Pagid 355043141 Disc Brake Pad Set - Front or Rear
Pagid Low-Metallic Brake Pad Set for Porsche
Pagid 355043141 is a low-metallic disc brake pad set built for European braking systems that use lower hydraulic line pressure. It is a direct-fit front or rear brake pad option for select Porsche 911, Boxster, and Cayman applications, with a focus on stable pedal response, controlled heat handling, and reduced brake dust.
The Pagid Low-Metallic line is aimed at European vehicles that need consistent braking performance with standard replacement fitment. For Porsche 911, Porsche Boxster, and Porsche Cayman owners, part number 355043141 provides a brake pad formulation matched to Brembo brake systems and prepared for wear indicator use where equipped.
Key Features
- Low-metallic friction material for European vehicle braking systems
- Standard replacement grade for everyday service use
- Chamfered edges for smoother pad engagement
- Pad shims included with adhesive-backed shim design
- Prepared for wear indicator use on equipped vehicles
- Brake system application: Brembo
- Outer and inner pad thickness: 17 mm
- Pad height: 90.1 mm; pad width: 121 mm
Detailed Product Overview
Pagid 355043141 is engineered for Porsche braking applications that benefit from low-metallic friction characteristics and consistent response under heat. The pad design supports the lower hydraulic line pressure commonly found in major European cars, helping maintain predictable braking feel in daily driving and spirited road use. This set is listed for front fitment on 1999-2000 Porsche 911, 2000-2004 Porsche Boxster, 2006-2012 Porsche Cayman, 2007-2013 Porsche 911, and 2007-2012 Porsche Boxster, plus rear fitment on 2001-2005 Porsche 911.
This part cross-references Brembo P65009 and P65009N for the same application. The Pagid 355043141 brake pad set is also identified by WVA number 23329.
What This Brake Pad Set Helps Address
- Brake fade during repeated stops
- Excessive brake dust buildup on wheels
- Uneven pad contact from worn or mismatched pads
- Reduced braking consistency in European performance vehicles
- Wear-indicator service needs on equipped Porsche brake systems
Installation Notes and Tips
Professional installation is recommended. Verify caliper type, axle position, and wear-indicator setup before service, since this pad is prepared for wear warning contact but does not include a sensor. Mounting hardware, abutment clips, and brake lubricant are not included. Confirm rotor condition and brake system compatibility with Brembo-equipped Porsche 911, Boxster, or Cayman models before installation.
Quality Assurance
Pagid Low-Metallic brake pads are built for standard replacement service in European applications and use a friction formulation intended to support heat dissipation and low dust output. Part number 355043141 is specified for select Porsche fitments and follows the dimensional and brake-system requirements listed above.
Original: $92.40
-65%$92.40
$32.34Pagid 355043141 Disc Brake Pad Set - Front or Rear
Pagid Low-Metallic Brake Pad Set for Porsche
Pagid 355043141 is a low-metallic disc brake pad set built for European braking systems that use lower hydraulic line pressure. It is a direct-fit front or rear brake pad option for select Porsche 911, Boxster, and Cayman applications, with a focus on stable pedal response, controlled heat handling, and reduced brake dust.
The Pagid Low-Metallic line is aimed at European vehicles that need consistent braking performance with standard replacement fitment. For Porsche 911, Porsche Boxster, and Porsche Cayman owners, part number 355043141 provides a brake pad formulation matched to Brembo brake systems and prepared for wear indicator use where equipped.
Key Features
- Low-metallic friction material for European vehicle braking systems
- Standard replacement grade for everyday service use
- Chamfered edges for smoother pad engagement
- Pad shims included with adhesive-backed shim design
- Prepared for wear indicator use on equipped vehicles
- Brake system application: Brembo
- Outer and inner pad thickness: 17 mm
- Pad height: 90.1 mm; pad width: 121 mm
Detailed Product Overview
Pagid 355043141 is engineered for Porsche braking applications that benefit from low-metallic friction characteristics and consistent response under heat. The pad design supports the lower hydraulic line pressure commonly found in major European cars, helping maintain predictable braking feel in daily driving and spirited road use. This set is listed for front fitment on 1999-2000 Porsche 911, 2000-2004 Porsche Boxster, 2006-2012 Porsche Cayman, 2007-2013 Porsche 911, and 2007-2012 Porsche Boxster, plus rear fitment on 2001-2005 Porsche 911.
This part cross-references Brembo P65009 and P65009N for the same application. The Pagid 355043141 brake pad set is also identified by WVA number 23329.
What This Brake Pad Set Helps Address
- Brake fade during repeated stops
- Excessive brake dust buildup on wheels
- Uneven pad contact from worn or mismatched pads
- Reduced braking consistency in European performance vehicles
- Wear-indicator service needs on equipped Porsche brake systems
Installation Notes and Tips
Professional installation is recommended. Verify caliper type, axle position, and wear-indicator setup before service, since this pad is prepared for wear warning contact but does not include a sensor. Mounting hardware, abutment clips, and brake lubricant are not included. Confirm rotor condition and brake system compatibility with Brembo-equipped Porsche 911, Boxster, or Cayman models before installation.
Quality Assurance
Pagid Low-Metallic brake pads are built for standard replacement service in European applications and use a friction formulation intended to support heat dissipation and low dust output. Part number 355043141 is specified for select Porsche fitments and follows the dimensional and brake-system requirements listed above.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Pagid Low-Metallic Brake Pad Set for Porsche
Pagid 355043141 is a low-metallic disc brake pad set built for European braking systems that use lower hydraulic line pressure. It is a direct-fit front or rear brake pad option for select Porsche 911, Boxster, and Cayman applications, with a focus on stable pedal response, controlled heat handling, and reduced brake dust.
The Pagid Low-Metallic line is aimed at European vehicles that need consistent braking performance with standard replacement fitment. For Porsche 911, Porsche Boxster, and Porsche Cayman owners, part number 355043141 provides a brake pad formulation matched to Brembo brake systems and prepared for wear indicator use where equipped.
Key Features
- Low-metallic friction material for European vehicle braking systems
- Standard replacement grade for everyday service use
- Chamfered edges for smoother pad engagement
- Pad shims included with adhesive-backed shim design
- Prepared for wear indicator use on equipped vehicles
- Brake system application: Brembo
- Outer and inner pad thickness: 17 mm
- Pad height: 90.1 mm; pad width: 121 mm
Detailed Product Overview
Pagid 355043141 is engineered for Porsche braking applications that benefit from low-metallic friction characteristics and consistent response under heat. The pad design supports the lower hydraulic line pressure commonly found in major European cars, helping maintain predictable braking feel in daily driving and spirited road use. This set is listed for front fitment on 1999-2000 Porsche 911, 2000-2004 Porsche Boxster, 2006-2012 Porsche Cayman, 2007-2013 Porsche 911, and 2007-2012 Porsche Boxster, plus rear fitment on 2001-2005 Porsche 911.
This part cross-references Brembo P65009 and P65009N for the same application. The Pagid 355043141 brake pad set is also identified by WVA number 23329.
What This Brake Pad Set Helps Address
- Brake fade during repeated stops
- Excessive brake dust buildup on wheels
- Uneven pad contact from worn or mismatched pads
- Reduced braking consistency in European performance vehicles
- Wear-indicator service needs on equipped Porsche brake systems
Installation Notes and Tips
Professional installation is recommended. Verify caliper type, axle position, and wear-indicator setup before service, since this pad is prepared for wear warning contact but does not include a sensor. Mounting hardware, abutment clips, and brake lubricant are not included. Confirm rotor condition and brake system compatibility with Brembo-equipped Porsche 911, Boxster, or Cayman models before installation.
Quality Assurance
Pagid Low-Metallic brake pads are built for standard replacement service in European applications and use a friction formulation intended to support heat dissipation and low dust output. Part number 355043141 is specified for select Porsche fitments and follows the dimensional and brake-system requirements listed above.
