MPA Electrical 1003-1179M Disc Brake Pad Set - Front
Front Brake Pads for Mazda MX-5 and MX-5 Miata
MPA Electrical Quality-Built Black Series Semi-Metallic Brake Pads w/ Hardware, part number 1003-1179M, are built for front brake service on select Mazda MX-5 and MX-5 Miata models. This front disc brake pad set uses a semi-metallic friction formula with molded attachment, pad shims, adhesive-backed shims, and abutment clips for consistent pedal response and controlled braking.
The Black Series product line focuses on application-specific friction compounds that help deliver even braking feel across a wide temperature range. For drivers searching for Mazda MX-5 front brake pads or Mazda MX-5 Miata semi-metallic brake pads, 1003-1179M provides a direct-fit service part for the listed applications.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Front disc brake pad set for listed Mazda MX-5 and MX-5 Miata applications
- Pad shims included for noise control and fit consistency
- Adhesive-backed pad shim included
- Abutment clips included
- Integrally molded friction material attachment
- Regular grade replacement part, new condition
- Part number 1003-1179M for ordering and fitment verification
Product Details
MPA Electrical Black Series brake pads are engineered for smooth, predictable braking with low dust and reduced noise characteristics. The semi-metallic compound is selected to support stable pedal feel and fade resistance during everyday driving, while the application-specific formulation helps simplify pad selection for the correct Mazda MX-5 front brake service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Part Helps Address
- Front brake pad wear on Mazda MX-5 and MX-5 Miata models
- Brake noise caused by worn or uneven pad friction surfaces
- Reduced braking consistency from aged front pads
- Dust buildup associated with deteriorated brake pad material
- Pedal feel changes from worn disc brake pads
Installation Notes and Tips
Fits 2009-2015 Mazda MX-5, front. Fits 2006-2015 Mazda MX-5 Miata, front. Fits 2006-2008 Mazda MX-5, front. Confirm rotor condition, caliper operation, and pad hardware condition before installation. Clean the caliper bracket contact points, apply brake lubricant only where specified by the vehicle service procedure, and follow the manufacturer’s bedding-in process after installation. Verify part number 1003-1179M against the vehicle’s front brake configuration before service.
Quality Assurance
MPA Electrical Black Series brake pads are built as new replacement components using a semi-metallic friction compound and included shims and clips for the listed applications. The Black Series line is formulated for consistent brake system performance and reliable stopping characteristics across a broad thermal range.
Original: $29.38
-65%$29.38
$10.28MPA Electrical 1003-1179M Disc Brake Pad Set - Front
Front Brake Pads for Mazda MX-5 and MX-5 Miata
MPA Electrical Quality-Built Black Series Semi-Metallic Brake Pads w/ Hardware, part number 1003-1179M, are built for front brake service on select Mazda MX-5 and MX-5 Miata models. This front disc brake pad set uses a semi-metallic friction formula with molded attachment, pad shims, adhesive-backed shims, and abutment clips for consistent pedal response and controlled braking.
The Black Series product line focuses on application-specific friction compounds that help deliver even braking feel across a wide temperature range. For drivers searching for Mazda MX-5 front brake pads or Mazda MX-5 Miata semi-metallic brake pads, 1003-1179M provides a direct-fit service part for the listed applications.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Front disc brake pad set for listed Mazda MX-5 and MX-5 Miata applications
- Pad shims included for noise control and fit consistency
- Adhesive-backed pad shim included
- Abutment clips included
- Integrally molded friction material attachment
- Regular grade replacement part, new condition
- Part number 1003-1179M for ordering and fitment verification
Product Details
MPA Electrical Black Series brake pads are engineered for smooth, predictable braking with low dust and reduced noise characteristics. The semi-metallic compound is selected to support stable pedal feel and fade resistance during everyday driving, while the application-specific formulation helps simplify pad selection for the correct Mazda MX-5 front brake service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Part Helps Address
- Front brake pad wear on Mazda MX-5 and MX-5 Miata models
- Brake noise caused by worn or uneven pad friction surfaces
- Reduced braking consistency from aged front pads
- Dust buildup associated with deteriorated brake pad material
- Pedal feel changes from worn disc brake pads
Installation Notes and Tips
Fits 2009-2015 Mazda MX-5, front. Fits 2006-2015 Mazda MX-5 Miata, front. Fits 2006-2008 Mazda MX-5, front. Confirm rotor condition, caliper operation, and pad hardware condition before installation. Clean the caliper bracket contact points, apply brake lubricant only where specified by the vehicle service procedure, and follow the manufacturer’s bedding-in process after installation. Verify part number 1003-1179M against the vehicle’s front brake configuration before service.
Quality Assurance
MPA Electrical Black Series brake pads are built as new replacement components using a semi-metallic friction compound and included shims and clips for the listed applications. The Black Series line is formulated for consistent brake system performance and reliable stopping characteristics across a broad thermal range.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Mazda MX-5 and MX-5 Miata
MPA Electrical Quality-Built Black Series Semi-Metallic Brake Pads w/ Hardware, part number 1003-1179M, are built for front brake service on select Mazda MX-5 and MX-5 Miata models. This front disc brake pad set uses a semi-metallic friction formula with molded attachment, pad shims, adhesive-backed shims, and abutment clips for consistent pedal response and controlled braking.
The Black Series product line focuses on application-specific friction compounds that help deliver even braking feel across a wide temperature range. For drivers searching for Mazda MX-5 front brake pads or Mazda MX-5 Miata semi-metallic brake pads, 1003-1179M provides a direct-fit service part for the listed applications.
Key Features
- Semi-metallic friction material for dependable stopping performance
- Front disc brake pad set for listed Mazda MX-5 and MX-5 Miata applications
- Pad shims included for noise control and fit consistency
- Adhesive-backed pad shim included
- Abutment clips included
- Integrally molded friction material attachment
- Regular grade replacement part, new condition
- Part number 1003-1179M for ordering and fitment verification
Product Details
MPA Electrical Black Series brake pads are engineered for smooth, predictable braking with low dust and reduced noise characteristics. The semi-metallic compound is selected to support stable pedal feel and fade resistance during everyday driving, while the application-specific formulation helps simplify pad selection for the correct Mazda MX-5 front brake service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Part Helps Address
- Front brake pad wear on Mazda MX-5 and MX-5 Miata models
- Brake noise caused by worn or uneven pad friction surfaces
- Reduced braking consistency from aged front pads
- Dust buildup associated with deteriorated brake pad material
- Pedal feel changes from worn disc brake pads
Installation Notes and Tips
Fits 2009-2015 Mazda MX-5, front. Fits 2006-2015 Mazda MX-5 Miata, front. Fits 2006-2008 Mazda MX-5, front. Confirm rotor condition, caliper operation, and pad hardware condition before installation. Clean the caliper bracket contact points, apply brake lubricant only where specified by the vehicle service procedure, and follow the manufacturer’s bedding-in process after installation. Verify part number 1003-1179M against the vehicle’s front brake configuration before service.
Quality Assurance
MPA Electrical Black Series brake pads are built as new replacement components using a semi-metallic friction compound and included shims and clips for the listed applications. The Black Series line is formulated for consistent brake system performance and reliable stopping characteristics across a broad thermal range.
