar 52853432AA is specified for 2007-2010 Jeep Commander rear and 2007-2010 Jeep Grand Cherokee rear applications, making it a focused replacement for vehicles that require the correct rear shaft configuration. If you are searching for a rear drive shaft for 2007-2010 Jeep Grand Cherokee Quadra-Trac I Full-Time 4WD or a rear drive shaft for 2007-2010 Jeep Commander Quadra-Trac Active On Demand 4WD, this part number is the relevant OE reference.
This part cross-references no additional part numbers in the provided data.
What It Helps Address
- Vibration from a worn rear drive shaft
- Clunking or driveline noise during acceleration or deceleration
- Loss of smooth power transfer to the rear axle
- Driveline service needs on Quadra-Trac-equipped Jeep 4WD models
- Replacement of a damaged or worn OE rear shaft assembly
Installation Notes and Tips
Confirm the vehicle’s 4WD system and rear position before ordering. This part is listed for rear installation only and for the specific Quadra-Trac Active On Demand 4WD and Quadra-Trac I Full-Time 4WD configurations shown in the fitment data. Verify the part number 52853432AA against the original shaft before installation to ensure the correct application for your Jeep Commander or Jeep Grand Cherokee.
Quality Assurance
Mopar OE parts are built to match factory application requirements for Chrysler, Dodge, Jeep, and Ram vehicles. For buyers comparing Jeep Commander and Jeep Grand Cherokee driveline parts, Mopar 52853432AA provides an OE-referenced solution for the listed rear-drive applications.
Original: $593.82
-65%$593.82
$207.84Mopar 52853432AA Drive Shaft - Rear
Mopar Rear Drive Shaft for Jeep 4WD
This Mopar drive shaft, part number 52853432AA, is a direct-fit driveline component for select Jeep 4WD applications. It is built for rear axle driveline service on Commander and Grand Cherokee models equipped with Quadra-Trac Active On Demand 4WD or Quadra-Trac I Full-Time 4WD.
Key Features
- Genuine Mopar drive shaft for rear driveline service
- Part number 52853432AA for accurate ordering and fitment lookup
- Fits 2007-2010 Jeep Commander, rear
- Fits 2007-2010 Jeep Grand Cherokee, rear
- Application-specific for Quadra-Trac Active On Demand 4WD and Quadra-Trac I Full-Time 4WD
Detailed Description
Use this rear drive shaft when servicing the driveline on a Jeep Commander or Jeep Grand Cherokee with the listed 4WD systems. Mopar 52853432AA is specified for 2007-2010 Jeep Commander rear and 2007-2010 Jeep Grand Cherokee rear applications, making it a focused replacement for vehicles that require the correct rear shaft configuration. If you are searching for a rear drive shaft for 2007-2010 Jeep Grand Cherokee Quadra-Trac I Full-Time 4WD or a rear drive shaft for 2007-2010 Jeep Commander Quadra-Trac Active On Demand 4WD, this part number is the relevant OE reference.
This part cross-references no additional part numbers in the provided data.
What It Helps Address
- Vibration from a worn rear drive shaft
- Clunking or driveline noise during acceleration or deceleration
- Loss of smooth power transfer to the rear axle
- Driveline service needs on Quadra-Trac-equipped Jeep 4WD models
- Replacement of a damaged or worn OE rear shaft assembly
Installation Notes and Tips
Confirm the vehicle’s 4WD system and rear position before ordering. This part is listed for rear installation only and for the specific Quadra-Trac Active On Demand 4WD and Quadra-Trac I Full-Time 4WD configurations shown in the fitment data. Verify the part number 52853432AA against the original shaft before installation to ensure the correct application for your Jeep Commander or Jeep Grand Cherokee.
Quality Assurance
Mopar OE parts are built to match factory application requirements for Chrysler, Dodge, Jeep, and Ram vehicles. For buyers comparing Jeep Commander and Jeep Grand Cherokee driveline parts, Mopar 52853432AA provides an OE-referenced solution for the listed rear-drive applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Mopar Rear Drive Shaft for Jeep 4WD
This Mopar drive shaft, part number 52853432AA, is a direct-fit driveline component for select Jeep 4WD applications. It is built for rear axle driveline service on Commander and Grand Cherokee models equipped with Quadra-Trac Active On Demand 4WD or Quadra-Trac I Full-Time 4WD.
Key Features
- Genuine Mopar drive shaft for rear driveline service
- Part number 52853432AA for accurate ordering and fitment lookup
- Fits 2007-2010 Jeep Commander, rear
- Fits 2007-2010 Jeep Grand Cherokee, rear
- Application-specific for Quadra-Trac Active On Demand 4WD and Quadra-Trac I Full-Time 4WD
Detailed Description
Use this rear drive shaft when servicing the driveline on a Jeep Commander or Jeep Grand Cherokee with the listed 4WD systems. Mopar 52853432AA is specified for 2007-2010 Jeep Commander rear and 2007-2010 Jeep Grand Cherokee rear applications, making it a focused replacement for vehicles that require the correct rear shaft configuration. If you are searching for a rear drive shaft for 2007-2010 Jeep Grand Cherokee Quadra-Trac I Full-Time 4WD or a rear drive shaft for 2007-2010 Jeep Commander Quadra-Trac Active On Demand 4WD, this part number is the relevant OE reference.
This part cross-references no additional part numbers in the provided data.
What It Helps Address
- Vibration from a worn rear drive shaft
- Clunking or driveline noise during acceleration or deceleration
- Loss of smooth power transfer to the rear axle
- Driveline service needs on Quadra-Trac-equipped Jeep 4WD models
- Replacement of a damaged or worn OE rear shaft assembly
Installation Notes and Tips
Confirm the vehicle’s 4WD system and rear position before ordering. This part is listed for rear installation only and for the specific Quadra-Trac Active On Demand 4WD and Quadra-Trac I Full-Time 4WD configurations shown in the fitment data. Verify the part number 52853432AA against the original shaft before installation to ensure the correct application for your Jeep Commander or Jeep Grand Cherokee.
Quality Assurance
Mopar OE parts are built to match factory application requirements for Chrysler, Dodge, Jeep, and Ram vehicles. For buyers comparing Jeep Commander and Jeep Grand Cherokee driveline parts, Mopar 52853432AA provides an OE-referenced solution for the listed rear-drive applications.
