One Stop Solutions 4405 A/C Condenser
OE-Style A/C Condenser for Ford Probe
This One Stop Solutions A/C condenser is built for 1993-1997 Ford Probe applications with a drop-in fit, form, and function. Part number 4405 is engineered as a direct replacement for the original condenser layout, with aluminum construction and a serpentine core design for efficient heat transfer.
Compatible With 1993-1997 Ford Probe, N/A. Part number 4405 is a practical choice when replacing a leaking, damaged, or inefficient condenser on a Ford Probe.
Key Features
- OE-style replacement condenser for original fit and function
- Aluminum construction for heat transfer efficiency
- Serpentine core design with extruded tubes for structural integrity
- Louvered aluminum fins bonded through furnace brazing for improved heat dissipation
- Individually pressure tested before release
- Quick connection inlet fitting and O-ring outlet fitting
- Multi-fit engineering without changing the look or fit
Product Details
The OSC Premium New Automotive Condenser is designed to match original equipment form and function while addressing common wear points found in aging cooling systems. Its aluminum core measures 22 mm thick, 24 13/16 in. wide, and 12 5/8 in. long, with a serpentine layout that supports efficient refrigerant cooling. The furnace-brazed aluminum fins and tubes are built to promote heat dissipation, while the extruded tube construction adds strength for long-term service.
This part cross-references APDI 7014405 for the same application. Use part number 4405 when searching for a replacement A/C condenser for Ford Probe models from 1993 through 1997.
Common Issues This Part May Solve
- Refrigerant leaks caused by a cracked or corroded condenser
- Reduced A/C cooling performance from restricted heat transfer
- Physical damage from road debris or front-end impact
- Cooling system inefficiency on higher-mileage Ford Probe vehicles
- Fitment problems from a worn or mismatched original condenser
Installation Notes and Tips
Verify inlet and outlet fitting style before installation: this condenser uses a quick connection inlet and an O-ring outlet. Inspect the surrounding A/C components, flush the system as needed, and replace any damaged seals or lines before charging the system. Confirm all mounting points and line routing match the original layout on your Ford Probe.
Quality Assurance
Each condenser is individually pressure tested and built from premium-grade aluminum materials to support durability and consistent performance. The design is engineered to address original design failures and improve service life in high-mileage vehicles.
One Stop Solutions 4405 A/C Condenser
OE-Style A/C Condenser for Ford Probe
This One Stop Solutions A/C condenser is built for 1993-1997 Ford Probe applications with a drop-in fit, form, and function. Part number 4405 is engineered as a direct replacement for the original condenser layout, with aluminum construction and a serpentine core design for efficient heat transfer.
Compatible With 1993-1997 Ford Probe, N/A. Part number 4405 is a practical choice when replacing a leaking, damaged, or inefficient condenser on a Ford Probe.
Key Features
- OE-style replacement condenser for original fit and function
- Aluminum construction for heat transfer efficiency
- Serpentine core design with extruded tubes for structural integrity
- Louvered aluminum fins bonded through furnace brazing for improved heat dissipation
- Individually pressure tested before release
- Quick connection inlet fitting and O-ring outlet fitting
- Multi-fit engineering without changing the look or fit
Product Details
The OSC Premium New Automotive Condenser is designed to match original equipment form and function while addressing common wear points found in aging cooling systems. Its aluminum core measures 22 mm thick, 24 13/16 in. wide, and 12 5/8 in. long, with a serpentine layout that supports efficient refrigerant cooling. The furnace-brazed aluminum fins and tubes are built to promote heat dissipation, while the extruded tube construction adds strength for long-term service.
This part cross-references APDI 7014405 for the same application. Use part number 4405 when searching for a replacement A/C condenser for Ford Probe models from 1993 through 1997.
Common Issues This Part May Solve
- Refrigerant leaks caused by a cracked or corroded condenser
- Reduced A/C cooling performance from restricted heat transfer
- Physical damage from road debris or front-end impact
- Cooling system inefficiency on higher-mileage Ford Probe vehicles
- Fitment problems from a worn or mismatched original condenser
Installation Notes and Tips
Verify inlet and outlet fitting style before installation: this condenser uses a quick connection inlet and an O-ring outlet. Inspect the surrounding A/C components, flush the system as needed, and replace any damaged seals or lines before charging the system. Confirm all mounting points and line routing match the original layout on your Ford Probe.
Quality Assurance
Each condenser is individually pressure tested and built from premium-grade aluminum materials to support durability and consistent performance. The design is engineered to address original design failures and improve service life in high-mileage vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style A/C Condenser for Ford Probe
This One Stop Solutions A/C condenser is built for 1993-1997 Ford Probe applications with a drop-in fit, form, and function. Part number 4405 is engineered as a direct replacement for the original condenser layout, with aluminum construction and a serpentine core design for efficient heat transfer.
Compatible With 1993-1997 Ford Probe, N/A. Part number 4405 is a practical choice when replacing a leaking, damaged, or inefficient condenser on a Ford Probe.
Key Features
- OE-style replacement condenser for original fit and function
- Aluminum construction for heat transfer efficiency
- Serpentine core design with extruded tubes for structural integrity
- Louvered aluminum fins bonded through furnace brazing for improved heat dissipation
- Individually pressure tested before release
- Quick connection inlet fitting and O-ring outlet fitting
- Multi-fit engineering without changing the look or fit
Product Details
The OSC Premium New Automotive Condenser is designed to match original equipment form and function while addressing common wear points found in aging cooling systems. Its aluminum core measures 22 mm thick, 24 13/16 in. wide, and 12 5/8 in. long, with a serpentine layout that supports efficient refrigerant cooling. The furnace-brazed aluminum fins and tubes are built to promote heat dissipation, while the extruded tube construction adds strength for long-term service.
This part cross-references APDI 7014405 for the same application. Use part number 4405 when searching for a replacement A/C condenser for Ford Probe models from 1993 through 1997.
Common Issues This Part May Solve
- Refrigerant leaks caused by a cracked or corroded condenser
- Reduced A/C cooling performance from restricted heat transfer
- Physical damage from road debris or front-end impact
- Cooling system inefficiency on higher-mileage Ford Probe vehicles
- Fitment problems from a worn or mismatched original condenser
Installation Notes and Tips
Verify inlet and outlet fitting style before installation: this condenser uses a quick connection inlet and an O-ring outlet. Inspect the surrounding A/C components, flush the system as needed, and replace any damaged seals or lines before charging the system. Confirm all mounting points and line routing match the original layout on your Ford Probe.
Quality Assurance
Each condenser is individually pressure tested and built from premium-grade aluminum materials to support durability and consistent performance. The design is engineered to address original design failures and improve service life in high-mileage vehicles.
