MPA Electrical NM55227 Brake Master Cylinder
Brake Master Cylinder for Toyota and Lexus
Restore braking response with this new brake master cylinder from MPA Electrical. Part number NM55227 is a standard replacement unit built with an aluminum body, integrated reservoir, and cap for select Toyota and Lexus vehicles with front disc brakes.
Compatible with 2000-2003 Toyota Solara, 2001 Lexus ES300, and 2000-2001 Toyota Camry, this master cylinder is engineered to match OE specifications using tested manufacturing processes for consistent pedal feel and hydraulic performance.
Key Features
- Brand: MPA Electrical
- Part number: NM55227
- Standard replacement brake master cylinder
- Aluminum master cylinder construction
- 0.9375 in. bore diameter
- Reservoir and master cylinder cap included
- Gasket or seal included
- Uses DOT 3 brake fluid
- Two mounting holes
- New condition
Product Details
MPA Electrical NM55227 is part of the brand’s New with front disc brakes line, focused on direct-fit brake hydraulic components for vehicles equipped with front disc brake systems. This master cylinder is built for 2000-2003 Toyota Solara, 2001 Lexus ES300, and 2000-2001 Toyota Camry applications, making it a targeted choice for drivers replacing a worn or leaking hydraulic unit. This part cross-references Toyota/Lexus OE numbers 4720133180 and 4720133210 for the same application.
The aluminum housing, 0.9375-inch bore, and included reservoir support proper hydraulic pressure transfer from the brake pedal to the brake system. Because the unit is supplied new and tested against OE specifications, it is suited for restoring brake pedal response after internal seal wear, fluid bypass, or corrosion-related failure. Part number NM55227 is a direct replacement option for Toyota Camry, Toyota Solara, and Lexus ES300 brake hydraulic service.
Common Problems This Part Can Address
- Low or sinking brake pedal feel
- Brake fluid leakage at the master cylinder
- Internal seal wear causing pressure loss
- Uneven or inconsistent hydraulic brake response
- Brake warning symptoms related to master cylinder failure
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and front disc brake configuration before installation. Bench bleed the master cylinder before connecting brake lines, then bleed the full brake system with DOT 3 fluid after installation. Inspect the brake booster, lines, and fittings for wear or contamination while servicing the hydraulic system. Mounting hardware, push rod, brake booster, and brake pressure switch are not included.
Quality Assurance
MPA Electrical tests each unit using OE sample references and controlled inspection processes to help ensure the master cylinder meets specification requirements before it leaves the factory. NM55227 is a new standard replacement brake master cylinder built for consistent hydraulic performance in the listed Toyota and Lexus applications.
Original: $134.55
-65%$134.55
$47.09MPA Electrical NM55227 Brake Master Cylinder
Brake Master Cylinder for Toyota and Lexus
Restore braking response with this new brake master cylinder from MPA Electrical. Part number NM55227 is a standard replacement unit built with an aluminum body, integrated reservoir, and cap for select Toyota and Lexus vehicles with front disc brakes.
Compatible with 2000-2003 Toyota Solara, 2001 Lexus ES300, and 2000-2001 Toyota Camry, this master cylinder is engineered to match OE specifications using tested manufacturing processes for consistent pedal feel and hydraulic performance.
Key Features
- Brand: MPA Electrical
- Part number: NM55227
- Standard replacement brake master cylinder
- Aluminum master cylinder construction
- 0.9375 in. bore diameter
- Reservoir and master cylinder cap included
- Gasket or seal included
- Uses DOT 3 brake fluid
- Two mounting holes
- New condition
Product Details
MPA Electrical NM55227 is part of the brand’s New with front disc brakes line, focused on direct-fit brake hydraulic components for vehicles equipped with front disc brake systems. This master cylinder is built for 2000-2003 Toyota Solara, 2001 Lexus ES300, and 2000-2001 Toyota Camry applications, making it a targeted choice for drivers replacing a worn or leaking hydraulic unit. This part cross-references Toyota/Lexus OE numbers 4720133180 and 4720133210 for the same application.
The aluminum housing, 0.9375-inch bore, and included reservoir support proper hydraulic pressure transfer from the brake pedal to the brake system. Because the unit is supplied new and tested against OE specifications, it is suited for restoring brake pedal response after internal seal wear, fluid bypass, or corrosion-related failure. Part number NM55227 is a direct replacement option for Toyota Camry, Toyota Solara, and Lexus ES300 brake hydraulic service.
Common Problems This Part Can Address
- Low or sinking brake pedal feel
- Brake fluid leakage at the master cylinder
- Internal seal wear causing pressure loss
- Uneven or inconsistent hydraulic brake response
- Brake warning symptoms related to master cylinder failure
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and front disc brake configuration before installation. Bench bleed the master cylinder before connecting brake lines, then bleed the full brake system with DOT 3 fluid after installation. Inspect the brake booster, lines, and fittings for wear or contamination while servicing the hydraulic system. Mounting hardware, push rod, brake booster, and brake pressure switch are not included.
Quality Assurance
MPA Electrical tests each unit using OE sample references and controlled inspection processes to help ensure the master cylinder meets specification requirements before it leaves the factory. NM55227 is a new standard replacement brake master cylinder built for consistent hydraulic performance in the listed Toyota and Lexus applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Brake Master Cylinder for Toyota and Lexus
Restore braking response with this new brake master cylinder from MPA Electrical. Part number NM55227 is a standard replacement unit built with an aluminum body, integrated reservoir, and cap for select Toyota and Lexus vehicles with front disc brakes.
Compatible with 2000-2003 Toyota Solara, 2001 Lexus ES300, and 2000-2001 Toyota Camry, this master cylinder is engineered to match OE specifications using tested manufacturing processes for consistent pedal feel and hydraulic performance.
Key Features
- Brand: MPA Electrical
- Part number: NM55227
- Standard replacement brake master cylinder
- Aluminum master cylinder construction
- 0.9375 in. bore diameter
- Reservoir and master cylinder cap included
- Gasket or seal included
- Uses DOT 3 brake fluid
- Two mounting holes
- New condition
Product Details
MPA Electrical NM55227 is part of the brand’s New with front disc brakes line, focused on direct-fit brake hydraulic components for vehicles equipped with front disc brake systems. This master cylinder is built for 2000-2003 Toyota Solara, 2001 Lexus ES300, and 2000-2001 Toyota Camry applications, making it a targeted choice for drivers replacing a worn or leaking hydraulic unit. This part cross-references Toyota/Lexus OE numbers 4720133180 and 4720133210 for the same application.
The aluminum housing, 0.9375-inch bore, and included reservoir support proper hydraulic pressure transfer from the brake pedal to the brake system. Because the unit is supplied new and tested against OE specifications, it is suited for restoring brake pedal response after internal seal wear, fluid bypass, or corrosion-related failure. Part number NM55227 is a direct replacement option for Toyota Camry, Toyota Solara, and Lexus ES300 brake hydraulic service.
Common Problems This Part Can Address
- Low or sinking brake pedal feel
- Brake fluid leakage at the master cylinder
- Internal seal wear causing pressure loss
- Uneven or inconsistent hydraulic brake response
- Brake warning symptoms related to master cylinder failure
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and front disc brake configuration before installation. Bench bleed the master cylinder before connecting brake lines, then bleed the full brake system with DOT 3 fluid after installation. Inspect the brake booster, lines, and fittings for wear or contamination while servicing the hydraulic system. Mounting hardware, push rod, brake booster, and brake pressure switch are not included.
Quality Assurance
MPA Electrical tests each unit using OE sample references and controlled inspection processes to help ensure the master cylinder meets specification requirements before it leaves the factory. NM55227 is a new standard replacement brake master cylinder built for consistent hydraulic performance in the listed Toyota and Lexus applications.
