Nugeon 99-17325A Disc Brake Caliper - Rear Left or Rear Right
Nugeon Reman Caliper for Pontiac GTO
Nugeon 99-17325A is a remanufactured disc brake caliper with installation hardware for rear brake service on select Pontiac GTO applications. It is built with an aluminum casting, grey rust-preventative finish, and a supplied mounting bracket for direct replacement on the listed rear left and rear right positions.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on service-ready brake hydraulics with the core components needed for caliper replacement. For Pontiac GTO rear brake repairs, this product line supports a straightforward OE-style service approach with the correct inlet and bleeder specifications.
Key Features
- Remanufactured disc brake caliper for brake hydraulic replacement
- Fits 2004 Pontiac GTO, rear left
- Fits 2005-2006 Pontiac GTO, rear right
- Aluminum casting with rust-preventative grey finish
- Includes bracket, caliper slides, dust boots, bleeder screw, and hardware
- Single 45 mm piston design
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Bleeder screw thread: M10-1.0 x 35
Detailed Description
Nugeon 99-17325A is a remanufactured rear disc brake caliper engineered for the Pontiac GTO rear brake system. It uses an aluminum housing with a 45 mm piston and includes the bracket, slides, dust boots, and bleeder screw specified for the application. The caliper finish is rust preventative, which supports long-term service in exposed brake locations. This part number, 99-17325A, is listed for 2004 Pontiac GTO rear left and 2005-2006 Pontiac GTO rear right applications.
For buyers searching for a rear brake caliper for Pontiac GTO, a reman caliper with bracket, or Nugeon 99-17325A, this unit matches the listed fitment and connection details, including the M10-1.0 inlet thread and banjo bolt inlet style. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Caliper Helps Address
- Brake fluid leakage at the caliper body or piston seal area
- Uneven rear braking caused by a sticking or seized caliper
- Brake drag from worn or corroded caliper slides
- Reduced braking performance from damaged bleeder or inlet connections
- Noise or pull concerns tied to a failing rear brake caliper assembly
Installation Notes and Tips
Verify the vehicle position before installation: 2004 Pontiac GTO rear left or 2005-2006 Pontiac GTO rear right. Confirm the banjo bolt inlet connection, M10-1.0 thread size, and bleeder screw specification before bleeding the system. Transfer or replace brake pads as needed, since pads are not included. Inspect brake hoses, mounting surfaces, and fluid condition during service to complete the repair correctly.
Quality Assurance
This Nugeon remanufactured caliper is built as a service replacement for the listed Pontiac GTO rear brake applications and includes the specified caliper hardware components shown in the product data. The aluminum construction, rust-preventative finish, and remanufactured design support a direct-fit brake hydraulic repair.
Nugeon 99-17325A Disc Brake Caliper - Rear Left or Rear Right
Nugeon Reman Caliper for Pontiac GTO
Nugeon 99-17325A is a remanufactured disc brake caliper with installation hardware for rear brake service on select Pontiac GTO applications. It is built with an aluminum casting, grey rust-preventative finish, and a supplied mounting bracket for direct replacement on the listed rear left and rear right positions.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on service-ready brake hydraulics with the core components needed for caliper replacement. For Pontiac GTO rear brake repairs, this product line supports a straightforward OE-style service approach with the correct inlet and bleeder specifications.
Key Features
- Remanufactured disc brake caliper for brake hydraulic replacement
- Fits 2004 Pontiac GTO, rear left
- Fits 2005-2006 Pontiac GTO, rear right
- Aluminum casting with rust-preventative grey finish
- Includes bracket, caliper slides, dust boots, bleeder screw, and hardware
- Single 45 mm piston design
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Bleeder screw thread: M10-1.0 x 35
Detailed Description
Nugeon 99-17325A is a remanufactured rear disc brake caliper engineered for the Pontiac GTO rear brake system. It uses an aluminum housing with a 45 mm piston and includes the bracket, slides, dust boots, and bleeder screw specified for the application. The caliper finish is rust preventative, which supports long-term service in exposed brake locations. This part number, 99-17325A, is listed for 2004 Pontiac GTO rear left and 2005-2006 Pontiac GTO rear right applications.
For buyers searching for a rear brake caliper for Pontiac GTO, a reman caliper with bracket, or Nugeon 99-17325A, this unit matches the listed fitment and connection details, including the M10-1.0 inlet thread and banjo bolt inlet style. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Caliper Helps Address
- Brake fluid leakage at the caliper body or piston seal area
- Uneven rear braking caused by a sticking or seized caliper
- Brake drag from worn or corroded caliper slides
- Reduced braking performance from damaged bleeder or inlet connections
- Noise or pull concerns tied to a failing rear brake caliper assembly
Installation Notes and Tips
Verify the vehicle position before installation: 2004 Pontiac GTO rear left or 2005-2006 Pontiac GTO rear right. Confirm the banjo bolt inlet connection, M10-1.0 thread size, and bleeder screw specification before bleeding the system. Transfer or replace brake pads as needed, since pads are not included. Inspect brake hoses, mounting surfaces, and fluid condition during service to complete the repair correctly.
Quality Assurance
This Nugeon remanufactured caliper is built as a service replacement for the listed Pontiac GTO rear brake applications and includes the specified caliper hardware components shown in the product data. The aluminum construction, rust-preventative finish, and remanufactured design support a direct-fit brake hydraulic repair.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Nugeon Reman Caliper for Pontiac GTO
Nugeon 99-17325A is a remanufactured disc brake caliper with installation hardware for rear brake service on select Pontiac GTO applications. It is built with an aluminum casting, grey rust-preventative finish, and a supplied mounting bracket for direct replacement on the listed rear left and rear right positions.
The Nugeon Reman Caliper w/ Installation Hardware line focuses on service-ready brake hydraulics with the core components needed for caliper replacement. For Pontiac GTO rear brake repairs, this product line supports a straightforward OE-style service approach with the correct inlet and bleeder specifications.
Key Features
- Remanufactured disc brake caliper for brake hydraulic replacement
- Fits 2004 Pontiac GTO, rear left
- Fits 2005-2006 Pontiac GTO, rear right
- Aluminum casting with rust-preventative grey finish
- Includes bracket, caliper slides, dust boots, bleeder screw, and hardware
- Single 45 mm piston design
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- Bleeder screw thread: M10-1.0 x 35
Detailed Description
Nugeon 99-17325A is a remanufactured rear disc brake caliper engineered for the Pontiac GTO rear brake system. It uses an aluminum housing with a 45 mm piston and includes the bracket, slides, dust boots, and bleeder screw specified for the application. The caliper finish is rust preventative, which supports long-term service in exposed brake locations. This part number, 99-17325A, is listed for 2004 Pontiac GTO rear left and 2005-2006 Pontiac GTO rear right applications.
For buyers searching for a rear brake caliper for Pontiac GTO, a reman caliper with bracket, or Nugeon 99-17325A, this unit matches the listed fitment and connection details, including the M10-1.0 inlet thread and banjo bolt inlet style. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Caliper Helps Address
- Brake fluid leakage at the caliper body or piston seal area
- Uneven rear braking caused by a sticking or seized caliper
- Brake drag from worn or corroded caliper slides
- Reduced braking performance from damaged bleeder or inlet connections
- Noise or pull concerns tied to a failing rear brake caliper assembly
Installation Notes and Tips
Verify the vehicle position before installation: 2004 Pontiac GTO rear left or 2005-2006 Pontiac GTO rear right. Confirm the banjo bolt inlet connection, M10-1.0 thread size, and bleeder screw specification before bleeding the system. Transfer or replace brake pads as needed, since pads are not included. Inspect brake hoses, mounting surfaces, and fluid condition during service to complete the repair correctly.
Quality Assurance
This Nugeon remanufactured caliper is built as a service replacement for the listed Pontiac GTO rear brake applications and includes the specified caliper hardware components shown in the product data. The aluminum construction, rust-preventative finish, and remanufactured design support a direct-fit brake hydraulic repair.
