One Stop Solutions 13362 Radiator
Radiator for Ford Explorer 2015-2019
Restore cooling performance with this OSC radiator from One Stop Solutions, part number 13362. It is built for 2015-2019 Ford Explorer models with Power Take Off and follows an OE-style crossflow layout for direct replacement service.
Key Features
- Fits 2015-2019 Ford Explorer, w/ Power Take Off
- Crossflow radiator design with a 1-row core
- Core dimensions: 28 3/4 in. height, 19 3/16 in. width, 1-1/4 in. thickness
- Plastic tank construction with PA core material
- 1 5/16 in. inlet and outlet diameters
- No engine oil cooler, transmission oil cooler, or cap included
- Built with fitted and torqued components to factory specifications
- Tested during production for core and cooler integrity
Detailed Description
The One Stop Solutions 13362 radiator is engineered as a direct-fit replacement for the Ford Explorer cooling system. Its crossflow configuration, single-row core, and OE-style dimensions support proper airflow and heat transfer, while the plastic tank and PA core construction help maintain a factory-like fit and function. This radiator is intended for 2015-2019 Ford Explorer applications with Power Take Off, and it cross-references Spectra Premium CU13362 and DB5Z8005DA for the same application.
OSC radiators incorporate design updates aimed at addressing common wear points in higher-mileage vehicles, including improved fin density and thicker core construction where applicable. The result is a replacement radiator built around factory specifications and validated through multiple production tests before release. If you are replacing a leaking or inefficient Ford Explorer radiator, part number 13362 provides a straightforward OE-style solution.
Common Problems This Radiator Can Address
- Coolant leaks from a cracked or aging radiator tank
- Overheating caused by restricted coolant flow or reduced heat dissipation
- Temperature instability during towing or heavy-duty operation
- Corrosion or fatigue in an original radiator assembly
- Cooling system performance loss on high-mileage Ford Explorer vehicles
Installation Notes and Tips
Verify that your vehicle is a 2015-2019 Ford Explorer with Power Take Off before ordering. Compare inlet and outlet sizes, core dimensions, and mounting points against the original radiator to confirm a proper match. Flush the cooling system, inspect hoses and clamps, and check for contamination before installing the replacement unit. Because this radiator does not include a cap or integrated oil coolers, reuse or replace related components as needed based on your vehicle configuration.
Quality Assurance
OSC tests the radiator core before assembly and retests the completed unit during production. Transmission and engine oil cooler circuits are also checked prior to installation when present, and components are fitted to factory specifications to support consistent OE-style performance.
One Stop Solutions 13362 Radiator
Radiator for Ford Explorer 2015-2019
Restore cooling performance with this OSC radiator from One Stop Solutions, part number 13362. It is built for 2015-2019 Ford Explorer models with Power Take Off and follows an OE-style crossflow layout for direct replacement service.
Key Features
- Fits 2015-2019 Ford Explorer, w/ Power Take Off
- Crossflow radiator design with a 1-row core
- Core dimensions: 28 3/4 in. height, 19 3/16 in. width, 1-1/4 in. thickness
- Plastic tank construction with PA core material
- 1 5/16 in. inlet and outlet diameters
- No engine oil cooler, transmission oil cooler, or cap included
- Built with fitted and torqued components to factory specifications
- Tested during production for core and cooler integrity
Detailed Description
The One Stop Solutions 13362 radiator is engineered as a direct-fit replacement for the Ford Explorer cooling system. Its crossflow configuration, single-row core, and OE-style dimensions support proper airflow and heat transfer, while the plastic tank and PA core construction help maintain a factory-like fit and function. This radiator is intended for 2015-2019 Ford Explorer applications with Power Take Off, and it cross-references Spectra Premium CU13362 and DB5Z8005DA for the same application.
OSC radiators incorporate design updates aimed at addressing common wear points in higher-mileage vehicles, including improved fin density and thicker core construction where applicable. The result is a replacement radiator built around factory specifications and validated through multiple production tests before release. If you are replacing a leaking or inefficient Ford Explorer radiator, part number 13362 provides a straightforward OE-style solution.
Common Problems This Radiator Can Address
- Coolant leaks from a cracked or aging radiator tank
- Overheating caused by restricted coolant flow or reduced heat dissipation
- Temperature instability during towing or heavy-duty operation
- Corrosion or fatigue in an original radiator assembly
- Cooling system performance loss on high-mileage Ford Explorer vehicles
Installation Notes and Tips
Verify that your vehicle is a 2015-2019 Ford Explorer with Power Take Off before ordering. Compare inlet and outlet sizes, core dimensions, and mounting points against the original radiator to confirm a proper match. Flush the cooling system, inspect hoses and clamps, and check for contamination before installing the replacement unit. Because this radiator does not include a cap or integrated oil coolers, reuse or replace related components as needed based on your vehicle configuration.
Quality Assurance
OSC tests the radiator core before assembly and retests the completed unit during production. Transmission and engine oil cooler circuits are also checked prior to installation when present, and components are fitted to factory specifications to support consistent OE-style performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Radiator for Ford Explorer 2015-2019
Restore cooling performance with this OSC radiator from One Stop Solutions, part number 13362. It is built for 2015-2019 Ford Explorer models with Power Take Off and follows an OE-style crossflow layout for direct replacement service.
Key Features
- Fits 2015-2019 Ford Explorer, w/ Power Take Off
- Crossflow radiator design with a 1-row core
- Core dimensions: 28 3/4 in. height, 19 3/16 in. width, 1-1/4 in. thickness
- Plastic tank construction with PA core material
- 1 5/16 in. inlet and outlet diameters
- No engine oil cooler, transmission oil cooler, or cap included
- Built with fitted and torqued components to factory specifications
- Tested during production for core and cooler integrity
Detailed Description
The One Stop Solutions 13362 radiator is engineered as a direct-fit replacement for the Ford Explorer cooling system. Its crossflow configuration, single-row core, and OE-style dimensions support proper airflow and heat transfer, while the plastic tank and PA core construction help maintain a factory-like fit and function. This radiator is intended for 2015-2019 Ford Explorer applications with Power Take Off, and it cross-references Spectra Premium CU13362 and DB5Z8005DA for the same application.
OSC radiators incorporate design updates aimed at addressing common wear points in higher-mileage vehicles, including improved fin density and thicker core construction where applicable. The result is a replacement radiator built around factory specifications and validated through multiple production tests before release. If you are replacing a leaking or inefficient Ford Explorer radiator, part number 13362 provides a straightforward OE-style solution.
Common Problems This Radiator Can Address
- Coolant leaks from a cracked or aging radiator tank
- Overheating caused by restricted coolant flow or reduced heat dissipation
- Temperature instability during towing or heavy-duty operation
- Corrosion or fatigue in an original radiator assembly
- Cooling system performance loss on high-mileage Ford Explorer vehicles
Installation Notes and Tips
Verify that your vehicle is a 2015-2019 Ford Explorer with Power Take Off before ordering. Compare inlet and outlet sizes, core dimensions, and mounting points against the original radiator to confirm a proper match. Flush the cooling system, inspect hoses and clamps, and check for contamination before installing the replacement unit. Because this radiator does not include a cap or integrated oil coolers, reuse or replace related components as needed based on your vehicle configuration.
Quality Assurance
OSC tests the radiator core before assembly and retests the completed unit during production. Transmission and engine oil cooler circuits are also checked prior to installation when present, and components are fitted to factory specifications to support consistent OE-style performance.
