One Stop Solutions 13319 Radiator
Radiator for 2012-2018 Toyota Prius C
This OSC Premium New Automotive Radiator is built for the 2012-2018 Toyota Prius C with an OE-style form and function. Part number 13319 is engineered for direct replacement service, with a crossflow design and premium-grade aluminum core construction paired with plastic tanks.
Key Features
- Fits 2012-2018 Toyota Prius C
- Part number 13319
- Crossflow radiator design
- Core dimensions: 23 5/8 in. height, 15 15/16 in. width, 5/8 in. thickness
- 1-row core construction
- 1 1/4 in. inlet and outlet diameters
- Premium-grade aluminum core with plastic tanks
- No engine oil cooler and no transmission oil cooler
- Individually pressure tested during production
Detailed Description
OSC designs this radiator to match original equipment form and function for the Toyota Prius C cooling system. The core uses premium aluminum construction with cadmium-plated tubes inside and out to help resist premature failure, while the die-cut gasket supports a leak-resistant seal. The radiator is engineered for multi-fit applications without changing the intended look or fit, and factory-style fittings and hardware are included where required by the unit design. Part number 13319 is also cross-referenced with APDI 8013319 for the same application.
For drivers searching for a Toyota Prius C radiator replacement, this unit addresses OE-style cooling needs with a single-row crossflow layout and factory-matched inlet and outlet sizing. It is a direct-fit option for 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Toyota Prius C models.
Common Cooling Issues This Radiator Can Address
- Coolant leaks from a damaged or aging radiator tank or core
- Overheating caused by restricted or weakened radiator flow
- Cooling performance loss from corrosion or internal tube wear
- Fitment problems from a radiator that does not match OE dimensions
- Repeated failures on higher-mileage Toyota Prius C cooling systems
Installation Notes and Tips
Verify core dimensions, inlet and outlet sizes, and the absence of engine and transmission oil coolers before installation. Inspect hoses, clamps, and mounting points for wear, and confirm the cooling system is properly flushed before filling. Because this radiator is pressure tested and built to factory-style specifications, it is suited for direct replacement service on the listed Prius C applications.
Quality Assurance
OSC tests complete radiators multiple times during production: cooler circuits are checked before tank installation, the core is tested before assembly, and the finished unit is tested again after assembly. This process supports consistent sealing and cooling-system reliability for the 2012-2018 Toyota Prius C. Part number 13319 is built to OE-style standards for fit and function.
One Stop Solutions 13319 Radiator
Radiator for 2012-2018 Toyota Prius C
This OSC Premium New Automotive Radiator is built for the 2012-2018 Toyota Prius C with an OE-style form and function. Part number 13319 is engineered for direct replacement service, with a crossflow design and premium-grade aluminum core construction paired with plastic tanks.
Key Features
- Fits 2012-2018 Toyota Prius C
- Part number 13319
- Crossflow radiator design
- Core dimensions: 23 5/8 in. height, 15 15/16 in. width, 5/8 in. thickness
- 1-row core construction
- 1 1/4 in. inlet and outlet diameters
- Premium-grade aluminum core with plastic tanks
- No engine oil cooler and no transmission oil cooler
- Individually pressure tested during production
Detailed Description
OSC designs this radiator to match original equipment form and function for the Toyota Prius C cooling system. The core uses premium aluminum construction with cadmium-plated tubes inside and out to help resist premature failure, while the die-cut gasket supports a leak-resistant seal. The radiator is engineered for multi-fit applications without changing the intended look or fit, and factory-style fittings and hardware are included where required by the unit design. Part number 13319 is also cross-referenced with APDI 8013319 for the same application.
For drivers searching for a Toyota Prius C radiator replacement, this unit addresses OE-style cooling needs with a single-row crossflow layout and factory-matched inlet and outlet sizing. It is a direct-fit option for 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Toyota Prius C models.
Common Cooling Issues This Radiator Can Address
- Coolant leaks from a damaged or aging radiator tank or core
- Overheating caused by restricted or weakened radiator flow
- Cooling performance loss from corrosion or internal tube wear
- Fitment problems from a radiator that does not match OE dimensions
- Repeated failures on higher-mileage Toyota Prius C cooling systems
Installation Notes and Tips
Verify core dimensions, inlet and outlet sizes, and the absence of engine and transmission oil coolers before installation. Inspect hoses, clamps, and mounting points for wear, and confirm the cooling system is properly flushed before filling. Because this radiator is pressure tested and built to factory-style specifications, it is suited for direct replacement service on the listed Prius C applications.
Quality Assurance
OSC tests complete radiators multiple times during production: cooler circuits are checked before tank installation, the core is tested before assembly, and the finished unit is tested again after assembly. This process supports consistent sealing and cooling-system reliability for the 2012-2018 Toyota Prius C. Part number 13319 is built to OE-style standards for fit and function.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Radiator for 2012-2018 Toyota Prius C
This OSC Premium New Automotive Radiator is built for the 2012-2018 Toyota Prius C with an OE-style form and function. Part number 13319 is engineered for direct replacement service, with a crossflow design and premium-grade aluminum core construction paired with plastic tanks.
Key Features
- Fits 2012-2018 Toyota Prius C
- Part number 13319
- Crossflow radiator design
- Core dimensions: 23 5/8 in. height, 15 15/16 in. width, 5/8 in. thickness
- 1-row core construction
- 1 1/4 in. inlet and outlet diameters
- Premium-grade aluminum core with plastic tanks
- No engine oil cooler and no transmission oil cooler
- Individually pressure tested during production
Detailed Description
OSC designs this radiator to match original equipment form and function for the Toyota Prius C cooling system. The core uses premium aluminum construction with cadmium-plated tubes inside and out to help resist premature failure, while the die-cut gasket supports a leak-resistant seal. The radiator is engineered for multi-fit applications without changing the intended look or fit, and factory-style fittings and hardware are included where required by the unit design. Part number 13319 is also cross-referenced with APDI 8013319 for the same application.
For drivers searching for a Toyota Prius C radiator replacement, this unit addresses OE-style cooling needs with a single-row crossflow layout and factory-matched inlet and outlet sizing. It is a direct-fit option for 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Toyota Prius C models.
Common Cooling Issues This Radiator Can Address
- Coolant leaks from a damaged or aging radiator tank or core
- Overheating caused by restricted or weakened radiator flow
- Cooling performance loss from corrosion or internal tube wear
- Fitment problems from a radiator that does not match OE dimensions
- Repeated failures on higher-mileage Toyota Prius C cooling systems
Installation Notes and Tips
Verify core dimensions, inlet and outlet sizes, and the absence of engine and transmission oil coolers before installation. Inspect hoses, clamps, and mounting points for wear, and confirm the cooling system is properly flushed before filling. Because this radiator is pressure tested and built to factory-style specifications, it is suited for direct replacement service on the listed Prius C applications.
Quality Assurance
OSC tests complete radiators multiple times during production: cooler circuits are checked before tank installation, the core is tested before assembly, and the finished unit is tested again after assembly. This process supports consistent sealing and cooling-system reliability for the 2012-2018 Toyota Prius C. Part number 13319 is built to OE-style standards for fit and function.
