MPA Electrical M36706 Brake Master Cylinder
Brake Master Cylinder for Classic Chrysler and Dodge
The MPA Electrical M36706 is a remanufactured brake master cylinder built for classic Chrysler and Dodge vehicles with front drum brakes. It is a standard replacement unit with an integral reservoir, cast iron construction, and a 1-inch bore for restoring hydraulic brake performance.
Key Features
- Remanufactured brake master cylinder for brake hydraulics service
- Integral reservoir with included master cylinder cap
- Cast iron master cylinder body for OE-style fit and function
- 1-inch bore diameter
- Standard replacement grade
- Four mounting holes with 0.35-inch mounting hole diameter
- Brake booster, push rod, gasket, seal, sensor, and pressure switch not included
Product Details
MPA Electrical M36706 is part of the brand’s reman with front drum brakes line, built for vehicles that use a front drum brake configuration. Using OE sample references and controlled testing against OE specifications, this brake master cylinder is remanufactured to deliver consistent hydraulic performance right out of the box. It is a direct-fit style replacement for classic Chrysler Imperial, New Yorker, Newport, Town & Country, and Dodge Charger, Dart, Monaco, and Lancer applications listed below. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Low or inconsistent brake pedal response
- Internal master cylinder leakage
- Brake fluid loss at the hydraulic unit
- Soft or sinking pedal feel caused by master cylinder wear
- Reduced braking performance in front drum brake systems
Installation Notes and Tips
- Verify front drum brake configuration before ordering.
- Inspect the brake booster, push rod, and hydraulic lines during replacement.
- Bench bleeding is recommended before installation to help remove trapped air.
- Confirm mounting hole alignment and bore size match the original unit.
- Use fresh brake fluid and check the entire system for leaks after installation.
Quality Assurance
Each MPA Electrical M36706 remanufactured master cylinder is tested against OE specifications using proprietary processes and strict protocols to help ensure consistent braking performance. The unit is built as a standard replacement for classic Chrysler and Dodge brake service.
Compatible Vehicles
- Fits 1963-1966 Chrysler Imperial, N/A, Reman with front drum brakes
- Fits 1963-1966 Chrysler New Yorker, N/A, Reman with front drum brakes
- Fits 1965-1966 Chrysler Newport, N/A, Reman with front drum brakes
- Fits 1963-1966 Chrysler Town & Country, N/A, Reman with front drum brakes
- Fits 1966 Dodge Charger, N/A, Reman with front drum brakes
- Fits 1962-1966 Dodge Dart, N/A, Reman with front drum brakes
- Fits 1965-1966 Dodge Monaco, N/A, Reman with front drum brakes
- Fits 1961-1962 Dodge Lancer, N/A, Reman with front drum brakes
MPA Electrical M36706 Brake Master Cylinder
Brake Master Cylinder for Classic Chrysler and Dodge
The MPA Electrical M36706 is a remanufactured brake master cylinder built for classic Chrysler and Dodge vehicles with front drum brakes. It is a standard replacement unit with an integral reservoir, cast iron construction, and a 1-inch bore for restoring hydraulic brake performance.
Key Features
- Remanufactured brake master cylinder for brake hydraulics service
- Integral reservoir with included master cylinder cap
- Cast iron master cylinder body for OE-style fit and function
- 1-inch bore diameter
- Standard replacement grade
- Four mounting holes with 0.35-inch mounting hole diameter
- Brake booster, push rod, gasket, seal, sensor, and pressure switch not included
Product Details
MPA Electrical M36706 is part of the brand’s reman with front drum brakes line, built for vehicles that use a front drum brake configuration. Using OE sample references and controlled testing against OE specifications, this brake master cylinder is remanufactured to deliver consistent hydraulic performance right out of the box. It is a direct-fit style replacement for classic Chrysler Imperial, New Yorker, Newport, Town & Country, and Dodge Charger, Dart, Monaco, and Lancer applications listed below. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Low or inconsistent brake pedal response
- Internal master cylinder leakage
- Brake fluid loss at the hydraulic unit
- Soft or sinking pedal feel caused by master cylinder wear
- Reduced braking performance in front drum brake systems
Installation Notes and Tips
- Verify front drum brake configuration before ordering.
- Inspect the brake booster, push rod, and hydraulic lines during replacement.
- Bench bleeding is recommended before installation to help remove trapped air.
- Confirm mounting hole alignment and bore size match the original unit.
- Use fresh brake fluid and check the entire system for leaks after installation.
Quality Assurance
Each MPA Electrical M36706 remanufactured master cylinder is tested against OE specifications using proprietary processes and strict protocols to help ensure consistent braking performance. The unit is built as a standard replacement for classic Chrysler and Dodge brake service.
Compatible Vehicles
- Fits 1963-1966 Chrysler Imperial, N/A, Reman with front drum brakes
- Fits 1963-1966 Chrysler New Yorker, N/A, Reman with front drum brakes
- Fits 1965-1966 Chrysler Newport, N/A, Reman with front drum brakes
- Fits 1963-1966 Chrysler Town & Country, N/A, Reman with front drum brakes
- Fits 1966 Dodge Charger, N/A, Reman with front drum brakes
- Fits 1962-1966 Dodge Dart, N/A, Reman with front drum brakes
- Fits 1965-1966 Dodge Monaco, N/A, Reman with front drum brakes
- Fits 1961-1962 Dodge Lancer, N/A, Reman with front drum brakes
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Master Cylinder for Classic Chrysler and Dodge
The MPA Electrical M36706 is a remanufactured brake master cylinder built for classic Chrysler and Dodge vehicles with front drum brakes. It is a standard replacement unit with an integral reservoir, cast iron construction, and a 1-inch bore for restoring hydraulic brake performance.
Key Features
- Remanufactured brake master cylinder for brake hydraulics service
- Integral reservoir with included master cylinder cap
- Cast iron master cylinder body for OE-style fit and function
- 1-inch bore diameter
- Standard replacement grade
- Four mounting holes with 0.35-inch mounting hole diameter
- Brake booster, push rod, gasket, seal, sensor, and pressure switch not included
Product Details
MPA Electrical M36706 is part of the brand’s reman with front drum brakes line, built for vehicles that use a front drum brake configuration. Using OE sample references and controlled testing against OE specifications, this brake master cylinder is remanufactured to deliver consistent hydraulic performance right out of the box. It is a direct-fit style replacement for classic Chrysler Imperial, New Yorker, Newport, Town & Country, and Dodge Charger, Dart, Monaco, and Lancer applications listed below. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Low or inconsistent brake pedal response
- Internal master cylinder leakage
- Brake fluid loss at the hydraulic unit
- Soft or sinking pedal feel caused by master cylinder wear
- Reduced braking performance in front drum brake systems
Installation Notes and Tips
- Verify front drum brake configuration before ordering.
- Inspect the brake booster, push rod, and hydraulic lines during replacement.
- Bench bleeding is recommended before installation to help remove trapped air.
- Confirm mounting hole alignment and bore size match the original unit.
- Use fresh brake fluid and check the entire system for leaks after installation.
Quality Assurance
Each MPA Electrical M36706 remanufactured master cylinder is tested against OE specifications using proprietary processes and strict protocols to help ensure consistent braking performance. The unit is built as a standard replacement for classic Chrysler and Dodge brake service.
Compatible Vehicles
- Fits 1963-1966 Chrysler Imperial, N/A, Reman with front drum brakes
- Fits 1963-1966 Chrysler New Yorker, N/A, Reman with front drum brakes
- Fits 1965-1966 Chrysler Newport, N/A, Reman with front drum brakes
- Fits 1963-1966 Chrysler Town & Country, N/A, Reman with front drum brakes
- Fits 1966 Dodge Charger, N/A, Reman with front drum brakes
- Fits 1962-1966 Dodge Dart, N/A, Reman with front drum brakes
- Fits 1965-1966 Dodge Monaco, N/A, Reman with front drum brakes
- Fits 1961-1962 Dodge Lancer, N/A, Reman with front drum brakes
