One Stop Solutions 13400 Radiator
Radiator for Jeep Cherokee and Chrysler 200
This One Stop Solutions radiator, part number 13400, is built for direct replacement in select Jeep Cherokee and Chrysler 200 applications. It uses a crossflow design with a plastic tank and PA core construction to support OE-style cooling performance and a straightforward install.
Key Features
- Fits 2014-2018 Jeep Cherokee, N/A, Single Fan
- Fits 2015-2017 Chrysler 200, N/A
- Crossflow radiator design for the listed applications
- PA core material with plastic tanks
- Core dimensions: 26 9/16 in. height, 17 1/16 in. width, 5/8 in. thickness
- No engine oil cooler, transmission oil cooler, or cap included
- Inlet diameter: 1 3/16 in.; outlet diameter: 1 1/4 in.
- Part number 13400 cross-references Koyorad A13400 and Spectra Premium CU13400
Detailed Description
One Stop Solutions 13400 is an OSC radiator engineered for direct-fit replacement in the Jeep Cherokee and Chrysler 200. The radiator is built with fitted and torqued components to factory specifications, and OSC uses premium-grade tubes, fins, headers, tanks, and related components to improve durability. Engineering updates are used to address common original-design failures, including added fin density and a thicker core to better manage heat in higher-mileage vehicles.
This radiator is a practical choice for drivers searching for a Jeep Cherokee radiator replacement or a Chrysler 200 cooling system repair part. The design focuses on OE performance, consistent fitment, and long-term cooling stability for the listed vehicles. Part number 13400 is also referenced by OE and aftermarket numbering systems for the same application.
What It Helps Address
- Overheating caused by a worn or restricted radiator core
- Coolant leaks from aging tanks or core joints
- Reduced cooling efficiency in high-mileage vehicles
- Fitment issues from damaged or non-OE-style replacement radiators
- Cooling system service needs on Jeep Cherokee and Chrysler 200 models
Installation Notes and Tips
Verify radiator dimensions, inlet and outlet sizes, and vehicle configuration before installation. This unit is listed for 2014-2018 Jeep Cherokee with Single Fan notes and 2015-2017 Chrysler 200 applications. Confirm hose routing, mounting points, and transmission cooler requirements against the vehicle before removal of the original radiator. Because no cap is included, reuse or replace the cap separately as needed.
Quality Assurance
OSC tests complete radiators up to three times during production. The transmission and engine oil coolers are tested before installation into the tank, the core is tested before assembly, and the finished unit is tested again after assembly to verify integrity and performance.
One Stop Solutions 13400 Radiator
Radiator for Jeep Cherokee and Chrysler 200
This One Stop Solutions radiator, part number 13400, is built for direct replacement in select Jeep Cherokee and Chrysler 200 applications. It uses a crossflow design with a plastic tank and PA core construction to support OE-style cooling performance and a straightforward install.
Key Features
- Fits 2014-2018 Jeep Cherokee, N/A, Single Fan
- Fits 2015-2017 Chrysler 200, N/A
- Crossflow radiator design for the listed applications
- PA core material with plastic tanks
- Core dimensions: 26 9/16 in. height, 17 1/16 in. width, 5/8 in. thickness
- No engine oil cooler, transmission oil cooler, or cap included
- Inlet diameter: 1 3/16 in.; outlet diameter: 1 1/4 in.
- Part number 13400 cross-references Koyorad A13400 and Spectra Premium CU13400
Detailed Description
One Stop Solutions 13400 is an OSC radiator engineered for direct-fit replacement in the Jeep Cherokee and Chrysler 200. The radiator is built with fitted and torqued components to factory specifications, and OSC uses premium-grade tubes, fins, headers, tanks, and related components to improve durability. Engineering updates are used to address common original-design failures, including added fin density and a thicker core to better manage heat in higher-mileage vehicles.
This radiator is a practical choice for drivers searching for a Jeep Cherokee radiator replacement or a Chrysler 200 cooling system repair part. The design focuses on OE performance, consistent fitment, and long-term cooling stability for the listed vehicles. Part number 13400 is also referenced by OE and aftermarket numbering systems for the same application.
What It Helps Address
- Overheating caused by a worn or restricted radiator core
- Coolant leaks from aging tanks or core joints
- Reduced cooling efficiency in high-mileage vehicles
- Fitment issues from damaged or non-OE-style replacement radiators
- Cooling system service needs on Jeep Cherokee and Chrysler 200 models
Installation Notes and Tips
Verify radiator dimensions, inlet and outlet sizes, and vehicle configuration before installation. This unit is listed for 2014-2018 Jeep Cherokee with Single Fan notes and 2015-2017 Chrysler 200 applications. Confirm hose routing, mounting points, and transmission cooler requirements against the vehicle before removal of the original radiator. Because no cap is included, reuse or replace the cap separately as needed.
Quality Assurance
OSC tests complete radiators up to three times during production. The transmission and engine oil coolers are tested before installation into the tank, the core is tested before assembly, and the finished unit is tested again after assembly to verify integrity and performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Radiator for Jeep Cherokee and Chrysler 200
This One Stop Solutions radiator, part number 13400, is built for direct replacement in select Jeep Cherokee and Chrysler 200 applications. It uses a crossflow design with a plastic tank and PA core construction to support OE-style cooling performance and a straightforward install.
Key Features
- Fits 2014-2018 Jeep Cherokee, N/A, Single Fan
- Fits 2015-2017 Chrysler 200, N/A
- Crossflow radiator design for the listed applications
- PA core material with plastic tanks
- Core dimensions: 26 9/16 in. height, 17 1/16 in. width, 5/8 in. thickness
- No engine oil cooler, transmission oil cooler, or cap included
- Inlet diameter: 1 3/16 in.; outlet diameter: 1 1/4 in.
- Part number 13400 cross-references Koyorad A13400 and Spectra Premium CU13400
Detailed Description
One Stop Solutions 13400 is an OSC radiator engineered for direct-fit replacement in the Jeep Cherokee and Chrysler 200. The radiator is built with fitted and torqued components to factory specifications, and OSC uses premium-grade tubes, fins, headers, tanks, and related components to improve durability. Engineering updates are used to address common original-design failures, including added fin density and a thicker core to better manage heat in higher-mileage vehicles.
This radiator is a practical choice for drivers searching for a Jeep Cherokee radiator replacement or a Chrysler 200 cooling system repair part. The design focuses on OE performance, consistent fitment, and long-term cooling stability for the listed vehicles. Part number 13400 is also referenced by OE and aftermarket numbering systems for the same application.
What It Helps Address
- Overheating caused by a worn or restricted radiator core
- Coolant leaks from aging tanks or core joints
- Reduced cooling efficiency in high-mileage vehicles
- Fitment issues from damaged or non-OE-style replacement radiators
- Cooling system service needs on Jeep Cherokee and Chrysler 200 models
Installation Notes and Tips
Verify radiator dimensions, inlet and outlet sizes, and vehicle configuration before installation. This unit is listed for 2014-2018 Jeep Cherokee with Single Fan notes and 2015-2017 Chrysler 200 applications. Confirm hose routing, mounting points, and transmission cooler requirements against the vehicle before removal of the original radiator. Because no cap is included, reuse or replace the cap separately as needed.
Quality Assurance
OSC tests complete radiators up to three times during production. The transmission and engine oil coolers are tested before installation into the tank, the core is tested before assembly, and the finished unit is tested again after assembly to verify integrity and performance.
