Nugeon 99-02900A Disc Brake Caliper - Rear Right
Nugeon Rear Right Brake Caliper for Mercedes-Benz C300
The Nugeon 99-02900A remanufactured disc brake caliper is built for rear right applications on select Mercedes-Benz C300, C350e, and C400 models. This reman caliper with installation hardware is supplied with a mounting bracket where applicable and is finished in grey with a rust preventative coating for service-ready replacement.
Key Features
- Remanufactured rear right disc brake caliper
- Fits select Mercedes-Benz C300, C350e, and C400 applications
- Aluminum caliper housing with steel piston
- 44 mm piston diameter for the specified brake setup
- Bleeder screw included with M10-1.0 x 35 thread
- Banjo inlet fitting with M12-1.0 inlet thread size
- Bracket included where applicable
- Caliper slides, dust boots, and brake pad installation hardware included
- Grey finish with rust preventative coating
Product Details
Nugeon 99-02900A is a reman caliper assembly for rear right brake service on Mercedes-Benz C300, C350e, and C400 vehicles listed in the fitment data. The caliper uses an aluminum casting, a single steel piston, and a banjo-style inlet connection. It is supplied with the bracket configuration noted for the application, along with caliper slides, dust boots, and brake pad installation hardware where applicable. This part number, 99-02900A, is a direct service replacement for the specified rear brake position and brake hardware layout.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Used For These Brake Issues
- Rear right brake caliper leakage from worn seals or piston wear
- Uneven rear braking caused by a sticking caliper piston
- Corrosion or finish damage on the original caliper housing
- Brake drag related to worn slides or dust boot failure
- Service replacement after caliper bracket or hydraulic connection wear
Installation Notes and Tips
Verify rear right position, bracket configuration, and parking brake motor notes before installation. Confirm the banjo fitting, M12-1.0 inlet thread, and bleeder screw thread match the vehicle’s brake line and hydraulic setup. Inspect pads, rotors, and brake hoses during service, and bleed the brake system after installation to remove air from the hydraulic circuit. Use the vehicle-specific notes for 2015-2021 Mercedes-Benz C300, 2015 Mercedes-Benz C400, and 2016-2018 Mercedes-Benz C350e to confirm the correct rear brake configuration.
- Fits 2019-2021 Mercedes-Benz C300, rear right.
- Fits 2017-2018 Mercedes-Benz C300, rear right; AMG Sport Package; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2017-2018 Mercedes-Benz C350e, rear right; supplied wo/ parking brake motor.
- Fits 2015-2016 Mercedes-Benz C300, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2016 Mercedes-Benz C350e, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2015 Mercedes-Benz C400, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
Quality Assurance
Nugeon remanufactured brake components are processed for direct-fit service replacement use and finished with rust preventative protection to support brake system restoration. Part number 99-02900A is built to match the listed rear right Mercedes-Benz brake applications and hardware requirements.
Nugeon 99-02900A Disc Brake Caliper - Rear Right
Nugeon Rear Right Brake Caliper for Mercedes-Benz C300
The Nugeon 99-02900A remanufactured disc brake caliper is built for rear right applications on select Mercedes-Benz C300, C350e, and C400 models. This reman caliper with installation hardware is supplied with a mounting bracket where applicable and is finished in grey with a rust preventative coating for service-ready replacement.
Key Features
- Remanufactured rear right disc brake caliper
- Fits select Mercedes-Benz C300, C350e, and C400 applications
- Aluminum caliper housing with steel piston
- 44 mm piston diameter for the specified brake setup
- Bleeder screw included with M10-1.0 x 35 thread
- Banjo inlet fitting with M12-1.0 inlet thread size
- Bracket included where applicable
- Caliper slides, dust boots, and brake pad installation hardware included
- Grey finish with rust preventative coating
Product Details
Nugeon 99-02900A is a reman caliper assembly for rear right brake service on Mercedes-Benz C300, C350e, and C400 vehicles listed in the fitment data. The caliper uses an aluminum casting, a single steel piston, and a banjo-style inlet connection. It is supplied with the bracket configuration noted for the application, along with caliper slides, dust boots, and brake pad installation hardware where applicable. This part number, 99-02900A, is a direct service replacement for the specified rear brake position and brake hardware layout.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Used For These Brake Issues
- Rear right brake caliper leakage from worn seals or piston wear
- Uneven rear braking caused by a sticking caliper piston
- Corrosion or finish damage on the original caliper housing
- Brake drag related to worn slides or dust boot failure
- Service replacement after caliper bracket or hydraulic connection wear
Installation Notes and Tips
Verify rear right position, bracket configuration, and parking brake motor notes before installation. Confirm the banjo fitting, M12-1.0 inlet thread, and bleeder screw thread match the vehicle’s brake line and hydraulic setup. Inspect pads, rotors, and brake hoses during service, and bleed the brake system after installation to remove air from the hydraulic circuit. Use the vehicle-specific notes for 2015-2021 Mercedes-Benz C300, 2015 Mercedes-Benz C400, and 2016-2018 Mercedes-Benz C350e to confirm the correct rear brake configuration.
- Fits 2019-2021 Mercedes-Benz C300, rear right.
- Fits 2017-2018 Mercedes-Benz C300, rear right; AMG Sport Package; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2017-2018 Mercedes-Benz C350e, rear right; supplied wo/ parking brake motor.
- Fits 2015-2016 Mercedes-Benz C300, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2016 Mercedes-Benz C350e, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2015 Mercedes-Benz C400, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
Quality Assurance
Nugeon remanufactured brake components are processed for direct-fit service replacement use and finished with rust preventative protection to support brake system restoration. Part number 99-02900A is built to match the listed rear right Mercedes-Benz brake applications and hardware requirements.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Nugeon Rear Right Brake Caliper for Mercedes-Benz C300
The Nugeon 99-02900A remanufactured disc brake caliper is built for rear right applications on select Mercedes-Benz C300, C350e, and C400 models. This reman caliper with installation hardware is supplied with a mounting bracket where applicable and is finished in grey with a rust preventative coating for service-ready replacement.
Key Features
- Remanufactured rear right disc brake caliper
- Fits select Mercedes-Benz C300, C350e, and C400 applications
- Aluminum caliper housing with steel piston
- 44 mm piston diameter for the specified brake setup
- Bleeder screw included with M10-1.0 x 35 thread
- Banjo inlet fitting with M12-1.0 inlet thread size
- Bracket included where applicable
- Caliper slides, dust boots, and brake pad installation hardware included
- Grey finish with rust preventative coating
Product Details
Nugeon 99-02900A is a reman caliper assembly for rear right brake service on Mercedes-Benz C300, C350e, and C400 vehicles listed in the fitment data. The caliper uses an aluminum casting, a single steel piston, and a banjo-style inlet connection. It is supplied with the bracket configuration noted for the application, along with caliper slides, dust boots, and brake pad installation hardware where applicable. This part number, 99-02900A, is a direct service replacement for the specified rear brake position and brake hardware layout.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Used For These Brake Issues
- Rear right brake caliper leakage from worn seals or piston wear
- Uneven rear braking caused by a sticking caliper piston
- Corrosion or finish damage on the original caliper housing
- Brake drag related to worn slides or dust boot failure
- Service replacement after caliper bracket or hydraulic connection wear
Installation Notes and Tips
Verify rear right position, bracket configuration, and parking brake motor notes before installation. Confirm the banjo fitting, M12-1.0 inlet thread, and bleeder screw thread match the vehicle’s brake line and hydraulic setup. Inspect pads, rotors, and brake hoses during service, and bleed the brake system after installation to remove air from the hydraulic circuit. Use the vehicle-specific notes for 2015-2021 Mercedes-Benz C300, 2015 Mercedes-Benz C400, and 2016-2018 Mercedes-Benz C350e to confirm the correct rear brake configuration.
- Fits 2019-2021 Mercedes-Benz C300, rear right.
- Fits 2017-2018 Mercedes-Benz C300, rear right; AMG Sport Package; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2017-2018 Mercedes-Benz C350e, rear right; supplied wo/ parking brake motor.
- Fits 2015-2016 Mercedes-Benz C300, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2016 Mercedes-Benz C350e, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
- Fits 2015 Mercedes-Benz C400, rear right; supplied w/ mounting bracket; supplied wo/ parking brake motor.
Quality Assurance
Nugeon remanufactured brake components are processed for direct-fit service replacement use and finished with rust preventative protection to support brake system restoration. Part number 99-02900A is built to match the listed rear right Mercedes-Benz brake applications and hardware requirements.
