Nugeon 99-07297A Disc Brake Caliper - Front Left
Front Left Reman Brake Caliper
Nugeon 99-07297A is a remanufactured front left disc brake caliper with installation hardware for select Chevrolet Metro, Suzuki Swift, Pontiac Firefly, and Geo Metro applications. It is built with a cast iron housing, grey rust-preventative finish, and a 48 mm steel piston for direct brake service replacement.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on service-ready brake hydraulics with the core components needed for caliper replacement. This part number, 99-07297A, includes a mounting bracket, caliper slides, dust boots, and a bleeder screw, along with brake pad installation hardware and banjo bolt/copper crush washers where applicable.
Key Features
- Remanufactured disc brake caliper for the front left position
- Cast iron housing with rust-preventative grey finish
- 48 mm steel piston for hydraulic braking force
- Bracket included for the specified application
- Caliper slides, dust boots, and bleeder screw included
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Bleeder screw thread: M10-1.0 x 35
- Housing cast numbers: WF, 6018, L
Detailed Description
Nugeon 99-07297A is a reman brake caliper engineered for front left brake service on 1995-2001 Suzuki Swift, 1995-2000 Pontiac Firefly, 1995-1997 Geo Metro, and 1998-2001 Chevrolet Metro models. This caliper uses a single 48 mm steel piston and a banjo bolt inlet connection, making it a direct-fit hydraulic replacement for the listed vehicles. If you are replacing a worn front left caliper on a Chevrolet Metro, Suzuki Swift, Pontiac Firefly, or Geo Metro, this part number provides the correct mounting style and service hardware for the application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Uses
- Restores braking performance when the original caliper is sticking or seized
- Addresses brake fluid leakage at the caliper body or bleeder area
- Replaces a corroded or damaged front left caliper assembly
- Corrects uneven pad wear caused by caliper piston or slide issues
- Supports brake service on Metro, Swift, Firefly, and Geo Metro front axle systems
Installation Notes and Tips
Verify the front left position, inlet fitting style, and M10-1.0 thread specifications before installation. Transfer or replace brake pads as needed, and follow proper bleeding procedures after installation to remove air from the hydraulic system. Inspect the brake hose, banjo bolt sealing surfaces, and rotor condition during caliper replacement for a complete repair.
Quality Assurance
This Nugeon remanufactured caliper is built as a service replacement for the listed vehicle applications and finished with rust prevention to support brake system durability in normal use.
Original: $86.04
-65%$86.04
$30.11Nugeon 99-07297A Disc Brake Caliper - Front Left
Front Left Reman Brake Caliper
Nugeon 99-07297A is a remanufactured front left disc brake caliper with installation hardware for select Chevrolet Metro, Suzuki Swift, Pontiac Firefly, and Geo Metro applications. It is built with a cast iron housing, grey rust-preventative finish, and a 48 mm steel piston for direct brake service replacement.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on service-ready brake hydraulics with the core components needed for caliper replacement. This part number, 99-07297A, includes a mounting bracket, caliper slides, dust boots, and a bleeder screw, along with brake pad installation hardware and banjo bolt/copper crush washers where applicable.
Key Features
- Remanufactured disc brake caliper for the front left position
- Cast iron housing with rust-preventative grey finish
- 48 mm steel piston for hydraulic braking force
- Bracket included for the specified application
- Caliper slides, dust boots, and bleeder screw included
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Bleeder screw thread: M10-1.0 x 35
- Housing cast numbers: WF, 6018, L
Detailed Description
Nugeon 99-07297A is a reman brake caliper engineered for front left brake service on 1995-2001 Suzuki Swift, 1995-2000 Pontiac Firefly, 1995-1997 Geo Metro, and 1998-2001 Chevrolet Metro models. This caliper uses a single 48 mm steel piston and a banjo bolt inlet connection, making it a direct-fit hydraulic replacement for the listed vehicles. If you are replacing a worn front left caliper on a Chevrolet Metro, Suzuki Swift, Pontiac Firefly, or Geo Metro, this part number provides the correct mounting style and service hardware for the application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Uses
- Restores braking performance when the original caliper is sticking or seized
- Addresses brake fluid leakage at the caliper body or bleeder area
- Replaces a corroded or damaged front left caliper assembly
- Corrects uneven pad wear caused by caliper piston or slide issues
- Supports brake service on Metro, Swift, Firefly, and Geo Metro front axle systems
Installation Notes and Tips
Verify the front left position, inlet fitting style, and M10-1.0 thread specifications before installation. Transfer or replace brake pads as needed, and follow proper bleeding procedures after installation to remove air from the hydraulic system. Inspect the brake hose, banjo bolt sealing surfaces, and rotor condition during caliper replacement for a complete repair.
Quality Assurance
This Nugeon remanufactured caliper is built as a service replacement for the listed vehicle applications and finished with rust prevention to support brake system durability in normal use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Left Reman Brake Caliper
Nugeon 99-07297A is a remanufactured front left disc brake caliper with installation hardware for select Chevrolet Metro, Suzuki Swift, Pontiac Firefly, and Geo Metro applications. It is built with a cast iron housing, grey rust-preventative finish, and a 48 mm steel piston for direct brake service replacement.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on service-ready brake hydraulics with the core components needed for caliper replacement. This part number, 99-07297A, includes a mounting bracket, caliper slides, dust boots, and a bleeder screw, along with brake pad installation hardware and banjo bolt/copper crush washers where applicable.
Key Features
- Remanufactured disc brake caliper for the front left position
- Cast iron housing with rust-preventative grey finish
- 48 mm steel piston for hydraulic braking force
- Bracket included for the specified application
- Caliper slides, dust boots, and bleeder screw included
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Bleeder screw thread: M10-1.0 x 35
- Housing cast numbers: WF, 6018, L
Detailed Description
Nugeon 99-07297A is a reman brake caliper engineered for front left brake service on 1995-2001 Suzuki Swift, 1995-2000 Pontiac Firefly, 1995-1997 Geo Metro, and 1998-2001 Chevrolet Metro models. This caliper uses a single 48 mm steel piston and a banjo bolt inlet connection, making it a direct-fit hydraulic replacement for the listed vehicles. If you are replacing a worn front left caliper on a Chevrolet Metro, Suzuki Swift, Pontiac Firefly, or Geo Metro, this part number provides the correct mounting style and service hardware for the application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Uses
- Restores braking performance when the original caliper is sticking or seized
- Addresses brake fluid leakage at the caliper body or bleeder area
- Replaces a corroded or damaged front left caliper assembly
- Corrects uneven pad wear caused by caliper piston or slide issues
- Supports brake service on Metro, Swift, Firefly, and Geo Metro front axle systems
Installation Notes and Tips
Verify the front left position, inlet fitting style, and M10-1.0 thread specifications before installation. Transfer or replace brake pads as needed, and follow proper bleeding procedures after installation to remove air from the hydraulic system. Inspect the brake hose, banjo bolt sealing surfaces, and rotor condition during caliper replacement for a complete repair.
Quality Assurance
This Nugeon remanufactured caliper is built as a service replacement for the listed vehicle applications and finished with rust prevention to support brake system durability in normal use.
