Nissens 891052 A/C Compressor
Nissens A/C Compressor for Acura MDX
The Nissens 891052 A/C compressor is built to OE standards for dependable cabin cooling in demanding conditions. It is a direct-fit compressor for 2014-2016 Acura MDX applications and uses an OE-style piston design with clutch included for a complete service replacement.
For Acura MDX owners searching for an A/C compressor for 2014-2016 Acura MDX, this unit is configured for R134A refrigerant and PAG 46 oil. The Nissens 891052 also features a 6-groove serpentine pulley, 12-volt operation, and a 215 cc capacity for consistent pumping performance.
Key Features
- OE-standard A/C compressor from Nissens
- Fits 2014-2016 Acura MDX
- Part number: 891052
- R134A refrigerant type
- Compatible with PAG 46 oil
- Oil filled: yes
- Piston compressor design
- A10HF20 compressor type
- 6-groove serpentine pulley
- Clutch included
- O-ring included
- 12-volt electrical system
Detailed Description
Nissens engineers its compressors to meet OE-level requirements, with attention to the pulley, clutch, hub, bearing, and wobble plate for stable pumping output, reduced noise, and controlled vibration. The 891052 is a practical replacement for Acura MDX A/C service when the original compressor is worn, noisy, or no longer maintaining proper refrigerant circulation. This part cross-references UAC CO29125C for the same application.
Common Problems This Part Can Address
- Weak or inconsistent cabin cooling
- Compressor noise from worn internal components
- Excessive vibration from a failing A/C compressor
- Loss of refrigerant pumping performance
- Clutch-related A/C engagement issues
Installation Notes and Tips
Fits 2014-2016 Acura MDX, N/A. The notes for this application state that the compressor is filled with shipping oil only and must be drained and refilled before installation. Verify refrigerant system cleanliness, replace the receiver/drier or accumulator as required by the service procedure, and confirm the correct PAG 46 oil charge before recharging the system. Always match the vehicle’s refrigerant specification and inspect the belt drive and O-rings during service.
Quality Assurance
Nissens manufactures this compressor to OE standards and validates it for high-stress operating conditions. The design focus on critical rotating and pumping components supports durability, low noise, and consistent performance in Acura MDX service applications.
Original: $443.98
-65%$443.98
$155.39Nissens 891052 A/C Compressor
Nissens A/C Compressor for Acura MDX
The Nissens 891052 A/C compressor is built to OE standards for dependable cabin cooling in demanding conditions. It is a direct-fit compressor for 2014-2016 Acura MDX applications and uses an OE-style piston design with clutch included for a complete service replacement.
For Acura MDX owners searching for an A/C compressor for 2014-2016 Acura MDX, this unit is configured for R134A refrigerant and PAG 46 oil. The Nissens 891052 also features a 6-groove serpentine pulley, 12-volt operation, and a 215 cc capacity for consistent pumping performance.
Key Features
- OE-standard A/C compressor from Nissens
- Fits 2014-2016 Acura MDX
- Part number: 891052
- R134A refrigerant type
- Compatible with PAG 46 oil
- Oil filled: yes
- Piston compressor design
- A10HF20 compressor type
- 6-groove serpentine pulley
- Clutch included
- O-ring included
- 12-volt electrical system
Detailed Description
Nissens engineers its compressors to meet OE-level requirements, with attention to the pulley, clutch, hub, bearing, and wobble plate for stable pumping output, reduced noise, and controlled vibration. The 891052 is a practical replacement for Acura MDX A/C service when the original compressor is worn, noisy, or no longer maintaining proper refrigerant circulation. This part cross-references UAC CO29125C for the same application.
Common Problems This Part Can Address
- Weak or inconsistent cabin cooling
- Compressor noise from worn internal components
- Excessive vibration from a failing A/C compressor
- Loss of refrigerant pumping performance
- Clutch-related A/C engagement issues
Installation Notes and Tips
Fits 2014-2016 Acura MDX, N/A. The notes for this application state that the compressor is filled with shipping oil only and must be drained and refilled before installation. Verify refrigerant system cleanliness, replace the receiver/drier or accumulator as required by the service procedure, and confirm the correct PAG 46 oil charge before recharging the system. Always match the vehicle’s refrigerant specification and inspect the belt drive and O-rings during service.
Quality Assurance
Nissens manufactures this compressor to OE standards and validates it for high-stress operating conditions. The design focus on critical rotating and pumping components supports durability, low noise, and consistent performance in Acura MDX service applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Nissens A/C Compressor for Acura MDX
The Nissens 891052 A/C compressor is built to OE standards for dependable cabin cooling in demanding conditions. It is a direct-fit compressor for 2014-2016 Acura MDX applications and uses an OE-style piston design with clutch included for a complete service replacement.
For Acura MDX owners searching for an A/C compressor for 2014-2016 Acura MDX, this unit is configured for R134A refrigerant and PAG 46 oil. The Nissens 891052 also features a 6-groove serpentine pulley, 12-volt operation, and a 215 cc capacity for consistent pumping performance.
Key Features
- OE-standard A/C compressor from Nissens
- Fits 2014-2016 Acura MDX
- Part number: 891052
- R134A refrigerant type
- Compatible with PAG 46 oil
- Oil filled: yes
- Piston compressor design
- A10HF20 compressor type
- 6-groove serpentine pulley
- Clutch included
- O-ring included
- 12-volt electrical system
Detailed Description
Nissens engineers its compressors to meet OE-level requirements, with attention to the pulley, clutch, hub, bearing, and wobble plate for stable pumping output, reduced noise, and controlled vibration. The 891052 is a practical replacement for Acura MDX A/C service when the original compressor is worn, noisy, or no longer maintaining proper refrigerant circulation. This part cross-references UAC CO29125C for the same application.
Common Problems This Part Can Address
- Weak or inconsistent cabin cooling
- Compressor noise from worn internal components
- Excessive vibration from a failing A/C compressor
- Loss of refrigerant pumping performance
- Clutch-related A/C engagement issues
Installation Notes and Tips
Fits 2014-2016 Acura MDX, N/A. The notes for this application state that the compressor is filled with shipping oil only and must be drained and refilled before installation. Verify refrigerant system cleanliness, replace the receiver/drier or accumulator as required by the service procedure, and confirm the correct PAG 46 oil charge before recharging the system. Always match the vehicle’s refrigerant specification and inspect the belt drive and O-rings during service.
Quality Assurance
Nissens manufactures this compressor to OE standards and validates it for high-stress operating conditions. The design focus on critical rotating and pumping components supports durability, low noise, and consistent performance in Acura MDX service applications.
