One Stop Solutions 4682 A/C Condenser
OE-Style A/C Condenser for Hyundai Accent
This One Stop Solutions A/C condenser is built for 1995-1999 Hyundai Accent applications and follows original equipment form and function. Part number 4682 uses an aluminum parallel-flow design to support efficient heat transfer and a direct-fit replacement profile.
- Fits 1995-1999 Hyundai Accent, N/A
- Aluminum construction for efficient heat transfer
- Parallel-flow core design
- Extruded condenser tubes for structural integrity
- Louvered aluminum fins with furnace-brazed tube bonding
- Individually pressure tested before release
- Multi-fit engineering for OE-style fit and appearance
- Block inlet fitting and threaded outlet fitting
- No drier included
- No oil cooler included
Detailed Product Overview
Part number 4682 is a premium new automotive condenser engineered for the Hyundai Accent from 1995 through 1999. It measures 22 13/16 inches wide, 13 7/16 inches long, and 5/8 inch thick, with a parallel-flow core layout that supports consistent refrigerant cooling. The aluminum core, extruded tubes, and brazed fin construction are selected to maintain strength and promote heat dissipation in the HVAC system.
This condenser cross-references APDI 7014682 and Anchor 10292 for the same application. It is a practical choice when replacing a leaking, restricted, or damaged condenser on a Hyundai Accent, and part number 4682 is built to match OE-style fitment and connection points.
Common Replacement Reasons
- Refrigerant loss from a cracked or corroded condenser
- Reduced A/C performance from restricted airflow through the core
- Physical damage from road debris or front-end impact
- Cooling inefficiency caused by bent fins or internal blockage
- Leak diagnosis during A/C system service on a Hyundai Accent
Installation Notes
Verify inlet and outlet fitting types before installation: this unit uses a block fitting inlet and threaded outlet. Inspect the surrounding A/C components, flush the system as needed, and replace any contaminated refrigerant oil or damaged seals according to service procedures. Confirm condenser dimensions and mounting points against the original unit before charging the system.
Quality Assurance
Each condenser is individually pressure tested and built with aluminum construction to support heat transfer efficiency and consistent performance. The furnace-brazed tube-and-fin assembly is engineered for durability and reliable refrigerant cooling in OE-style service applications.
One Stop Solutions 4682 A/C Condenser
OE-Style A/C Condenser for Hyundai Accent
This One Stop Solutions A/C condenser is built for 1995-1999 Hyundai Accent applications and follows original equipment form and function. Part number 4682 uses an aluminum parallel-flow design to support efficient heat transfer and a direct-fit replacement profile.
- Fits 1995-1999 Hyundai Accent, N/A
- Aluminum construction for efficient heat transfer
- Parallel-flow core design
- Extruded condenser tubes for structural integrity
- Louvered aluminum fins with furnace-brazed tube bonding
- Individually pressure tested before release
- Multi-fit engineering for OE-style fit and appearance
- Block inlet fitting and threaded outlet fitting
- No drier included
- No oil cooler included
Detailed Product Overview
Part number 4682 is a premium new automotive condenser engineered for the Hyundai Accent from 1995 through 1999. It measures 22 13/16 inches wide, 13 7/16 inches long, and 5/8 inch thick, with a parallel-flow core layout that supports consistent refrigerant cooling. The aluminum core, extruded tubes, and brazed fin construction are selected to maintain strength and promote heat dissipation in the HVAC system.
This condenser cross-references APDI 7014682 and Anchor 10292 for the same application. It is a practical choice when replacing a leaking, restricted, or damaged condenser on a Hyundai Accent, and part number 4682 is built to match OE-style fitment and connection points.
Common Replacement Reasons
- Refrigerant loss from a cracked or corroded condenser
- Reduced A/C performance from restricted airflow through the core
- Physical damage from road debris or front-end impact
- Cooling inefficiency caused by bent fins or internal blockage
- Leak diagnosis during A/C system service on a Hyundai Accent
Installation Notes
Verify inlet and outlet fitting types before installation: this unit uses a block fitting inlet and threaded outlet. Inspect the surrounding A/C components, flush the system as needed, and replace any contaminated refrigerant oil or damaged seals according to service procedures. Confirm condenser dimensions and mounting points against the original unit before charging the system.
Quality Assurance
Each condenser is individually pressure tested and built with aluminum construction to support heat transfer efficiency and consistent performance. The furnace-brazed tube-and-fin assembly is engineered for durability and reliable refrigerant cooling in OE-style service applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style A/C Condenser for Hyundai Accent
This One Stop Solutions A/C condenser is built for 1995-1999 Hyundai Accent applications and follows original equipment form and function. Part number 4682 uses an aluminum parallel-flow design to support efficient heat transfer and a direct-fit replacement profile.
- Fits 1995-1999 Hyundai Accent, N/A
- Aluminum construction for efficient heat transfer
- Parallel-flow core design
- Extruded condenser tubes for structural integrity
- Louvered aluminum fins with furnace-brazed tube bonding
- Individually pressure tested before release
- Multi-fit engineering for OE-style fit and appearance
- Block inlet fitting and threaded outlet fitting
- No drier included
- No oil cooler included
Detailed Product Overview
Part number 4682 is a premium new automotive condenser engineered for the Hyundai Accent from 1995 through 1999. It measures 22 13/16 inches wide, 13 7/16 inches long, and 5/8 inch thick, with a parallel-flow core layout that supports consistent refrigerant cooling. The aluminum core, extruded tubes, and brazed fin construction are selected to maintain strength and promote heat dissipation in the HVAC system.
This condenser cross-references APDI 7014682 and Anchor 10292 for the same application. It is a practical choice when replacing a leaking, restricted, or damaged condenser on a Hyundai Accent, and part number 4682 is built to match OE-style fitment and connection points.
Common Replacement Reasons
- Refrigerant loss from a cracked or corroded condenser
- Reduced A/C performance from restricted airflow through the core
- Physical damage from road debris or front-end impact
- Cooling inefficiency caused by bent fins or internal blockage
- Leak diagnosis during A/C system service on a Hyundai Accent
Installation Notes
Verify inlet and outlet fitting types before installation: this unit uses a block fitting inlet and threaded outlet. Inspect the surrounding A/C components, flush the system as needed, and replace any contaminated refrigerant oil or damaged seals according to service procedures. Confirm condenser dimensions and mounting points against the original unit before charging the system.
Quality Assurance
Each condenser is individually pressure tested and built with aluminum construction to support heat transfer efficiency and consistent performance. The furnace-brazed tube-and-fin assembly is engineered for durability and reliable refrigerant cooling in OE-style service applications.
