Nugeon 99-17498B Disc Brake Caliper - Rear Left
Rear Left Reman Caliper for Bolt EV and Volt
Nugeon 99-17498B is a remanufactured disc brake caliper for the rear left position on select Chevrolet Bolt EV and Chevrolet Volt models. This reman caliper with installation hardware is built with an aluminum housing, grey rust-preventative finish, and the mounting bracket required for the listed applications.
Compatible With 2017-2019 Chevrolet Bolt EV, rear left, and 2016-2019 Chevrolet Volt, rear left. The Nugeon 99-17498B is a direct-fit brake hydraulics replacement for vehicles using a banjo inlet connection and M10-1.0 thread size.
Key Features
- Remanufactured disc brake caliper for rear left installation
- Aluminum casting with rust-preventative finish
- Bracket included for the listed fitments
- Bleeder screw included with M10-1.0 x 28 thread
- Caliper slides, dust boots, and brake pad installation hardware included
- Single-piston design with 38 mm piston diameter
- Banjo inlet fitting with M10-1.0 inlet thread size
Product Details
This Nugeon reman caliper, part number 99-17498B, is engineered for rear left brake service on the Chevrolet Bolt EV and Chevrolet Volt applications listed above. It uses a steel piston, includes the caliper bracket, and is supplied with the hardware needed for brake pad installation where applicable. The grey finish and rust-preventative coating help support long-term service in a brake system environment.
Nugeon’s reman caliper line focuses on replacement brake hydraulics built to match the original mounting and hydraulic connection style of the vehicle. For this application, the caliper is supplied without pads and without a parking brake motor.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Sticking or seized rear caliper movement
- Uneven rear brake pad wear
- Brake fluid leakage at the caliper body or bleeder area
- Reduced braking performance from worn hydraulic components
- Noisy or inconsistent rear brake operation after caliper wear
Installation Notes
Verify rear left fitment before ordering: 2017-2019 Chevrolet Bolt EV, rear left, and 2016-2019 Chevrolet Volt, rear left. This caliper is supplied with a mounting bracket and uses a banjo-style inlet connection with M10-1.0 thread size. The listing notes that it is supplied without a parking brake motor, so confirm your vehicle’s brake configuration before installation.
Inspect brake hoses, pads, and related hardware during service, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm the bleeder screw thread and banjo connection match the vehicle before assembly.
Quality Assurance
This is a remanufactured brake caliper from Nugeon, built for direct replacement use in the specified Chevrolet Bolt EV and Chevrolet Volt rear left applications. The part is finished with rust preventative coating and includes key service components such as the bracket, slides, dust boots, and bleeder screw for the listed fitment.
Original: $146.41
-65%$146.41
$51.24Nugeon 99-17498B Disc Brake Caliper - Rear Left
Rear Left Reman Caliper for Bolt EV and Volt
Nugeon 99-17498B is a remanufactured disc brake caliper for the rear left position on select Chevrolet Bolt EV and Chevrolet Volt models. This reman caliper with installation hardware is built with an aluminum housing, grey rust-preventative finish, and the mounting bracket required for the listed applications.
Compatible With 2017-2019 Chevrolet Bolt EV, rear left, and 2016-2019 Chevrolet Volt, rear left. The Nugeon 99-17498B is a direct-fit brake hydraulics replacement for vehicles using a banjo inlet connection and M10-1.0 thread size.
Key Features
- Remanufactured disc brake caliper for rear left installation
- Aluminum casting with rust-preventative finish
- Bracket included for the listed fitments
- Bleeder screw included with M10-1.0 x 28 thread
- Caliper slides, dust boots, and brake pad installation hardware included
- Single-piston design with 38 mm piston diameter
- Banjo inlet fitting with M10-1.0 inlet thread size
Product Details
This Nugeon reman caliper, part number 99-17498B, is engineered for rear left brake service on the Chevrolet Bolt EV and Chevrolet Volt applications listed above. It uses a steel piston, includes the caliper bracket, and is supplied with the hardware needed for brake pad installation where applicable. The grey finish and rust-preventative coating help support long-term service in a brake system environment.
Nugeon’s reman caliper line focuses on replacement brake hydraulics built to match the original mounting and hydraulic connection style of the vehicle. For this application, the caliper is supplied without pads and without a parking brake motor.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Sticking or seized rear caliper movement
- Uneven rear brake pad wear
- Brake fluid leakage at the caliper body or bleeder area
- Reduced braking performance from worn hydraulic components
- Noisy or inconsistent rear brake operation after caliper wear
Installation Notes
Verify rear left fitment before ordering: 2017-2019 Chevrolet Bolt EV, rear left, and 2016-2019 Chevrolet Volt, rear left. This caliper is supplied with a mounting bracket and uses a banjo-style inlet connection with M10-1.0 thread size. The listing notes that it is supplied without a parking brake motor, so confirm your vehicle’s brake configuration before installation.
Inspect brake hoses, pads, and related hardware during service, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm the bleeder screw thread and banjo connection match the vehicle before assembly.
Quality Assurance
This is a remanufactured brake caliper from Nugeon, built for direct replacement use in the specified Chevrolet Bolt EV and Chevrolet Volt rear left applications. The part is finished with rust preventative coating and includes key service components such as the bracket, slides, dust boots, and bleeder screw for the listed fitment.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Left Reman Caliper for Bolt EV and Volt
Nugeon 99-17498B is a remanufactured disc brake caliper for the rear left position on select Chevrolet Bolt EV and Chevrolet Volt models. This reman caliper with installation hardware is built with an aluminum housing, grey rust-preventative finish, and the mounting bracket required for the listed applications.
Compatible With 2017-2019 Chevrolet Bolt EV, rear left, and 2016-2019 Chevrolet Volt, rear left. The Nugeon 99-17498B is a direct-fit brake hydraulics replacement for vehicles using a banjo inlet connection and M10-1.0 thread size.
Key Features
- Remanufactured disc brake caliper for rear left installation
- Aluminum casting with rust-preventative finish
- Bracket included for the listed fitments
- Bleeder screw included with M10-1.0 x 28 thread
- Caliper slides, dust boots, and brake pad installation hardware included
- Single-piston design with 38 mm piston diameter
- Banjo inlet fitting with M10-1.0 inlet thread size
Product Details
This Nugeon reman caliper, part number 99-17498B, is engineered for rear left brake service on the Chevrolet Bolt EV and Chevrolet Volt applications listed above. It uses a steel piston, includes the caliper bracket, and is supplied with the hardware needed for brake pad installation where applicable. The grey finish and rust-preventative coating help support long-term service in a brake system environment.
Nugeon’s reman caliper line focuses on replacement brake hydraulics built to match the original mounting and hydraulic connection style of the vehicle. For this application, the caliper is supplied without pads and without a parking brake motor.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Sticking or seized rear caliper movement
- Uneven rear brake pad wear
- Brake fluid leakage at the caliper body or bleeder area
- Reduced braking performance from worn hydraulic components
- Noisy or inconsistent rear brake operation after caliper wear
Installation Notes
Verify rear left fitment before ordering: 2017-2019 Chevrolet Bolt EV, rear left, and 2016-2019 Chevrolet Volt, rear left. This caliper is supplied with a mounting bracket and uses a banjo-style inlet connection with M10-1.0 thread size. The listing notes that it is supplied without a parking brake motor, so confirm your vehicle’s brake configuration before installation.
Inspect brake hoses, pads, and related hardware during service, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm the bleeder screw thread and banjo connection match the vehicle before assembly.
Quality Assurance
This is a remanufactured brake caliper from Nugeon, built for direct replacement use in the specified Chevrolet Bolt EV and Chevrolet Volt rear left applications. The part is finished with rust preventative coating and includes key service components such as the bracket, slides, dust boots, and bleeder screw for the listed fitment.
