NTK EH0245 Engine Crankshaft Position Sensor
NTK Crankshaft Position Sensor for Import and Domestic Vehicles
The NTK Engine Crankshaft Position Sensor EH0245 is built for precise engine speed and crank position signal input on supported applications. It is a direct-fit sensor for select Dodge, Jeep, and Chrysler vehicles, including 1993-1996 Jeep Cherokee, 1993-1995 Jeep Wrangler, and 1996 Dodge Dakota applications.
NTK, The Sensor Specialist, brings OE sensor experience to the aftermarket with technical sensors tested under thermal shock, vibration, and OBD verification conditions. The EH0245 is engineered to meet or exceed OE specifications for reliable signal accuracy.
Key Features
- Engine crankshaft position sensor for ignition and engine management systems
- 14.50 in. wiring harness length
- 3-wire design with 1 female connector and 3 male terminals
- Oblong connector shape for application-specific fitment
- Sensor body diameter: 0.740 in.
- No mounting bracket included
- NTK part number EH0245
Product Details
The NTK EH0245 crankshaft position sensor monitors crankshaft position and rotational timing so the engine control module can manage ignition timing and fuel delivery. This matters on vehicles such as the Jeep Cherokee and Jeep Wrangler, where a stable crank signal is essential for starting, drivability, and consistent engine operation. As part of the NTK Engine Crankshaft Position Sensor line, EH0245 reflects NTK’s OE-focused sensor coverage for import and domestic platforms.
This part cross-references Delphi SS10221 for the same application.
What This Sensor Helps Address
- Crankshaft signal loss that can cause no-start conditions
- Intermittent stalling or sudden engine shutdown
- Rough running caused by inaccurate engine timing input
- Check engine light concerns related to crank sensor faults
- Hard starting on supported Dodge, Jeep, and Chrysler applications
Installation Notes and Fitment
- Fits 1996 Dodge Dakota, N/A
- Fits 1993-1996 Jeep Cherokee, N/A
- Fits 1994-1996 Jeep Cherokee, N/A, without Updated OBDII Connector; RPO Code XCY
- Fits 1996 Jeep Cherokee, N/A, possible relearn procedure required; consult factory service information
- Fits 1993-1995 Jeep Wrangler, N/A
- Fits 1994 Chrysler Shadow, N/A
- Fits 1994 Chrysler Spirit, N/A
- Fits 1993 Jeep Grand Cherokee, N/A
Verify connector style, harness routing, and vehicle calibration details before installation. For 1996 Jeep Cherokee applications, confirm whether a relearn procedure is required and review factory service information prior to final setup.
Quality Assurance
NTK sensors are manufactured using OE-based engineering and are validated through thermal shock, vibration, and OBD verification testing. EH0245 is built to meet or exceed OE specifications for supported applications.
Original: $67.20
-65%$67.20
$23.52NTK EH0245 Engine Crankshaft Position Sensor
NTK Crankshaft Position Sensor for Import and Domestic Vehicles
The NTK Engine Crankshaft Position Sensor EH0245 is built for precise engine speed and crank position signal input on supported applications. It is a direct-fit sensor for select Dodge, Jeep, and Chrysler vehicles, including 1993-1996 Jeep Cherokee, 1993-1995 Jeep Wrangler, and 1996 Dodge Dakota applications.
NTK, The Sensor Specialist, brings OE sensor experience to the aftermarket with technical sensors tested under thermal shock, vibration, and OBD verification conditions. The EH0245 is engineered to meet or exceed OE specifications for reliable signal accuracy.
Key Features
- Engine crankshaft position sensor for ignition and engine management systems
- 14.50 in. wiring harness length
- 3-wire design with 1 female connector and 3 male terminals
- Oblong connector shape for application-specific fitment
- Sensor body diameter: 0.740 in.
- No mounting bracket included
- NTK part number EH0245
Product Details
The NTK EH0245 crankshaft position sensor monitors crankshaft position and rotational timing so the engine control module can manage ignition timing and fuel delivery. This matters on vehicles such as the Jeep Cherokee and Jeep Wrangler, where a stable crank signal is essential for starting, drivability, and consistent engine operation. As part of the NTK Engine Crankshaft Position Sensor line, EH0245 reflects NTK’s OE-focused sensor coverage for import and domestic platforms.
This part cross-references Delphi SS10221 for the same application.
What This Sensor Helps Address
- Crankshaft signal loss that can cause no-start conditions
- Intermittent stalling or sudden engine shutdown
- Rough running caused by inaccurate engine timing input
- Check engine light concerns related to crank sensor faults
- Hard starting on supported Dodge, Jeep, and Chrysler applications
Installation Notes and Fitment
- Fits 1996 Dodge Dakota, N/A
- Fits 1993-1996 Jeep Cherokee, N/A
- Fits 1994-1996 Jeep Cherokee, N/A, without Updated OBDII Connector; RPO Code XCY
- Fits 1996 Jeep Cherokee, N/A, possible relearn procedure required; consult factory service information
- Fits 1993-1995 Jeep Wrangler, N/A
- Fits 1994 Chrysler Shadow, N/A
- Fits 1994 Chrysler Spirit, N/A
- Fits 1993 Jeep Grand Cherokee, N/A
Verify connector style, harness routing, and vehicle calibration details before installation. For 1996 Jeep Cherokee applications, confirm whether a relearn procedure is required and review factory service information prior to final setup.
Quality Assurance
NTK sensors are manufactured using OE-based engineering and are validated through thermal shock, vibration, and OBD verification testing. EH0245 is built to meet or exceed OE specifications for supported applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
NTK Crankshaft Position Sensor for Import and Domestic Vehicles
The NTK Engine Crankshaft Position Sensor EH0245 is built for precise engine speed and crank position signal input on supported applications. It is a direct-fit sensor for select Dodge, Jeep, and Chrysler vehicles, including 1993-1996 Jeep Cherokee, 1993-1995 Jeep Wrangler, and 1996 Dodge Dakota applications.
NTK, The Sensor Specialist, brings OE sensor experience to the aftermarket with technical sensors tested under thermal shock, vibration, and OBD verification conditions. The EH0245 is engineered to meet or exceed OE specifications for reliable signal accuracy.
Key Features
- Engine crankshaft position sensor for ignition and engine management systems
- 14.50 in. wiring harness length
- 3-wire design with 1 female connector and 3 male terminals
- Oblong connector shape for application-specific fitment
- Sensor body diameter: 0.740 in.
- No mounting bracket included
- NTK part number EH0245
Product Details
The NTK EH0245 crankshaft position sensor monitors crankshaft position and rotational timing so the engine control module can manage ignition timing and fuel delivery. This matters on vehicles such as the Jeep Cherokee and Jeep Wrangler, where a stable crank signal is essential for starting, drivability, and consistent engine operation. As part of the NTK Engine Crankshaft Position Sensor line, EH0245 reflects NTK’s OE-focused sensor coverage for import and domestic platforms.
This part cross-references Delphi SS10221 for the same application.
What This Sensor Helps Address
- Crankshaft signal loss that can cause no-start conditions
- Intermittent stalling or sudden engine shutdown
- Rough running caused by inaccurate engine timing input
- Check engine light concerns related to crank sensor faults
- Hard starting on supported Dodge, Jeep, and Chrysler applications
Installation Notes and Fitment
- Fits 1996 Dodge Dakota, N/A
- Fits 1993-1996 Jeep Cherokee, N/A
- Fits 1994-1996 Jeep Cherokee, N/A, without Updated OBDII Connector; RPO Code XCY
- Fits 1996 Jeep Cherokee, N/A, possible relearn procedure required; consult factory service information
- Fits 1993-1995 Jeep Wrangler, N/A
- Fits 1994 Chrysler Shadow, N/A
- Fits 1994 Chrysler Spirit, N/A
- Fits 1993 Jeep Grand Cherokee, N/A
Verify connector style, harness routing, and vehicle calibration details before installation. For 1996 Jeep Cherokee applications, confirm whether a relearn procedure is required and review factory service information prior to final setup.
Quality Assurance
NTK sensors are manufactured using OE-based engineering and are validated through thermal shock, vibration, and OBD verification testing. EH0245 is built to meet or exceed OE specifications for supported applications.
