Pagid 355043471 Disc Brake Pad Set - Rear
Pagid Low-Metallic Rear Brake Pads
Pagid brake pad set 355043471 is a low-metallic disc brake pad set built for rear brake service on select European vehicles. It is engineered for Brembo brake systems and tuned for the lower hydraulic line pressure commonly found in major European cars, with a focus on stable stopping performance, heat management, and reduced brake dust.
Fits 2007-2013 Porsche 911, rear. This application-specific fitment makes Pagid 355043471 a direct replacement choice for Porsche 911 rear brake pad service across the listed model years.
Key Features
- Low-metallic friction material for European braking systems
- Standard replacement grade for routine brake service
- Chamfered edges for smoother pad engagement
- Pad shims included with adhesive-backed shim design
- Prepared for wear indicator use
- Brake system application: Brembo
- Outer and inner pad friction thickness: 17 mm
- Pad height: 75.5 mm; pad width: 130.5 mm
- WVA number 24454 for catalog matching
Product Details
Pagid 355043471 is part of the Low-Metallic line, a product family focused on European vehicle braking requirements. The friction material is formulated to work with lower hydraulic line pressure while maintaining consistent pedal response and controlled heat dissipation. The pad design also emphasizes minimal brake dust, which helps keep wheel maintenance more manageable during normal street use. For Porsche 911 rear brake pad replacement, this part number provides a cataloged fit for 2007-2013 models with Brembo brake systems.
This part cross-references Brembo P65022N for the same application.
Common Issues It Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise related to pad wear or uneven pad contact
- Excessive brake dust from aging friction material
- Loss of consistent pedal feel during normal braking
- Need for a direct-fit rear pad replacement on a Porsche 911
Installation Notes
Professional installation is recommended. The pad set is prepared for a wear indicator, but a wear sensor is not included. Mounting hardware, brake lubricant, and abutment clips are not included. Verify rotor condition, caliper operation, and brake system compatibility before installation. Because this is a brake component, assembly and disassembly should be performed by qualified personnel.
Quality Assurance
Pagid brake pads are engineered for European braking systems and built around application-specific friction characteristics, pad geometry, and heat management. This part is intended as a standard replacement for the listed Porsche 911 rear fitment and Brembo brake system configuration.
Pagid 355043471 Disc Brake Pad Set - Rear
Pagid Low-Metallic Rear Brake Pads
Pagid brake pad set 355043471 is a low-metallic disc brake pad set built for rear brake service on select European vehicles. It is engineered for Brembo brake systems and tuned for the lower hydraulic line pressure commonly found in major European cars, with a focus on stable stopping performance, heat management, and reduced brake dust.
Fits 2007-2013 Porsche 911, rear. This application-specific fitment makes Pagid 355043471 a direct replacement choice for Porsche 911 rear brake pad service across the listed model years.
Key Features
- Low-metallic friction material for European braking systems
- Standard replacement grade for routine brake service
- Chamfered edges for smoother pad engagement
- Pad shims included with adhesive-backed shim design
- Prepared for wear indicator use
- Brake system application: Brembo
- Outer and inner pad friction thickness: 17 mm
- Pad height: 75.5 mm; pad width: 130.5 mm
- WVA number 24454 for catalog matching
Product Details
Pagid 355043471 is part of the Low-Metallic line, a product family focused on European vehicle braking requirements. The friction material is formulated to work with lower hydraulic line pressure while maintaining consistent pedal response and controlled heat dissipation. The pad design also emphasizes minimal brake dust, which helps keep wheel maintenance more manageable during normal street use. For Porsche 911 rear brake pad replacement, this part number provides a cataloged fit for 2007-2013 models with Brembo brake systems.
This part cross-references Brembo P65022N for the same application.
Common Issues It Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise related to pad wear or uneven pad contact
- Excessive brake dust from aging friction material
- Loss of consistent pedal feel during normal braking
- Need for a direct-fit rear pad replacement on a Porsche 911
Installation Notes
Professional installation is recommended. The pad set is prepared for a wear indicator, but a wear sensor is not included. Mounting hardware, brake lubricant, and abutment clips are not included. Verify rotor condition, caliper operation, and brake system compatibility before installation. Because this is a brake component, assembly and disassembly should be performed by qualified personnel.
Quality Assurance
Pagid brake pads are engineered for European braking systems and built around application-specific friction characteristics, pad geometry, and heat management. This part is intended as a standard replacement for the listed Porsche 911 rear fitment and Brembo brake system configuration.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Pagid Low-Metallic Rear Brake Pads
Pagid brake pad set 355043471 is a low-metallic disc brake pad set built for rear brake service on select European vehicles. It is engineered for Brembo brake systems and tuned for the lower hydraulic line pressure commonly found in major European cars, with a focus on stable stopping performance, heat management, and reduced brake dust.
Fits 2007-2013 Porsche 911, rear. This application-specific fitment makes Pagid 355043471 a direct replacement choice for Porsche 911 rear brake pad service across the listed model years.
Key Features
- Low-metallic friction material for European braking systems
- Standard replacement grade for routine brake service
- Chamfered edges for smoother pad engagement
- Pad shims included with adhesive-backed shim design
- Prepared for wear indicator use
- Brake system application: Brembo
- Outer and inner pad friction thickness: 17 mm
- Pad height: 75.5 mm; pad width: 130.5 mm
- WVA number 24454 for catalog matching
Product Details
Pagid 355043471 is part of the Low-Metallic line, a product family focused on European vehicle braking requirements. The friction material is formulated to work with lower hydraulic line pressure while maintaining consistent pedal response and controlled heat dissipation. The pad design also emphasizes minimal brake dust, which helps keep wheel maintenance more manageable during normal street use. For Porsche 911 rear brake pad replacement, this part number provides a cataloged fit for 2007-2013 models with Brembo brake systems.
This part cross-references Brembo P65022N for the same application.
Common Issues It Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise related to pad wear or uneven pad contact
- Excessive brake dust from aging friction material
- Loss of consistent pedal feel during normal braking
- Need for a direct-fit rear pad replacement on a Porsche 911
Installation Notes
Professional installation is recommended. The pad set is prepared for a wear indicator, but a wear sensor is not included. Mounting hardware, brake lubricant, and abutment clips are not included. Verify rotor condition, caliper operation, and brake system compatibility before installation. Because this is a brake component, assembly and disassembly should be performed by qualified personnel.
Quality Assurance
Pagid brake pads are engineered for European braking systems and built around application-specific friction characteristics, pad geometry, and heat management. This part is intended as a standard replacement for the listed Porsche 911 rear fitment and Brembo brake system configuration.
