One Stop Solutions 13090 Radiator
Radiator for Toyota Venza
Restore cooling performance with this OSC Premium New Automotive Radiator, part number 13090. Built for the 2009-2016 Toyota Venza, it follows OES form and function with a downflow design, plastic tanks, and premium-grade aluminum construction for a direct-fit replacement.
Key Features
- Fits 2009-2016 Toyota Venza, N/A
- OSC part number 13090 for direct identification
- Downflow radiator design with 1-row core
- Transmission oil cooler included; engine oil cooler not included
- Premium-grade aluminum tubes and fins with plastic tanks
- Die-cut gasket design for leak resistance
- Individually pressure tested during production
- Factory-style fitment with matched header dimensions and 1 3/8 in. inlet and outlet diameters
Detailed Description
The OSC 13090 radiator is engineered for OE-style fit, form, and function on the Toyota Venza. It uses premium aluminum core components with cadmium-plated tubes inside and out to help resist premature failure, while the plastic tank construction follows the original equipment layout. This radiator includes a plated transmission oil cooler and is built to match the cooling system requirements of Venza applications from 2009 through 2016.
OSC designs this radiator with factory-spec component placement, torqued fittings, and a die-cut gasket to support a secure seal. The core measures 15 3/4 in. high by 28 5/8 in. wide with a 1 in. thickness, and the unit is configured as a downflow radiator. For buyers searching for a 2009-2016 Toyota Venza radiator replacement, part number 13090 offers a direct-fit solution that aligns with OE cooler design where originally equipped.
This part cross-references Toyota 164000V010 and OSC A13090 for the same application.
Common Problems This Radiator Can Address
- Overheating caused by a leaking or restricted radiator
- Transmission fluid temperature issues related to a failing cooler circuit
- Coolant loss from cracked tanks or worn seals
- Reduced heat transfer from aged or clogged core passages
- Fitment problems from damaged original radiator mounting points
Installation Notes and Tips
Verify radiator dimensions, inlet and outlet size, and cooler line spacing before installation. This radiator is built for a drop-in style replacement on the Toyota Venza, and all necessary fittings or hardware are included in each unit. Flush the cooling system, inspect hoses and clamps, and confirm proper transmission cooler line routing before filling and bleeding the system.
Quality Assurance
OSC tests complete radiators up to three times during production: cooler circuits are checked before installation, the core is tested before assembly, and the finished unit is tested again after assembly. Part number 13090 is engineered to meet OE-style cooler design requirements and is built with premium materials for consistent cooling performance.
Original: $167.05
-65%$167.05
$58.47One Stop Solutions 13090 Radiator
Radiator for Toyota Venza
Restore cooling performance with this OSC Premium New Automotive Radiator, part number 13090. Built for the 2009-2016 Toyota Venza, it follows OES form and function with a downflow design, plastic tanks, and premium-grade aluminum construction for a direct-fit replacement.
Key Features
- Fits 2009-2016 Toyota Venza, N/A
- OSC part number 13090 for direct identification
- Downflow radiator design with 1-row core
- Transmission oil cooler included; engine oil cooler not included
- Premium-grade aluminum tubes and fins with plastic tanks
- Die-cut gasket design for leak resistance
- Individually pressure tested during production
- Factory-style fitment with matched header dimensions and 1 3/8 in. inlet and outlet diameters
Detailed Description
The OSC 13090 radiator is engineered for OE-style fit, form, and function on the Toyota Venza. It uses premium aluminum core components with cadmium-plated tubes inside and out to help resist premature failure, while the plastic tank construction follows the original equipment layout. This radiator includes a plated transmission oil cooler and is built to match the cooling system requirements of Venza applications from 2009 through 2016.
OSC designs this radiator with factory-spec component placement, torqued fittings, and a die-cut gasket to support a secure seal. The core measures 15 3/4 in. high by 28 5/8 in. wide with a 1 in. thickness, and the unit is configured as a downflow radiator. For buyers searching for a 2009-2016 Toyota Venza radiator replacement, part number 13090 offers a direct-fit solution that aligns with OE cooler design where originally equipped.
This part cross-references Toyota 164000V010 and OSC A13090 for the same application.
Common Problems This Radiator Can Address
- Overheating caused by a leaking or restricted radiator
- Transmission fluid temperature issues related to a failing cooler circuit
- Coolant loss from cracked tanks or worn seals
- Reduced heat transfer from aged or clogged core passages
- Fitment problems from damaged original radiator mounting points
Installation Notes and Tips
Verify radiator dimensions, inlet and outlet size, and cooler line spacing before installation. This radiator is built for a drop-in style replacement on the Toyota Venza, and all necessary fittings or hardware are included in each unit. Flush the cooling system, inspect hoses and clamps, and confirm proper transmission cooler line routing before filling and bleeding the system.
Quality Assurance
OSC tests complete radiators up to three times during production: cooler circuits are checked before installation, the core is tested before assembly, and the finished unit is tested again after assembly. Part number 13090 is engineered to meet OE-style cooler design requirements and is built with premium materials for consistent cooling performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Radiator for Toyota Venza
Restore cooling performance with this OSC Premium New Automotive Radiator, part number 13090. Built for the 2009-2016 Toyota Venza, it follows OES form and function with a downflow design, plastic tanks, and premium-grade aluminum construction for a direct-fit replacement.
Key Features
- Fits 2009-2016 Toyota Venza, N/A
- OSC part number 13090 for direct identification
- Downflow radiator design with 1-row core
- Transmission oil cooler included; engine oil cooler not included
- Premium-grade aluminum tubes and fins with plastic tanks
- Die-cut gasket design for leak resistance
- Individually pressure tested during production
- Factory-style fitment with matched header dimensions and 1 3/8 in. inlet and outlet diameters
Detailed Description
The OSC 13090 radiator is engineered for OE-style fit, form, and function on the Toyota Venza. It uses premium aluminum core components with cadmium-plated tubes inside and out to help resist premature failure, while the plastic tank construction follows the original equipment layout. This radiator includes a plated transmission oil cooler and is built to match the cooling system requirements of Venza applications from 2009 through 2016.
OSC designs this radiator with factory-spec component placement, torqued fittings, and a die-cut gasket to support a secure seal. The core measures 15 3/4 in. high by 28 5/8 in. wide with a 1 in. thickness, and the unit is configured as a downflow radiator. For buyers searching for a 2009-2016 Toyota Venza radiator replacement, part number 13090 offers a direct-fit solution that aligns with OE cooler design where originally equipped.
This part cross-references Toyota 164000V010 and OSC A13090 for the same application.
Common Problems This Radiator Can Address
- Overheating caused by a leaking or restricted radiator
- Transmission fluid temperature issues related to a failing cooler circuit
- Coolant loss from cracked tanks or worn seals
- Reduced heat transfer from aged or clogged core passages
- Fitment problems from damaged original radiator mounting points
Installation Notes and Tips
Verify radiator dimensions, inlet and outlet size, and cooler line spacing before installation. This radiator is built for a drop-in style replacement on the Toyota Venza, and all necessary fittings or hardware are included in each unit. Flush the cooling system, inspect hoses and clamps, and confirm proper transmission cooler line routing before filling and bleeding the system.
Quality Assurance
OSC tests complete radiators up to three times during production: cooler circuits are checked before installation, the core is tested before assembly, and the finished unit is tested again after assembly. Part number 13090 is engineered to meet OE-style cooler design requirements and is built with premium materials for consistent cooling performance.
